![Updated Audio Editing in FCP Tips, Tricks, and Best Practices](https://www.lifewire.com/thmb/LszZcaAEzHRXWm3K0xWEG-T8gus=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/handstypingonkeyboardCROPPED-6b13200ac0d24ef58817343cc4975ebd.jpg)
Updated Audio Editing in FCP Tips, Tricks, and Best Practices
![](/images/site-logo.png)
Audio Editing in FCP: Tips, Tricks, and Best Practices
How to Edit Audio of a Video on FCP
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Make Stunning Videos in Minutes: WeVideo Online Editor
WeVideo: Easily Create Videos Online
Ollie Mattison
Mar 27, 2024• Proven solutions
If you’re looking for a web application to create and edit your videos, WeVideo is perhaps what you need. This online platform enables you to create videos in the cloud. That is to say, every single feature is accessible online, so you don’t have to download other software. Below is a get-starting guide for WeVideo. Follow it to easily create videos online.
#1 Sign in WeVideo
It’s free to get started with WeVideo. You just need to make an account by providing an email address, and creating a username and password. You can also sign in with your preexisting Facebook, Yahoo or Gmail account.
#2 Import your photos or videos to WeVideo
Then click Upload Media in the _Storyboar_d tab or go to the Upload tab to import the photos and video clips from your computer or media accounts. You can also hit Record and connect your own camera device to record a video clip.
Tip: WeVideo provides three editing modes (Storyboard, Standard Timeline and Advanced Timeline). You can switch between modes by clicking the triangle icon in the upper right corner of the screen in the editor.
#3 Polish your WeVideo creation
After that, drag and drop your contents in any order you want. This will help you to organize your contents. Then you edit the video as you like. For example, you can trim your video clips to focus on some key moments or and cut a long video into smaller ones. You can also add text, effects, music, and graphics to your videos. Or go to the Theme tab to add some creative themes to your creation.
#4 Publish your videos
After finishing your creation, go to Publish to upload your videos directly to YouTube, Google Drive, Facebook, and Twitter. You can even change the video resolution or set your content’s visibility by choosing options like “private or public”.
Although WeVideo provides some basic video editing functions, there are many features present in desktop video editors that WeVideo doesn’t offer, such as slow and fast motion and noise removal, to name a few. If you want to create a more professional video, Wondershare Filmora (originally Wondershare Video Editor) is highly recommended. This user friendly video editing tool has a bunch of special features which allow you to easily put together your video clips, text and music. You can apply different effects like filters, picture-in-picture, transitions and many more to get that professional look out of your videos in mere minutes. Here you can get more details about this Video Editor.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you’re looking for a web application to create and edit your videos, WeVideo is perhaps what you need. This online platform enables you to create videos in the cloud. That is to say, every single feature is accessible online, so you don’t have to download other software. Below is a get-starting guide for WeVideo. Follow it to easily create videos online.
#1 Sign in WeVideo
It’s free to get started with WeVideo. You just need to make an account by providing an email address, and creating a username and password. You can also sign in with your preexisting Facebook, Yahoo or Gmail account.
#2 Import your photos or videos to WeVideo
Then click Upload Media in the _Storyboar_d tab or go to the Upload tab to import the photos and video clips from your computer or media accounts. You can also hit Record and connect your own camera device to record a video clip.
Tip: WeVideo provides three editing modes (Storyboard, Standard Timeline and Advanced Timeline). You can switch between modes by clicking the triangle icon in the upper right corner of the screen in the editor.
#3 Polish your WeVideo creation
After that, drag and drop your contents in any order you want. This will help you to organize your contents. Then you edit the video as you like. For example, you can trim your video clips to focus on some key moments or and cut a long video into smaller ones. You can also add text, effects, music, and graphics to your videos. Or go to the Theme tab to add some creative themes to your creation.
#4 Publish your videos
After finishing your creation, go to Publish to upload your videos directly to YouTube, Google Drive, Facebook, and Twitter. You can even change the video resolution or set your content’s visibility by choosing options like “private or public”.
Although WeVideo provides some basic video editing functions, there are many features present in desktop video editors that WeVideo doesn’t offer, such as slow and fast motion and noise removal, to name a few. If you want to create a more professional video, Wondershare Filmora (originally Wondershare Video Editor) is highly recommended. This user friendly video editing tool has a bunch of special features which allow you to easily put together your video clips, text and music. You can apply different effects like filters, picture-in-picture, transitions and many more to get that professional look out of your videos in mere minutes. Here you can get more details about this Video Editor.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you’re looking for a web application to create and edit your videos, WeVideo is perhaps what you need. This online platform enables you to create videos in the cloud. That is to say, every single feature is accessible online, so you don’t have to download other software. Below is a get-starting guide for WeVideo. Follow it to easily create videos online.
#1 Sign in WeVideo
It’s free to get started with WeVideo. You just need to make an account by providing an email address, and creating a username and password. You can also sign in with your preexisting Facebook, Yahoo or Gmail account.
#2 Import your photos or videos to WeVideo
Then click Upload Media in the _Storyboar_d tab or go to the Upload tab to import the photos and video clips from your computer or media accounts. You can also hit Record and connect your own camera device to record a video clip.
Tip: WeVideo provides three editing modes (Storyboard, Standard Timeline and Advanced Timeline). You can switch between modes by clicking the triangle icon in the upper right corner of the screen in the editor.
#3 Polish your WeVideo creation
After that, drag and drop your contents in any order you want. This will help you to organize your contents. Then you edit the video as you like. For example, you can trim your video clips to focus on some key moments or and cut a long video into smaller ones. You can also add text, effects, music, and graphics to your videos. Or go to the Theme tab to add some creative themes to your creation.
#4 Publish your videos
After finishing your creation, go to Publish to upload your videos directly to YouTube, Google Drive, Facebook, and Twitter. You can even change the video resolution or set your content’s visibility by choosing options like “private or public”.
Although WeVideo provides some basic video editing functions, there are many features present in desktop video editors that WeVideo doesn’t offer, such as slow and fast motion and noise removal, to name a few. If you want to create a more professional video, Wondershare Filmora (originally Wondershare Video Editor) is highly recommended. This user friendly video editing tool has a bunch of special features which allow you to easily put together your video clips, text and music. You can apply different effects like filters, picture-in-picture, transitions and many more to get that professional look out of your videos in mere minutes. Here you can get more details about this Video Editor.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If you’re looking for a web application to create and edit your videos, WeVideo is perhaps what you need. This online platform enables you to create videos in the cloud. That is to say, every single feature is accessible online, so you don’t have to download other software. Below is a get-starting guide for WeVideo. Follow it to easily create videos online.
#1 Sign in WeVideo
It’s free to get started with WeVideo. You just need to make an account by providing an email address, and creating a username and password. You can also sign in with your preexisting Facebook, Yahoo or Gmail account.
#2 Import your photos or videos to WeVideo
Then click Upload Media in the _Storyboar_d tab or go to the Upload tab to import the photos and video clips from your computer or media accounts. You can also hit Record and connect your own camera device to record a video clip.
Tip: WeVideo provides three editing modes (Storyboard, Standard Timeline and Advanced Timeline). You can switch between modes by clicking the triangle icon in the upper right corner of the screen in the editor.
#3 Polish your WeVideo creation
After that, drag and drop your contents in any order you want. This will help you to organize your contents. Then you edit the video as you like. For example, you can trim your video clips to focus on some key moments or and cut a long video into smaller ones. You can also add text, effects, music, and graphics to your videos. Or go to the Theme tab to add some creative themes to your creation.
#4 Publish your videos
After finishing your creation, go to Publish to upload your videos directly to YouTube, Google Drive, Facebook, and Twitter. You can even change the video resolution or set your content’s visibility by choosing options like “private or public”.
Although WeVideo provides some basic video editing functions, there are many features present in desktop video editors that WeVideo doesn’t offer, such as slow and fast motion and noise removal, to name a few. If you want to create a more professional video, Wondershare Filmora (originally Wondershare Video Editor) is highly recommended. This user friendly video editing tool has a bunch of special features which allow you to easily put together your video clips, text and music. You can apply different effects like filters, picture-in-picture, transitions and many more to get that professional look out of your videos in mere minutes. Here you can get more details about this Video Editor.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
The Ultimate Guide to Cloud-Based Stop Motion Animation Software
Creating a stop motion video is a fascinating process. If you use the right software and know the basics of making videos, you can create fantastic animations. While creating a stop motion video, there are things to keep in mind, like keeping the cameras steady and using the proper audio effects. Cloud Stop motion is well-known software with the tools to create unique video projects on your smartphone, laptop, desktop, Chromebook, or even tablet.
Part 1. Introduction- Cloud Stop Motion
It is easy to create stop motion animation with this web-based app. To use cloud stop motion you must first create an account and grant the app permission to your computer’s webcam. Then you can start a new project and start taking pictures.
Each image is displayed on the timeline to know all photos that are going to be included in the stop motion video. On Cloud Stop Motion, you have the option to either record or import audio files from the sound library or your device. You can add additional things, like opening titles, end credits, speech bubbles, and text overlays. It functions directly in the browser on any modern device.
You do not have to install anything. It is all saved to the cloud. You can work with your animation on a zoomable, scrollable timeline.
Features -
- Easy to use, powerful, and intuitive software to create animations.
- The Interface has a modern design.
- It is equipped with a rich audio library, backgrounds and styles included.
- You can switch devices seamlessly at any point.
Part 2. How to Use Cloud Stop Motion to Create Animation Videos?
Cloud Stop Motion is a great browser-based app that one can use to create fun animation videos. You can use Cloud Stop Motion even when you have not created your account. But consider creating an account to enjoy additional features.
Before you open Cloud Stop Motion and start clicking pictures of your subject for your video, it is important to have a story in mind. So, create a storyboard to break down your stop motion video. You can sketch your plan frame by frame or write bulleted list of your frames. It will help you create your project efficiently, ensuring that you have taken pictures of all the frames that you need to tell your story.
Step 1: Once you have created your storyboard, open the app to go to the Cloud Stop Motion dashboard. Click on the new project button. Cloud Stop Motion needs access to your camera for capturing images. So, allow camera access.
On the dashboard, go to the taking picture menu. Now place the subject at the center of your frame. Capture a few test shots to find the composition that you like. You can see the picture at the bottom of the timeline. If needed, adjust the position of your subject. Make sure that the location you choose has plenty of light. If not, you also use a lamp for good light.
Tip: Keeping your phone or camera steady while making your stop-motion project is the key. You can use a tripod, a selfie stick, or a gimbal to keep your device as still as possible. If you don’t own any of these, keep your device on something sturdy and make sure that you do not change its place until you capture all the images needed for your project. This way all your shots will be consistent.
Step 2: Move your subject or change its position and take a picture. Repeat the process until you complete your story. To make your stop-motion smooth, make small changes to the position of your subject between shots.
You can also add more frames per second. Generally, you should add 10 frames per second. But you can go for 25 frames per second to make a smoother video. All the pictures you snap are automatically added to the editor in chronological order.
Step 3: Once you have captured images for your project, add sound by going to the sound menu in the top left of the dashboard. You can record sounds, upload sounds, or select sounds from Cloud Stop Motion’s gallery. You can also add text to your Cloud Stop Motion project if you want.
Step 4: Click on play button to preview your project and see if your motion picture turned out as per your liking or not. If you do not like something, go back and make changes. Once done, download your video from cloudstop motion.
Part 3. 3 Alternatives for Cloud Stop Motion
Are you ready to turn your video clips and images into a stop motion movie? Have a look at all these software that can create animations wonderfully well. You can share the animations with your friends on social media platforms. The stop motion effect is ideal for action videos.
1. Stop Motion Animator
It is a simple tool for creating stop motion animation sequences using a webcam. You can save the animation as a video file in the widely-supported webm format. The videos previously saved can be loaded into the app and extended. Stop Motion Animator is free software that lets you create fantastic stop motion videos. It is an open-source, non-commercial app.
It does not collect any data, and it does not connect to the internet at all.
2. Kapwig
Whether you’re a beginner video creator or advanced, Kapwing is the right tool to create stop motion animation. It is an all-in-one online video studio as it has an intuitive timeline, advanced editor, and plugin ecosystem that will help you make next-level videos.
Kapwing Studio supports many different file types like MP4, MOV, AVI, 3GP. Record video clips, add voiceovers and add images and texts to create a fresh stop motion video. Then you can edit them in the browser from any device. If you like how the final video looks, click “Export.” Download the MP4 file directly, publish the video on social media, or share the link with your friends.
You can customize the output video size in 1:1, 9:16, 16:9, 4:5, or 5:4. Sign in to the Kapwing account to remove the watermark.
3. Clideo
Clideo is a high-speed stop motion maker with an easy-to-use dashboard and instant download. It is compatible with almost all the video formats such as AVI, MPG, VOB, WMV, MOV, and more. When creating a stop motion, you can choose from various frame and clip rates available. They slow down, speed up or maintain the same speed for your video. The interface is intuitive, so you don’t have to have experience using the stop motion editor.
Just upload a video file from your device- whether it’s a computer, iPhone, or android phone. Apply the effects that go with your movie. You can watch the final result and click the “Download” button.
Closing Word
Recording and editing stop motion animation has never been easier. You can thousands of images and create video projects quickly on Cloud stop motion.
Each software we include in this article grants you access to all the necessary tools you’ll need while creating a stop motion animation. Are you impressed with cloud stop motion or one of the alternatives? Leave a comment and let us know.
Part 2. How to Use Cloud Stop Motion to Create Animation Videos?
Cloud Stop Motion is a great browser-based app that one can use to create fun animation videos. You can use Cloud Stop Motion even when you have not created your account. But consider creating an account to enjoy additional features.
Before you open Cloud Stop Motion and start clicking pictures of your subject for your video, it is important to have a story in mind. So, create a storyboard to break down your stop motion video. You can sketch your plan frame by frame or write bulleted list of your frames. It will help you create your project efficiently, ensuring that you have taken pictures of all the frames that you need to tell your story.
Step 1: Once you have created your storyboard, open the app to go to the Cloud Stop Motion dashboard. Click on the new project button. Cloud Stop Motion needs access to your camera for capturing images. So, allow camera access.
On the dashboard, go to the taking picture menu. Now place the subject at the center of your frame. Capture a few test shots to find the composition that you like. You can see the picture at the bottom of the timeline. If needed, adjust the position of your subject. Make sure that the location you choose has plenty of light. If not, you also use a lamp for good light.
Tip: Keeping your phone or camera steady while making your stop-motion project is the key. You can use a tripod, a selfie stick, or a gimbal to keep your device as still as possible. If you don’t own any of these, keep your device on something sturdy and make sure that you do not change its place until you capture all the images needed for your project. This way all your shots will be consistent.
Step 2: Move your subject or change its position and take a picture. Repeat the process until you complete your story. To make your stop-motion smooth, make small changes to the position of your subject between shots.
You can also add more frames per second. Generally, you should add 10 frames per second. But you can go for 25 frames per second to make a smoother video. All the pictures you snap are automatically added to the editor in chronological order.
Step 3: Once you have captured images for your project, add sound by going to the sound menu in the top left of the dashboard. You can record sounds, upload sounds, or select sounds from Cloud Stop Motion’s gallery. You can also add text to your Cloud Stop Motion project if you want.
Step 4: Click on play button to preview your project and see if your motion picture turned out as per your liking or not. If you do not like something, go back and make changes. Once done, download your video from cloudstop motion.
Part 3. 3 Alternatives for Cloud Stop Motion
Are you ready to turn your video clips and images into a stop motion movie? Have a look at all these software that can create animations wonderfully well. You can share the animations with your friends on social media platforms. The stop motion effect is ideal for action videos.
1. Stop Motion Animator
It is a simple tool for creating stop motion animation sequences using a webcam. You can save the animation as a video file in the widely-supported webm format. The videos previously saved can be loaded into the app and extended. Stop Motion Animator is free software that lets you create fantastic stop motion videos. It is an open-source, non-commercial app.
It does not collect any data, and it does not connect to the internet at all.
2. Kapwig
Whether you’re a beginner video creator or advanced, Kapwing is the right tool to create stop motion animation. It is an all-in-one online video studio as it has an intuitive timeline, advanced editor, and plugin ecosystem that will help you make next-level videos.
Kapwing Studio supports many different file types like MP4, MOV, AVI, 3GP. Record video clips, add voiceovers and add images and texts to create a fresh stop motion video. Then you can edit them in the browser from any device. If you like how the final video looks, click “Export.” Download the MP4 file directly, publish the video on social media, or share the link with your friends.
You can customize the output video size in 1:1, 9:16, 16:9, 4:5, or 5:4. Sign in to the Kapwing account to remove the watermark.
3. Clideo
Clideo is a high-speed stop motion maker with an easy-to-use dashboard and instant download. It is compatible with almost all the video formats such as AVI, MPG, VOB, WMV, MOV, and more. When creating a stop motion, you can choose from various frame and clip rates available. They slow down, speed up or maintain the same speed for your video. The interface is intuitive, so you don’t have to have experience using the stop motion editor.
Just upload a video file from your device- whether it’s a computer, iPhone, or android phone. Apply the effects that go with your movie. You can watch the final result and click the “Download” button.
Closing Word
Recording and editing stop motion animation has never been easier. You can thousands of images and create video projects quickly on Cloud stop motion.
Each software we include in this article grants you access to all the necessary tools you’ll need while creating a stop motion animation. Are you impressed with cloud stop motion or one of the alternatives? Leave a comment and let us know.
Part 2. How to Use Cloud Stop Motion to Create Animation Videos?
Cloud Stop Motion is a great browser-based app that one can use to create fun animation videos. You can use Cloud Stop Motion even when you have not created your account. But consider creating an account to enjoy additional features.
Before you open Cloud Stop Motion and start clicking pictures of your subject for your video, it is important to have a story in mind. So, create a storyboard to break down your stop motion video. You can sketch your plan frame by frame or write bulleted list of your frames. It will help you create your project efficiently, ensuring that you have taken pictures of all the frames that you need to tell your story.
Step 1: Once you have created your storyboard, open the app to go to the Cloud Stop Motion dashboard. Click on the new project button. Cloud Stop Motion needs access to your camera for capturing images. So, allow camera access.
On the dashboard, go to the taking picture menu. Now place the subject at the center of your frame. Capture a few test shots to find the composition that you like. You can see the picture at the bottom of the timeline. If needed, adjust the position of your subject. Make sure that the location you choose has plenty of light. If not, you also use a lamp for good light.
Tip: Keeping your phone or camera steady while making your stop-motion project is the key. You can use a tripod, a selfie stick, or a gimbal to keep your device as still as possible. If you don’t own any of these, keep your device on something sturdy and make sure that you do not change its place until you capture all the images needed for your project. This way all your shots will be consistent.
Step 2: Move your subject or change its position and take a picture. Repeat the process until you complete your story. To make your stop-motion smooth, make small changes to the position of your subject between shots.
You can also add more frames per second. Generally, you should add 10 frames per second. But you can go for 25 frames per second to make a smoother video. All the pictures you snap are automatically added to the editor in chronological order.
Step 3: Once you have captured images for your project, add sound by going to the sound menu in the top left of the dashboard. You can record sounds, upload sounds, or select sounds from Cloud Stop Motion’s gallery. You can also add text to your Cloud Stop Motion project if you want.
Step 4: Click on play button to preview your project and see if your motion picture turned out as per your liking or not. If you do not like something, go back and make changes. Once done, download your video from cloudstop motion.
Part 3. 3 Alternatives for Cloud Stop Motion
Are you ready to turn your video clips and images into a stop motion movie? Have a look at all these software that can create animations wonderfully well. You can share the animations with your friends on social media platforms. The stop motion effect is ideal for action videos.
1. Stop Motion Animator
It is a simple tool for creating stop motion animation sequences using a webcam. You can save the animation as a video file in the widely-supported webm format. The videos previously saved can be loaded into the app and extended. Stop Motion Animator is free software that lets you create fantastic stop motion videos. It is an open-source, non-commercial app.
It does not collect any data, and it does not connect to the internet at all.
2. Kapwig
Whether you’re a beginner video creator or advanced, Kapwing is the right tool to create stop motion animation. It is an all-in-one online video studio as it has an intuitive timeline, advanced editor, and plugin ecosystem that will help you make next-level videos.
Kapwing Studio supports many different file types like MP4, MOV, AVI, 3GP. Record video clips, add voiceovers and add images and texts to create a fresh stop motion video. Then you can edit them in the browser from any device. If you like how the final video looks, click “Export.” Download the MP4 file directly, publish the video on social media, or share the link with your friends.
You can customize the output video size in 1:1, 9:16, 16:9, 4:5, or 5:4. Sign in to the Kapwing account to remove the watermark.
3. Clideo
Clideo is a high-speed stop motion maker with an easy-to-use dashboard and instant download. It is compatible with almost all the video formats such as AVI, MPG, VOB, WMV, MOV, and more. When creating a stop motion, you can choose from various frame and clip rates available. They slow down, speed up or maintain the same speed for your video. The interface is intuitive, so you don’t have to have experience using the stop motion editor.
Just upload a video file from your device- whether it’s a computer, iPhone, or android phone. Apply the effects that go with your movie. You can watch the final result and click the “Download” button.
Closing Word
Recording and editing stop motion animation has never been easier. You can thousands of images and create video projects quickly on Cloud stop motion.
Each software we include in this article grants you access to all the necessary tools you’ll need while creating a stop motion animation. Are you impressed with cloud stop motion or one of the alternatives? Leave a comment and let us know.
Part 2. How to Use Cloud Stop Motion to Create Animation Videos?
Cloud Stop Motion is a great browser-based app that one can use to create fun animation videos. You can use Cloud Stop Motion even when you have not created your account. But consider creating an account to enjoy additional features.
Before you open Cloud Stop Motion and start clicking pictures of your subject for your video, it is important to have a story in mind. So, create a storyboard to break down your stop motion video. You can sketch your plan frame by frame or write bulleted list of your frames. It will help you create your project efficiently, ensuring that you have taken pictures of all the frames that you need to tell your story.
Step 1: Once you have created your storyboard, open the app to go to the Cloud Stop Motion dashboard. Click on the new project button. Cloud Stop Motion needs access to your camera for capturing images. So, allow camera access.
On the dashboard, go to the taking picture menu. Now place the subject at the center of your frame. Capture a few test shots to find the composition that you like. You can see the picture at the bottom of the timeline. If needed, adjust the position of your subject. Make sure that the location you choose has plenty of light. If not, you also use a lamp for good light.
Tip: Keeping your phone or camera steady while making your stop-motion project is the key. You can use a tripod, a selfie stick, or a gimbal to keep your device as still as possible. If you don’t own any of these, keep your device on something sturdy and make sure that you do not change its place until you capture all the images needed for your project. This way all your shots will be consistent.
Step 2: Move your subject or change its position and take a picture. Repeat the process until you complete your story. To make your stop-motion smooth, make small changes to the position of your subject between shots.
You can also add more frames per second. Generally, you should add 10 frames per second. But you can go for 25 frames per second to make a smoother video. All the pictures you snap are automatically added to the editor in chronological order.
Step 3: Once you have captured images for your project, add sound by going to the sound menu in the top left of the dashboard. You can record sounds, upload sounds, or select sounds from Cloud Stop Motion’s gallery. You can also add text to your Cloud Stop Motion project if you want.
Step 4: Click on play button to preview your project and see if your motion picture turned out as per your liking or not. If you do not like something, go back and make changes. Once done, download your video from cloudstop motion.
Part 3. 3 Alternatives for Cloud Stop Motion
Are you ready to turn your video clips and images into a stop motion movie? Have a look at all these software that can create animations wonderfully well. You can share the animations with your friends on social media platforms. The stop motion effect is ideal for action videos.
1. Stop Motion Animator
It is a simple tool for creating stop motion animation sequences using a webcam. You can save the animation as a video file in the widely-supported webm format. The videos previously saved can be loaded into the app and extended. Stop Motion Animator is free software that lets you create fantastic stop motion videos. It is an open-source, non-commercial app.
It does not collect any data, and it does not connect to the internet at all.
2. Kapwig
Whether you’re a beginner video creator or advanced, Kapwing is the right tool to create stop motion animation. It is an all-in-one online video studio as it has an intuitive timeline, advanced editor, and plugin ecosystem that will help you make next-level videos.
Kapwing Studio supports many different file types like MP4, MOV, AVI, 3GP. Record video clips, add voiceovers and add images and texts to create a fresh stop motion video. Then you can edit them in the browser from any device. If you like how the final video looks, click “Export.” Download the MP4 file directly, publish the video on social media, or share the link with your friends.
You can customize the output video size in 1:1, 9:16, 16:9, 4:5, or 5:4. Sign in to the Kapwing account to remove the watermark.
3. Clideo
Clideo is a high-speed stop motion maker with an easy-to-use dashboard and instant download. It is compatible with almost all the video formats such as AVI, MPG, VOB, WMV, MOV, and more. When creating a stop motion, you can choose from various frame and clip rates available. They slow down, speed up or maintain the same speed for your video. The interface is intuitive, so you don’t have to have experience using the stop motion editor.
Just upload a video file from your device- whether it’s a computer, iPhone, or android phone. Apply the effects that go with your movie. You can watch the final result and click the “Download” button.
Closing Word
Recording and editing stop motion animation has never been easier. You can thousands of images and create video projects quickly on Cloud stop motion.
Each software we include in this article grants you access to all the necessary tools you’ll need while creating a stop motion animation. Are you impressed with cloud stop motion or one of the alternatives? Leave a comment and let us know.
Unlock Cross-Platform Video Editing: Run Windows & Mac Apps on Chromebook
How to Run Windows and Mac OS Video Editing Apps on Your Chromebook
Ollie Mattison
Mar 27, 2024• Proven solutions
Generally, for the same price, you will be able to get a better build quality, longger battery life and lighter Chromebook, compared to Mac and PC. However, it is a common knowledge that Chromebooks don’t support Windows or Mac video applications or any other apps that aren’t designed for the Chrome OS. But, if you are looking for a way to edit your videos from a Chromebook do not despair because there is a way to use Windows or Mac software. Instead of being forced to use online editors that often provide just a few basic editing options Chromebook users can access editing software that is compatible with Mac or Windows OS. There is more than just one way to gain access to Mac and Windows programs, although before getting your hopes up, you should first check if the Chromebook model you have allows you to install the necessary software.
These solutions may not be obvious, but using them may enable you to use professional editing software that is available for Mac and Windows operating systems. Let’s see how you can run Filmora, Final Cut Pro, Sony Vegas Pro or any other powerful video editing software from your Chromebook.
You may also want to know:
Part 1: How to Run Windows and Mac OS Video Editing Apps on Chromebook
As we already mentioned there are two different ways to run Mac and Windows OS video editing apps from your Chromebook, although one method is much less complicated than the other. Let’s have a look at the methods that will enable you to gain access to all applications you need to create stunning videos.
Method 1: Accessing with Chromebook Desktop Remote
A simple app that is available at the Google Play Store for free will enable you to access a remote computer and use any programs installed on it from your Chromebook. There are many applications similar to Chrome Desktop Remote, but we chose it because it is simple to use, very effective and completely free.
1.Install Chromebook Desktop Remote
The first step is to install the Chrome Desktop Remote app on both the computers you want to pair with and your Chromebook. After the application is installed, you will be presented with two options in the app’s main screen Remote Assistance and My Computers.
Choose the My Computers option, then click on Get Started button and select the Enable Remote Connections feature. Once you’ve completed these actions, accept to install the Chrome Desktop Remote Host Installer and after the installation is over, run the installer.
2.Choose PIN
In the next step, you will be asked to select the security PIN for the host computer, that must be numeric and that has at least six digits. After you successfully completed this task the part of the process related to the host computer is finished, although you may want to adjust power saving settings so it doesn’t go into a standby mode if it is inactive for too long.
3.Make Connection
In order to establish the connection between your PC and your Chromebook, both devices must sign into the same Google account. Go to the Google Play Store, only this time from you Chromebook and click on the Launch app option, the app should already be installed on the Chromebook you are using as a consequence of Google accounts keeping in sync. After you launched the app go to My Computers option and choose the Get Started feature. Select the computer you’d like to connect to and insert the PIN. After you entered the PIN, click on the Connect option and you should be able to see the desktop of your computer in the web browser.
4.Optimize Options
Due to disparities between screen resolutions, pictures you will be able to see on your Chromebook may appear to be a little grainy. If you’d like to have a sharper and clearer image go to Options and disable Shrink to Fit feature. Furthermore, users who’d like to use video editing apps must make sure that all content they would like to edit is either on the Googe Drive because the Chrome Desktop Remote doesn’t offer a direct transfer of files as an option.
Method 2: Using Developer Mode and Installing a Virtual Machine
The second method is best suited for Chromebook owners who are already running a Linux OS on their devices. The Developer Mode can provide a powerful Linux desktop on Chrombook, although it is a slightly complicated process that can be time-consuming. Before install a Virtual Machine software on Chromebook, you should check if your Chromebook is ARM or Intel based, because Virtual Machine software can’t run on ARM powered Chromebooks.
- The first step of the process is to install the Linux OS from the Developer Mode on your Chromebook, then switch to the newly installed OS and start the installation of the Virtual Machine software like Virtual Box or Windows Virtual PC.
- The next step is to install the Windows OS inside the Virtual Box or any other Virtual Machine software you decided to use. This will enable you to switch between Chrome OS and Linux OS with a simple keyboard shortcut or use editing software that is compatible with the Windows OS.
- After you’ve successfully installed the Windows OS within the Virtual Machine software you can install video editing software that will allow you to edit videos from your Chromebook. The Virtual Machine software takes a lot of hard-drive space so that may not leave too much space for the video footage you’d like to edit with your Chromebook. Even the latest Chromebooks offer barely enough processing power required to run more demanding editing software, so using the software like the Virtual Box may limit their performance even more.
Chromebook owners who would like to have access to Mac and Windows video editing apps will benefit more if they choose to install the Chromebook Desktop Remote application because it is easier to use and it has performed much better than all other methods of accessing software designed for Mac, Windows or Linux operating systems.
Bonus: We highly recommend you to use our Filmora X following the instructions above, we optimized the app for it.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Generally, for the same price, you will be able to get a better build quality, longger battery life and lighter Chromebook, compared to Mac and PC. However, it is a common knowledge that Chromebooks don’t support Windows or Mac video applications or any other apps that aren’t designed for the Chrome OS. But, if you are looking for a way to edit your videos from a Chromebook do not despair because there is a way to use Windows or Mac software. Instead of being forced to use online editors that often provide just a few basic editing options Chromebook users can access editing software that is compatible with Mac or Windows OS. There is more than just one way to gain access to Mac and Windows programs, although before getting your hopes up, you should first check if the Chromebook model you have allows you to install the necessary software.
These solutions may not be obvious, but using them may enable you to use professional editing software that is available for Mac and Windows operating systems. Let’s see how you can run Filmora, Final Cut Pro, Sony Vegas Pro or any other powerful video editing software from your Chromebook.
You may also want to know:
Part 1: How to Run Windows and Mac OS Video Editing Apps on Chromebook
As we already mentioned there are two different ways to run Mac and Windows OS video editing apps from your Chromebook, although one method is much less complicated than the other. Let’s have a look at the methods that will enable you to gain access to all applications you need to create stunning videos.
Method 1: Accessing with Chromebook Desktop Remote
A simple app that is available at the Google Play Store for free will enable you to access a remote computer and use any programs installed on it from your Chromebook. There are many applications similar to Chrome Desktop Remote, but we chose it because it is simple to use, very effective and completely free.
1.Install Chromebook Desktop Remote
The first step is to install the Chrome Desktop Remote app on both the computers you want to pair with and your Chromebook. After the application is installed, you will be presented with two options in the app’s main screen Remote Assistance and My Computers.
Choose the My Computers option, then click on Get Started button and select the Enable Remote Connections feature. Once you’ve completed these actions, accept to install the Chrome Desktop Remote Host Installer and after the installation is over, run the installer.
2.Choose PIN
In the next step, you will be asked to select the security PIN for the host computer, that must be numeric and that has at least six digits. After you successfully completed this task the part of the process related to the host computer is finished, although you may want to adjust power saving settings so it doesn’t go into a standby mode if it is inactive for too long.
3.Make Connection
In order to establish the connection between your PC and your Chromebook, both devices must sign into the same Google account. Go to the Google Play Store, only this time from you Chromebook and click on the Launch app option, the app should already be installed on the Chromebook you are using as a consequence of Google accounts keeping in sync. After you launched the app go to My Computers option and choose the Get Started feature. Select the computer you’d like to connect to and insert the PIN. After you entered the PIN, click on the Connect option and you should be able to see the desktop of your computer in the web browser.
4.Optimize Options
Due to disparities between screen resolutions, pictures you will be able to see on your Chromebook may appear to be a little grainy. If you’d like to have a sharper and clearer image go to Options and disable Shrink to Fit feature. Furthermore, users who’d like to use video editing apps must make sure that all content they would like to edit is either on the Googe Drive because the Chrome Desktop Remote doesn’t offer a direct transfer of files as an option.
Method 2: Using Developer Mode and Installing a Virtual Machine
The second method is best suited for Chromebook owners who are already running a Linux OS on their devices. The Developer Mode can provide a powerful Linux desktop on Chrombook, although it is a slightly complicated process that can be time-consuming. Before install a Virtual Machine software on Chromebook, you should check if your Chromebook is ARM or Intel based, because Virtual Machine software can’t run on ARM powered Chromebooks.
- The first step of the process is to install the Linux OS from the Developer Mode on your Chromebook, then switch to the newly installed OS and start the installation of the Virtual Machine software like Virtual Box or Windows Virtual PC.
- The next step is to install the Windows OS inside the Virtual Box or any other Virtual Machine software you decided to use. This will enable you to switch between Chrome OS and Linux OS with a simple keyboard shortcut or use editing software that is compatible with the Windows OS.
- After you’ve successfully installed the Windows OS within the Virtual Machine software you can install video editing software that will allow you to edit videos from your Chromebook. The Virtual Machine software takes a lot of hard-drive space so that may not leave too much space for the video footage you’d like to edit with your Chromebook. Even the latest Chromebooks offer barely enough processing power required to run more demanding editing software, so using the software like the Virtual Box may limit their performance even more.
Chromebook owners who would like to have access to Mac and Windows video editing apps will benefit more if they choose to install the Chromebook Desktop Remote application because it is easier to use and it has performed much better than all other methods of accessing software designed for Mac, Windows or Linux operating systems.
Bonus: We highly recommend you to use our Filmora X following the instructions above, we optimized the app for it.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Generally, for the same price, you will be able to get a better build quality, longger battery life and lighter Chromebook, compared to Mac and PC. However, it is a common knowledge that Chromebooks don’t support Windows or Mac video applications or any other apps that aren’t designed for the Chrome OS. But, if you are looking for a way to edit your videos from a Chromebook do not despair because there is a way to use Windows or Mac software. Instead of being forced to use online editors that often provide just a few basic editing options Chromebook users can access editing software that is compatible with Mac or Windows OS. There is more than just one way to gain access to Mac and Windows programs, although before getting your hopes up, you should first check if the Chromebook model you have allows you to install the necessary software.
These solutions may not be obvious, but using them may enable you to use professional editing software that is available for Mac and Windows operating systems. Let’s see how you can run Filmora, Final Cut Pro, Sony Vegas Pro or any other powerful video editing software from your Chromebook.
You may also want to know:
Part 1: How to Run Windows and Mac OS Video Editing Apps on Chromebook
As we already mentioned there are two different ways to run Mac and Windows OS video editing apps from your Chromebook, although one method is much less complicated than the other. Let’s have a look at the methods that will enable you to gain access to all applications you need to create stunning videos.
Method 1: Accessing with Chromebook Desktop Remote
A simple app that is available at the Google Play Store for free will enable you to access a remote computer and use any programs installed on it from your Chromebook. There are many applications similar to Chrome Desktop Remote, but we chose it because it is simple to use, very effective and completely free.
1.Install Chromebook Desktop Remote
The first step is to install the Chrome Desktop Remote app on both the computers you want to pair with and your Chromebook. After the application is installed, you will be presented with two options in the app’s main screen Remote Assistance and My Computers.
Choose the My Computers option, then click on Get Started button and select the Enable Remote Connections feature. Once you’ve completed these actions, accept to install the Chrome Desktop Remote Host Installer and after the installation is over, run the installer.
2.Choose PIN
In the next step, you will be asked to select the security PIN for the host computer, that must be numeric and that has at least six digits. After you successfully completed this task the part of the process related to the host computer is finished, although you may want to adjust power saving settings so it doesn’t go into a standby mode if it is inactive for too long.
3.Make Connection
In order to establish the connection between your PC and your Chromebook, both devices must sign into the same Google account. Go to the Google Play Store, only this time from you Chromebook and click on the Launch app option, the app should already be installed on the Chromebook you are using as a consequence of Google accounts keeping in sync. After you launched the app go to My Computers option and choose the Get Started feature. Select the computer you’d like to connect to and insert the PIN. After you entered the PIN, click on the Connect option and you should be able to see the desktop of your computer in the web browser.
4.Optimize Options
Due to disparities between screen resolutions, pictures you will be able to see on your Chromebook may appear to be a little grainy. If you’d like to have a sharper and clearer image go to Options and disable Shrink to Fit feature. Furthermore, users who’d like to use video editing apps must make sure that all content they would like to edit is either on the Googe Drive because the Chrome Desktop Remote doesn’t offer a direct transfer of files as an option.
Method 2: Using Developer Mode and Installing a Virtual Machine
The second method is best suited for Chromebook owners who are already running a Linux OS on their devices. The Developer Mode can provide a powerful Linux desktop on Chrombook, although it is a slightly complicated process that can be time-consuming. Before install a Virtual Machine software on Chromebook, you should check if your Chromebook is ARM or Intel based, because Virtual Machine software can’t run on ARM powered Chromebooks.
- The first step of the process is to install the Linux OS from the Developer Mode on your Chromebook, then switch to the newly installed OS and start the installation of the Virtual Machine software like Virtual Box or Windows Virtual PC.
- The next step is to install the Windows OS inside the Virtual Box or any other Virtual Machine software you decided to use. This will enable you to switch between Chrome OS and Linux OS with a simple keyboard shortcut or use editing software that is compatible with the Windows OS.
- After you’ve successfully installed the Windows OS within the Virtual Machine software you can install video editing software that will allow you to edit videos from your Chromebook. The Virtual Machine software takes a lot of hard-drive space so that may not leave too much space for the video footage you’d like to edit with your Chromebook. Even the latest Chromebooks offer barely enough processing power required to run more demanding editing software, so using the software like the Virtual Box may limit their performance even more.
Chromebook owners who would like to have access to Mac and Windows video editing apps will benefit more if they choose to install the Chromebook Desktop Remote application because it is easier to use and it has performed much better than all other methods of accessing software designed for Mac, Windows or Linux operating systems.
Bonus: We highly recommend you to use our Filmora X following the instructions above, we optimized the app for it.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Generally, for the same price, you will be able to get a better build quality, longger battery life and lighter Chromebook, compared to Mac and PC. However, it is a common knowledge that Chromebooks don’t support Windows or Mac video applications or any other apps that aren’t designed for the Chrome OS. But, if you are looking for a way to edit your videos from a Chromebook do not despair because there is a way to use Windows or Mac software. Instead of being forced to use online editors that often provide just a few basic editing options Chromebook users can access editing software that is compatible with Mac or Windows OS. There is more than just one way to gain access to Mac and Windows programs, although before getting your hopes up, you should first check if the Chromebook model you have allows you to install the necessary software.
These solutions may not be obvious, but using them may enable you to use professional editing software that is available for Mac and Windows operating systems. Let’s see how you can run Filmora, Final Cut Pro, Sony Vegas Pro or any other powerful video editing software from your Chromebook.
You may also want to know:
Part 1: How to Run Windows and Mac OS Video Editing Apps on Chromebook
As we already mentioned there are two different ways to run Mac and Windows OS video editing apps from your Chromebook, although one method is much less complicated than the other. Let’s have a look at the methods that will enable you to gain access to all applications you need to create stunning videos.
Method 1: Accessing with Chromebook Desktop Remote
A simple app that is available at the Google Play Store for free will enable you to access a remote computer and use any programs installed on it from your Chromebook. There are many applications similar to Chrome Desktop Remote, but we chose it because it is simple to use, very effective and completely free.
1.Install Chromebook Desktop Remote
The first step is to install the Chrome Desktop Remote app on both the computers you want to pair with and your Chromebook. After the application is installed, you will be presented with two options in the app’s main screen Remote Assistance and My Computers.
Choose the My Computers option, then click on Get Started button and select the Enable Remote Connections feature. Once you’ve completed these actions, accept to install the Chrome Desktop Remote Host Installer and after the installation is over, run the installer.
2.Choose PIN
In the next step, you will be asked to select the security PIN for the host computer, that must be numeric and that has at least six digits. After you successfully completed this task the part of the process related to the host computer is finished, although you may want to adjust power saving settings so it doesn’t go into a standby mode if it is inactive for too long.
3.Make Connection
In order to establish the connection between your PC and your Chromebook, both devices must sign into the same Google account. Go to the Google Play Store, only this time from you Chromebook and click on the Launch app option, the app should already be installed on the Chromebook you are using as a consequence of Google accounts keeping in sync. After you launched the app go to My Computers option and choose the Get Started feature. Select the computer you’d like to connect to and insert the PIN. After you entered the PIN, click on the Connect option and you should be able to see the desktop of your computer in the web browser.
4.Optimize Options
Due to disparities between screen resolutions, pictures you will be able to see on your Chromebook may appear to be a little grainy. If you’d like to have a sharper and clearer image go to Options and disable Shrink to Fit feature. Furthermore, users who’d like to use video editing apps must make sure that all content they would like to edit is either on the Googe Drive because the Chrome Desktop Remote doesn’t offer a direct transfer of files as an option.
Method 2: Using Developer Mode and Installing a Virtual Machine
The second method is best suited for Chromebook owners who are already running a Linux OS on their devices. The Developer Mode can provide a powerful Linux desktop on Chrombook, although it is a slightly complicated process that can be time-consuming. Before install a Virtual Machine software on Chromebook, you should check if your Chromebook is ARM or Intel based, because Virtual Machine software can’t run on ARM powered Chromebooks.
- The first step of the process is to install the Linux OS from the Developer Mode on your Chromebook, then switch to the newly installed OS and start the installation of the Virtual Machine software like Virtual Box or Windows Virtual PC.
- The next step is to install the Windows OS inside the Virtual Box or any other Virtual Machine software you decided to use. This will enable you to switch between Chrome OS and Linux OS with a simple keyboard shortcut or use editing software that is compatible with the Windows OS.
- After you’ve successfully installed the Windows OS within the Virtual Machine software you can install video editing software that will allow you to edit videos from your Chromebook. The Virtual Machine software takes a lot of hard-drive space so that may not leave too much space for the video footage you’d like to edit with your Chromebook. Even the latest Chromebooks offer barely enough processing power required to run more demanding editing software, so using the software like the Virtual Box may limit their performance even more.
Chromebook owners who would like to have access to Mac and Windows video editing apps will benefit more if they choose to install the Chromebook Desktop Remote application because it is easier to use and it has performed much better than all other methods of accessing software designed for Mac, Windows or Linux operating systems.
Bonus: We highly recommend you to use our Filmora X following the instructions above, we optimized the app for it.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Also read:
- 2024 Approved 5 Leading Photo Video Makers to Elevate Your Slideshow Game
- Free DVD Player Software for Windows 10 Our Top 10 Recommendations for 2024
- In 2024, Edit Videos for Free Top 14 Watermark-Free Software
- Discover the Power of Jaycut A Comprehensive Guide to Free Online Video Editing for 2024
- In 2024, From Forward to Backward A Comprehensive Guide to Reversing TikTok Videos
- Get Retro with FCP Simple VHS Effect Techniques
- Free MPEG Video Splitter Roundup Top Picks
- Updated Best Free AVI Video Combining Tools No Watermarks or Trials
- Updated Cutting Through the Noise Final Cut Pro vs LumaFusion Comparison
- Video Editing Tools with Built-In Music Libraries 2024 Edition
- In 2024, What Is the Best Program to Use to Make a Highlight Video? In This Article, I Will Share some of the Best Highlight Video Makers for Both Desktop Computers and Mobile Phones
- Free MOV Video Editor Roundup Top 10 Options
- 2024 Approved Best Top Android Video Editing Apps for Free and Paid Users
- Updated Create Stunning Animations Top Free and Paid 3D Software Recommendations
- Fast Track Your Videos Top 10 Free Speed Changer Apps for iPhone and Android for 2024
- 2024 Approved Fast Forward to Fun Top 10 Free Video Speed Controller Apps
- Creative Time Manipulation in FCPX Freeze Frames and Slow Motion
- Top Free Video Editing Software for Newbies Desktop/Online/Mobile for 2024
- The Ultimate Guide to Aspect Ratio Adjustment in Final Cut Pro
- Make a Movie on Your Mac A Comprehensive Tutorial
- What Should Consider when Converting MP3 Into MP4 for 2024
- 2024 Approved Splice Video Editor A Detailed Analysis of Its Capabilities
- In 2024, Best 3D Animation Apps for Android and iPhone (Free Download)
- In 2024, Final Cut Pro for Free Your 90-Day Trial Awaits
- Easter Eggstravaganza Get Your Wondershare Filmora Promo Code Now
- Updated Combine MPEG Videos for Free Top Rated Tools
- Flip Your TikTok Videos A Comprehensive Guide to Reversing Clips
- Convert Facebook Videos to MP3 Top Online Tools
- Updated Chromebooks Finest Top 10 Free Video Editors You Need to Try
- Essential 3D Video Editing Tools Every Creator Should Use
- Updated Free Video Trimming Software No Watermarks Attached
- Animated Excellence The Best Stop Motion Software for Mac and PC
- Cartoon Video Creation Made Easy Top 10 Online and PC Options
- 2024 Approved Optimize Your Views YouTube Thumbnail Dimensions and Strategies
- From Clash to Cohesion How to Match Colors in Your Video Footage Using Final Cut Pro
- Edit Videos Like a Pro 64-Bit Software for Windows 8 and Up for 2024
- Best Video Makers with Music for Android and iPhone for 2024
- New Find the Perfect Audio Converter Top 12 Options Reviewed
- New Bring Your Vision to Life Best Animation Software for Mac and PC Professionals
- If You Want to Improve Your Animation Skills or Look for Professional Animation Software, This Article Will Recommend 8 Best Tools on Mac and Windows
- New Free M4A Editing Solutions Top 5 Software
- 10 iMovie Alternatives for Android Expert Recommendations for 2024
- 2024 Approved Brighten Up The Best Video Editing Apps This Year
- In 2024, How and Where to Find a Shiny Stone Pokémon For Apple iPhone 11? | Dr.fone
- How to Bypass Android Lock Screen Using Emergency Call On Vivo Y100i Power 5G?
- How To Transfer Data From Apple iPhone 12 Pro To Other iPhone 15 Pro devices? | Dr.fone
- Everything You Need to Know about Lock Screen Settings on your Vivo X100
- 5 Hassle-Free Solutions to Fake Location on Find My Friends Of Nubia Z50 Ultra | Dr.fone
- How to Transfer Data from Realme Narzo 60x 5G to Any iOS Devices | Dr.fone
- In 2024, About Samsung Galaxy XCover 6 Pro Tactical Edition FRP Bypass
- Updated What Is AI Marketing? | Wondershare Virbo Glossary
- How to Reset Vivo Y27 4G without Losing Data | Dr.fone
- 5 Best Route Generator Apps You Should Try On Tecno Camon 20 Pro 5G | Dr.fone
- How to Change Spotify Location After Moving to Another Country On Realme V30 | Dr.fone
- Ways to stop parent tracking your Xiaomi Civi 3 Disney 100th Anniversary Edition | Dr.fone
- In 2024, Does Airplane Mode Turn off GPS Location On Infinix Smart 8 Plus? | Dr.fone
- In 2024, A Perfect Guide To Remove or Disable Google Smart Lock On Nubia
- How to restore wiped messages on Infinix Zero 5G 2023 Turbo
- A Perfect Guide To Remove or Disable Google Smart Lock On Samsung Galaxy F34 5G
- The Updated Method to Bypass Honor 80 Pro Straight Screen Edition FRP
- 15 Best Strongest Pokémon To Use in Pokémon GO PvP Leagues For Tecno Spark 20 Pro | Dr.fone
- In 2024, Everything You Need To Know About Unlocked Apple iPhone 11 Pro
- In 2024, A Step-by-Step Guide on Using ADB and Fastboot to Remove FRP Lock on your Gionee F3 Pro
- Tips And Tricks To Tell if Your iPhone 6s Is Unlocked
- In 2024, Best Anti Tracker Software For Vivo V30 Lite 5G | Dr.fone
- How to Upgrade Apple iPhone 6 Plus without Data Loss? | Dr.fone
- Title: Updated Audio Editing in FCP Tips, Tricks, and Best Practices
- Author: Giselle
- Created at : 2024-05-19 07:45:58
- Updated at : 2024-05-20 07:45:58
- Link: https://ai-vdieo-software.techidaily.com/updated-audio-editing-in-fcp-tips-tricks-and-best-practices/
- License: This work is licensed under CC BY-NC-SA 4.0.