Transform Your Videos A Step-by-Step Guide to Resizing for Social Media

Giselle Lv12

2024-05-19 07:45:17 2024-05-19 07:45:17 Created 2024-05-20 07:45:17 2024-05-20 07:45:17 Updated

ai
>
video

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

With more and more content being designed for phones, vertical videos are widely used now.

If you too have recorded videos for posting on your social media sites, resize them in vertical video ratio and to get the right size, take help of a video ratio calculator.

Part 1 Benefits of Square and Vertical Videos

● What is Square Video & Vertical Video?

A Square Video is the one that has the same width and height while a vertical video is taller than it is wide. A vertical video or a square video is presented in the form of a landscape. A square video has an aspect ratio of 1:1 while a vertical video has an aspect ratio of 9:16.So, in a vertical video, the horizontal video size is less than its vertical size.

● Why Vertical Video is Dominating

It would not be wrong to say that the world has taken a mobile route and with this, the dominance of vertical videos can be seen. As per the studies it has been found that around 75% of the video playback across the globe are from mobile phones and around 94% of the time, the phones are held vertically. These figures completely state the need for the hour-vertical videos.

With users holding their mobile phones vertically the majority of the time, the dominance of the vertical videos is no surprise.

● Benefits of Square and Vertical Videos

There are several benefits of having square and vertical videos. These videos are specifically

designed for mobile phones and thus they can be easily posted on multiple social media sites without any need for change or editing. Other benefits of using vertical videos are their ease of recording through a mobile phone. Vertical videos are beneficial even for the advertisers and promoters as they help them reach more audiences and prospective customers through social media sites and other sites.

Part 2 How Vertical Videos Are Displayed

Vertical videos are majorly displayed on mobile devices as smartphones are used vertically most of the time. The width of these videos is less as compared to their height and this makes them appear fit on the smartphone’s screen. Moreover, using the screen aspect ratio calculator, you can further decide upon the aspect ratio depending on the size of the device screen on which video has to be played.

Listed below are the tips for resizing the social media vertical video ratio.

● Learn about the Aspect Ratios

A vertical video is taller than it is wide. Thus, any video that is taller than the 1:1 aspect ratio will be termed a vertical video. The commonly used aspect ratio is 9:16 that uses the complete vertical screen. So, to capture a vertical video, use the camera in portrait mode or edit it as per the vertical aspect ratio. There are also TV aspect ratio calculator tools that can be used for the task.

● Screen splitting

Multiple clips that are horizontal can be placed at the top of each other for a vertical frame as it is tall. The stacking can be done for the related clips or to make them appear as one. Place the clips creatively using patterns or lines.

● Filling the vertical space

If needed, you can creatively fill the vertical space when the shot is not a close one. One of the ideas is by raising the camera of your phone high and then moving it down that will give a deep frame. You can also fill up the vertical space below.

● Side-to-side fast movements must be avoided

Since the width area in the vertical videos is less, it is also better to avoid the fast side-to-side movement as it will create a shaky and blurry effect.

● Make use of text and graphics

To complement videos, using text and graphics is a good option. Use the vertical space smartly and include text, stickers, graphics, and other content for enhancing the video and its meaning.

● Grab attention

It is important for the videos on the social media sites to instantly catch the attention of the viewers, else they will move on to the next one. So, ensure that your vertical videos are eye-catchy and interesting with bright colors, looping animations, GIFs, and other content that is likely to hook up the viewers.

● Rule of Thirds

As per the photography rule of thirds, the main subject is not to be placed at the center and instead it the entire frame is divided into thirds using imaginary horizontal and vertical lines. The subject should be placed on these lines or where the lines meet. Use the guide grid on your phone’s camera to use this rule.

● Using a professional video editing software

If you have a video that is already recorded, you can enhance its looks and appearance using good video editing software and one such recommended tool is Wondershare Filmora Video Editor . The software is compatible with Windows and Mac and allows you to create stunning videos in just a few clicks that can be posted on several social media sites.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Using this versatile software you can add animations, motion tracking, zooming function, masking, text, and titles. Features like auto-correction, control settings, color wheels, noise reduction, audio sync, audio compression, and others are also supported.

Key Takeaways from This Episode

● With the majority of the video content being viewed on mobile phones, vertical videos have dominated the market.

● Vertical videos can be easily posted on several social media sites and other platforms without any tweaking from your phone.

● Several tips will help you to create a good vertical video for social media and using professional software like Wondershare Filmora is one of them.

Try It Free Try It Free

With more and more content being designed for phones, vertical videos are widely used now.

If you too have recorded videos for posting on your social media sites, resize them in vertical video ratio and to get the right size, take help of a video ratio calculator.

Part 1 Benefits of Square and Vertical Videos

● What is Square Video & Vertical Video?

● Why Vertical Video is Dominating

With users holding their mobile phones vertically the majority of the time, the dominance of the vertical videos is no surprise.

● Benefits of Square and Vertical Videos

There are several benefits of having square and vertical videos. These videos are specifically

Part 2 How Vertical Videos Are Displayed

Listed below are the tips for resizing the social media vertical video ratio.

● Learn about the Aspect Ratios

● Screen splitting

● Filling the vertical space

● Side-to-side fast movements must be avoided

Since the width area in the vertical videos is less, it is also better to avoid the fast side-to-side movement as it will create a shaky and blurry effect.

● Make use of text and graphics

To complement videos, using text and graphics is a good option. Use the vertical space smartly and include text, stickers, graphics, and other content for enhancing the video and its meaning.

● Grab attention

● Rule of Thirds

● Using a professional video editing software

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● With the majority of the video content being viewed on mobile phones, vertical videos have dominated the market.

● Vertical videos can be easily posted on several social media sites and other platforms without any tweaking from your phone.

● Several tips will help you to create a good vertical video for social media and using professional software like Wondershare Filmora is one of them.

Try It Free Try It Free

With more and more content being designed for phones, vertical videos are widely used now.

If you too have recorded videos for posting on your social media sites, resize them in vertical video ratio and to get the right size, take help of a video ratio calculator.

Part 1 Benefits of Square and Vertical Videos

● What is Square Video & Vertical Video?

● Why Vertical Video is Dominating

With users holding their mobile phones vertically the majority of the time, the dominance of the vertical videos is no surprise.

● Benefits of Square and Vertical Videos

There are several benefits of having square and vertical videos. These videos are specifically

Part 2 How Vertical Videos Are Displayed

Listed below are the tips for resizing the social media vertical video ratio.

● Learn about the Aspect Ratios

● Screen splitting

● Filling the vertical space

● Side-to-side fast movements must be avoided

Since the width area in the vertical videos is less, it is also better to avoid the fast side-to-side movement as it will create a shaky and blurry effect.

● Make use of text and graphics

To complement videos, using text and graphics is a good option. Use the vertical space smartly and include text, stickers, graphics, and other content for enhancing the video and its meaning.

● Grab attention

● Rule of Thirds

● Using a professional video editing software

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● With the majority of the video content being viewed on mobile phones, vertical videos have dominated the market.

● Vertical videos can be easily posted on several social media sites and other platforms without any tweaking from your phone.

● Several tips will help you to create a good vertical video for social media and using professional software like Wondershare Filmora is one of them.

Try It Free Try It Free

With more and more content being designed for phones, vertical videos are widely used now.

If you too have recorded videos for posting on your social media sites, resize them in vertical video ratio and to get the right size, take help of a video ratio calculator.

Part 1 Benefits of Square and Vertical Videos

● What is Square Video & Vertical Video?

● Why Vertical Video is Dominating

With users holding their mobile phones vertically the majority of the time, the dominance of the vertical videos is no surprise.

● Benefits of Square and Vertical Videos

There are several benefits of having square and vertical videos. These videos are specifically

Part 2 How Vertical Videos Are Displayed

Listed below are the tips for resizing the social media vertical video ratio.

● Learn about the Aspect Ratios

● Screen splitting

● Filling the vertical space

● Side-to-side fast movements must be avoided

Since the width area in the vertical videos is less, it is also better to avoid the fast side-to-side movement as it will create a shaky and blurry effect.

● Make use of text and graphics

To complement videos, using text and graphics is a good option. Use the vertical space smartly and include text, stickers, graphics, and other content for enhancing the video and its meaning.

● Grab attention

● Rule of Thirds

● Using a professional video editing software

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● With the majority of the video content being viewed on mobile phones, vertical videos have dominated the market.

● Vertical videos can be easily posted on several social media sites and other platforms without any tweaking from your phone.

● Several tips will help you to create a good vertical video for social media and using professional software like Wondershare Filmora is one of them.

From Bland to Grand: Enhancing Lower Thirds in Final Cut Pro X

What Makes the Best Lower Thirds in Final Cut Pro X?

Liza Brown

Oct 26, 2023• Proven solutions

The videos drop facts to audiences and educate the viewers. The video makers strive to offer a complete overview of the topic within a short duration. Graphics, elements, modules occupy the screen and excites the viewers. The advent of video editing innovations shifted the perspectives.

Here comes an enlightening discussion about the lower third modules in your videos. The tips and tricks associated with the making of this lower third element are available in the below content. Surf them carefully and learn the fabulous lower third templates to customize your videos to the next level.

Part 1: What is the lower third?

Part 2: What factors contribute to a good lower third?

Part 3: How to make a lower third quickly in final cut pro X?[3-step-guide]

Part 4: Where to find great lower thirds templates for final cut pro X?

Part1: What is the lower third?

Are you aware of lower third elements? If you are a newbie video designer, then this article ignites you with reliable facts about it. The lower third module is a graphical element that takes the lower position of a video.

It carries texts to educate the viewers related to the discussed topic in the video. It adds information to the existing content playing in the background. On a clear note, had you observed the news boards displayed at the bottom of the news channel? Yes, of course, most of you must be aware of this element flashing the current news.

You can also observe this lower third module during an interview session on your television. It displays the name of the interviewer and extra data about the session.

On a short note, you can define the lower third module as a piece of a graphical element that hangs at the bottom of the screen displaying related data in pace with the existing video content. You can create the lower third module using an incredible tool for your videos in no time. Identify the factors to work on to refine the lower third module appearance and performances.

Part2: What factors contribute to a good lower third?

While designing the lower third element for your video, you must keep an eye on few factors. Work on the below attributes to build a good lower third element. Always remember to keep it simple to obtain the desired outcomes.

The harmony of hues

The color combinations of your lower third element play a vital factor. Choose the right mix of shades to attract the viewers. Based on the background, use a complementary color to fill your lower third module for a persuasive display. Ensure the combination of hues must not distract the viewers at any cost.

Try different color schemes with Green, Magenta, Orange, and Blue to create a mesmerizing display of the lower third element. You can also use a color picker tool to choose the right combination of colors that match perfectly with the background and typography.

Motion effect

Thrill your audience by inserting movements with the lower third elements. When you add some motion effect to this module, it adds flavors to your video. Work on this feature in-depth and observe whether the lower third’s motion effect excites the audience. Customize the animation time, style, and the way it flashes on the screen.

Make the movements simple and do not add too many moves which distract the viewers. Decide how long the animation should play and align the texts and other related elements according to obtain a perfect look. With the perfect text movements, you can draw the attention of the viewers in no time.

Fonts

The next crucial factor associated with the lower third element is fonts. Font size, the style creates an impact on the overall design of a lower third module.

If you concentrate on this attribute, you will surely end up with a professional design. Choose the font style and sine according to the background content. Do not overshadow the lower third element with the playing content, instead try to add value to it.

Right timing of showing up

Now, you must sense the time for the module to turn up on the video. The timing factor contributes a lot to the perfect display of the lower third element.

Set the right time for the element to enter the screen. Decide the enter and exit timing attribute for this element to reach the audience in a better way.

Logos and positions

Position the element at the perfect place on the screen to ensure its visibility. You can also insert your logos along with the texts to enhance your brand.

Proper alignment and the best coordinates on the screen make the lower third module shine better in your video. Proper placement of this element decides the impact on it.

Part3: How to make a lower third quickly in final cut pro X?

The Final Cut Pro X is a fabulous program to edit your videos professionally. Insert the desired elements and customize them quickly. To work on this platform, you do not require any special skills.

Click, drag, and drop appropriately to include the right elements at the perfect positions on the video. There is ample personalization options built-in with the Final Cut Pro X. It is high time to discover them for optimal utilization.

Features of Final Cut Pro X to design lower third module element

It has a built-in title element to add the desired texts in the video
Quick customization option to type in the relevant message on the screen.
This app consist of a user-friendly interface and the controls are explicit for easy reach.
Personalize the lower third element further using the ‘Generator’ option
You can include animations for the lower third module to persuade the viewers.

In this section, you will learn to make a lower third element using a Final Cut Pro X tool. It is high to check out the steps in detail.

1Step 1: Download the tool

You can download the app and install them in your system. Launch the tool by double-tapping the tool icon.

2Step 2: Add the Title

In the home screen, import the video that requires the edits and then tap the ‘Titles’ tab at the left top of the screen. Click the ‘Build-in/Build-out’ option to custom the Title element. According to your needs, you can repeat it to insert the desired titles on the video screen.

3Step 3: Customize the Title

Now, you can edit the texts in the inserted titles and add animation to the element using the attributes under the ‘Generator’ tab. Modify the title’s textures, background, and positions using the relevant options displayed. Choose accordingly to personalize the title element based on your requirement.

Use the above instructions, insert the lower third element in your video effortlessly. Simple click and drag actions are sufficient to carry out the desired effects on the element.

For those who still need more guides about making lower thirds, this Filmora tutorial may help a lot.

Part 4: Where to find great lower thirds templates for final cut pro X?

You can find the best collections of lower third templates in the online space. Evanto Elements offers an incredible design structure for the lower third module to add value to your videos. They are unique and jaw-dropping. You can opt for this template, instead of creating from the scratch.

According to your needs, you can select the template, customize it, and insert them on your videos flawlessly. Evanto offers the lower third templates based on the video content. It has organized the templates based on the end-use. Check out few suggestions on the built-in templates for the lower third.

YouTube Lower Thirds

If you have a YouTube channel, then make use of this collection to add a lower third module for your video. Increase the followers by adding the perfect texts at the right time on the screen. Easy to use design and displays attractive appearances.

Pop Lower Thirds template

Colorful and yet attractive design from the Evanto elements. This design has a fresh and creative structure to convince the viewer’s needs. It has a high-end resolution with a duration control option.

Minimalistic collection

In this template group, you can find the design seems to be simple and minimal. It offers a lighter touch to your videos. The text overlays do not distract the viewers. Everything looks the same but still, you can feel the difference in it when you customize it according to your needs.

Conclusion

Thus, this article had given you enlightening discussion about the lower third elements. Insert this module optimally in your videos and obtain the desired outcomes. Enhance the design of the lower third element using the Final Cut Pro X app and feel the difference in your video.

Display the texts promptly to enlighten the audience. Connect the texts to the target audience without distracting them. Work on this challenging element using a professional app like the Final Cut Pro X program. Stay tuned with this article to discover the new horizons of video editing.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Part 1: What is the lower third?

Part 2: What factors contribute to a good lower third?

Part 3: How to make a lower third quickly in final cut pro X?[3-step-guide]

Part 4: Where to find great lower thirds templates for final cut pro X?

Part1: What is the lower third?

You can also observe this lower third module during an interview session on your television. It displays the name of the interviewer and extra data about the session.

Part2: What factors contribute to a good lower third?

The harmony of hues

Motion effect

Fonts

The next crucial factor associated with the lower third element is fonts. Font size, the style creates an impact on the overall design of a lower third module.

Right timing of showing up

Now, you must sense the time for the module to turn up on the video. The timing factor contributes a lot to the perfect display of the lower third element.

Set the right time for the element to enter the screen. Decide the enter and exit timing attribute for this element to reach the audience in a better way.

Logos and positions

Position the element at the perfect place on the screen to ensure its visibility. You can also insert your logos along with the texts to enhance your brand.

Proper alignment and the best coordinates on the screen make the lower third module shine better in your video. Proper placement of this element decides the impact on it.

Part3: How to make a lower third quickly in final cut pro X?

The Final Cut Pro X is a fabulous program to edit your videos professionally. Insert the desired elements and customize them quickly. To work on this platform, you do not require any special skills.

Features of Final Cut Pro X to design lower third module element

It has a built-in title element to add the desired texts in the video
Quick customization option to type in the relevant message on the screen.
This app consist of a user-friendly interface and the controls are explicit for easy reach.
Personalize the lower third element further using the ‘Generator’ option
You can include animations for the lower third module to persuade the viewers.

In this section, you will learn to make a lower third element using a Final Cut Pro X tool. It is high to check out the steps in detail.

1Step 1: Download the tool

You can download the app and install them in your system. Launch the tool by double-tapping the tool icon.

2Step 2: Add the Title

3Step 3: Customize the Title

Use the above instructions, insert the lower third element in your video effortlessly. Simple click and drag actions are sufficient to carry out the desired effects on the element.

For those who still need more guides about making lower thirds, this Filmora tutorial may help a lot.

Part 4: Where to find great lower thirds templates for final cut pro X?

YouTube Lower Thirds

Pop Lower Thirds template

Minimalistic collection

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Part 1: What is the lower third?

Part 2: What factors contribute to a good lower third?

Part 3: How to make a lower third quickly in final cut pro X?[3-step-guide]

Part 4: Where to find great lower thirds templates for final cut pro X?

Part1: What is the lower third?

You can also observe this lower third module during an interview session on your television. It displays the name of the interviewer and extra data about the session.

Part2: What factors contribute to a good lower third?

The harmony of hues

Motion effect

Fonts

The next crucial factor associated with the lower third element is fonts. Font size, the style creates an impact on the overall design of a lower third module.

Right timing of showing up

Now, you must sense the time for the module to turn up on the video. The timing factor contributes a lot to the perfect display of the lower third element.

Set the right time for the element to enter the screen. Decide the enter and exit timing attribute for this element to reach the audience in a better way.

Logos and positions

Position the element at the perfect place on the screen to ensure its visibility. You can also insert your logos along with the texts to enhance your brand.

Proper alignment and the best coordinates on the screen make the lower third module shine better in your video. Proper placement of this element decides the impact on it.

Part3: How to make a lower third quickly in final cut pro X?

The Final Cut Pro X is a fabulous program to edit your videos professionally. Insert the desired elements and customize them quickly. To work on this platform, you do not require any special skills.

Features of Final Cut Pro X to design lower third module element

It has a built-in title element to add the desired texts in the video
Quick customization option to type in the relevant message on the screen.
This app consist of a user-friendly interface and the controls are explicit for easy reach.
Personalize the lower third element further using the ‘Generator’ option
You can include animations for the lower third module to persuade the viewers.

In this section, you will learn to make a lower third element using a Final Cut Pro X tool. It is high to check out the steps in detail.

1Step 1: Download the tool

You can download the app and install them in your system. Launch the tool by double-tapping the tool icon.

2Step 2: Add the Title

3Step 3: Customize the Title

Use the above instructions, insert the lower third element in your video effortlessly. Simple click and drag actions are sufficient to carry out the desired effects on the element.

For those who still need more guides about making lower thirds, this Filmora tutorial may help a lot.

Part 4: Where to find great lower thirds templates for final cut pro X?

YouTube Lower Thirds

Pop Lower Thirds template

Minimalistic collection

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Part 1: What is the lower third?

Part 2: What factors contribute to a good lower third?

Part 3: How to make a lower third quickly in final cut pro X?[3-step-guide]

Part 4: Where to find great lower thirds templates for final cut pro X?

Part1: What is the lower third?

You can also observe this lower third module during an interview session on your television. It displays the name of the interviewer and extra data about the session.

Part2: What factors contribute to a good lower third?

The harmony of hues

Motion effect

Fonts

The next crucial factor associated with the lower third element is fonts. Font size, the style creates an impact on the overall design of a lower third module.

Right timing of showing up

Now, you must sense the time for the module to turn up on the video. The timing factor contributes a lot to the perfect display of the lower third element.

Set the right time for the element to enter the screen. Decide the enter and exit timing attribute for this element to reach the audience in a better way.

Logos and positions

Position the element at the perfect place on the screen to ensure its visibility. You can also insert your logos along with the texts to enhance your brand.

Proper alignment and the best coordinates on the screen make the lower third module shine better in your video. Proper placement of this element decides the impact on it.

Part3: How to make a lower third quickly in final cut pro X?

The Final Cut Pro X is a fabulous program to edit your videos professionally. Insert the desired elements and customize them quickly. To work on this platform, you do not require any special skills.

Features of Final Cut Pro X to design lower third module element

It has a built-in title element to add the desired texts in the video
Quick customization option to type in the relevant message on the screen.
This app consist of a user-friendly interface and the controls are explicit for easy reach.
Personalize the lower third element further using the ‘Generator’ option
You can include animations for the lower third module to persuade the viewers.

In this section, you will learn to make a lower third element using a Final Cut Pro X tool. It is high to check out the steps in detail.

1Step 1: Download the tool

You can download the app and install them in your system. Launch the tool by double-tapping the tool icon.

2Step 2: Add the Title

3Step 3: Customize the Title

Use the above instructions, insert the lower third element in your video effortlessly. Simple click and drag actions are sufficient to carry out the desired effects on the element.

For those who still need more guides about making lower thirds, this Filmora tutorial may help a lot.

Part 4: Where to find great lower thirds templates for final cut pro X?

YouTube Lower Thirds

Pop Lower Thirds template

Minimalistic collection

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Ken Burns Effect Tutorial: From Basics to Pro

How to Make Ken Burns Effect in Final Cut Pro?

Liza Brown

Mar 27, 2024• Proven solutions

Ken Burns Effect is an advanced feature of Final Cut Pro that allows users to add creative animations to their videos and images within minutes. You just need to select your picture, add movements to the clip, and choose the start and the end position to produce high-resolution stills. Besides, you can do a tilt, zoom in, a pan, or a combination of these three moves on a single image. This way, you can use the Ken Burns Effect to highlight the stimulating features in your photograph and save your memories in the form of innovative and high-definition animated clips.

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Final Cut Pro is user-friendly software and makes it easy for you to create a Ken Burns Effect without having advanced skills and expertise. So, are you interested in knowing the best part? Given below are a few simple steps to create Ken Burns Effect and make your pictures and videos look adorable.

Step 1: Add Images to the Timeline

First of all, you should specify a name for your project and add photos to the timeline in Final Cut Pro. For this purpose, select multiple photos and press E. A clip will be added to the timeline as shown in figure 1.

Step 2: Check Your Settings

As you can see, our timeline has no other video clip. Hence, Final Cut Pro will not recognize the clip until you adjust the video properties such as format, resolution, and rate, etc. For this purpose, click OK to use your preferred settings and press Shift + Z to fit the picture to your timeline window. Once you’re done it’s time to apply the Ken Burns Effect.

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

In the Ken Burns display, you can see the controls for adjusting the panning and zooms effects by changing the size and position of two-colored rectangles overlaying on the clip. To customize the Ken Burns effect:

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

You’re not done yet because you need to hold your picture at the end of the animation. For this purpose, you should create a freezing frame at the end of the clip to make Ken Burns do this. Here’s the deal:

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

The users can also adjust the speed of the animation and the duration of the freeze-frame by trimming your clip. For this purpose, trim the length as per your requirement and it will optimize the speed as shown in figure 6.

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

After you have optimized the speed of the Ken Burns Effect by trimming the clip’s length and have widened the shot to include everyone, it’s time to preview the changes you have made. Given below are simple steps:

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Although you can apply a single Ken Burns movement to your image, you can still give the impression of multiple movements being used. This means the Ken Burns Effect can be added to multiple camera movements by duplicating the photo and building numerous movements in sequence.

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

The Ken Burns Effect is a feature in Final Cut Pro to create a pan and zoom effect by using your predefined start and end positions. Basically, it is a crop effect with one crop at the start of the clip while the other at the end. Ken Burns Effect can be further customized by adjusting the smoothness of the animation. While creating a Ken Burns Effect, the motion applied to the video clips gets automatically smoothed to accelerate and decelerate the movement slowly at the start and the end of the animation.

Why the Effect is named after Ken Burns?

Now, as you have learned the purpose of the Ken Burns Effect, you must be curious about its name. It is named after American documentarian Ken Burns, who is known for his instantly recognizable and highly influential visual aesthetic. Surprisingly, Ken Burns did not invent this Ken Burns Effect; rather, it has existed for decades. You might be wondering why the technique was then named after Ken Burns. This was due to the persistent and adroit use of this technique that it is now known as the Ken Burns Effect.

What are the Applications of Ken Burns Effect?

Primarily, the Ken Burns Effect is used due to the unavailability of a film or video. The technique gives action to still photographs to glorify the subjects of interest like couples in wedding photography. It gets better and better as you apply simulated parallax with Ken Burns Effect to make your 2D images appear as 3D plus advanced zooming visuals. You can also use the Ken Burns effect to make a video of your graduation ceremony pictures or memorable moments of reunion. Ken Burns Effect is also used in documentaries by professional filmmakers and editors.

Conclusion

Adding animated effects to your pictures and videos makes them look gorgeous. This is crazy, isn’t it, when you impress your peers with your editing skills. So, what’s the bottom line of this whole discussion? Try adding the Ken Burns Effect with Final Cut Pro to create a pan and zoom effect on your pictures and clips get the output in your desired format.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

This article introduces the readers to Final Cut Pro and explains how to add the Ken Burns Effect in 8 simple steps.

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?[detaied steps]
Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?
Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

Part 1: How to Make a Ken Burns Effect in Final Cut Pro?

Step 1: Add Images to the Timeline

Step 2: Check Your Settings

Step 3: Add the Ken Burns Effect

The Ken Burns Effect is used to focus on specific parts of an image and bring motionless content in to provoke emotional reactions. Follow these steps to add the Ken Burns Effect:

Select the clip or picture;
See the lower left of the viewer;
Go to the Viewer window using the drop-down menu;
Tap on the pop-up menu located in the bottom left-hand corner;
Choose the Crop option from the menu or press Shift + C;
Press the Ken Burns button in the Crop onscreen controls to add the effect; and
Finally, notice the start frame and the end frame controls.

Step 4: Customize Your Effect

Adjust the green rectangle’s size and position to set the start position;
Adjust the red rectangle’s size and position to set the end position;
The arrow depicts the direction of camera position between start and end position;
In the top left-hand corner, click on the Swap button to exchange the two positions as per your requirements;
You can see the preview of the animation on the screen.

Step 5: Add a Freeze Frame

Press the Down arrow followed by the Left arrow to go to the last frame;
Press Option-F to add a freeze-frame;
Make sure that your added frame matches the ending frame of the Ken Burns Effect.

Step 6: Adjust the Duration of the Freeze Frame

Step 7: Swap the Start and End Frame

Now, swap the start and ending frame as per your preference for the Ken Burns animation. Here’s how you can do this:

Click on the Swap button;
The start frame will match the still frame (previous one);
Grab the end frame and move it to your desired position;
Apply enough zoom in to make the black areas disappear;
Preview to see how your animation looks.

Step 8: Play/Preview Looping

Press the Play Loop button;
Tap on the Pause icon and return to editing;
Click Done and enjoy your animation.

Seems a little complicated? Filmora allows users to do Ken Burns effect, or pan and zoom effect, in much easier steps, click to download and have a try!

Part 2: How to add the Ken Burns Effect to Multiple Camera Movements?

Add the first camera movement to your image;
Duplicate the clip by click and drag option or copy and paste option;
Press the Swap button in the Ken Burns settings to reverse the start and end positions;
Verify if multiple camera movements have been added.

Extensive Reading: Why Ken Burns Effect is Named after Ken Burns?

What is the Ken Burns Effect?

Why the Effect is named after Ken Burns?

What are the Applications of Ken Burns Effect?

Conclusion

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Text to Speech Made Easy: Top Tips and Tricks for MP3 Conversion

Super Tips on Converting Text to MP3

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Text-to-Speech is an ingenious accessibility invention that has only grown more and more popular as AI has been thrown in the mix — making the converted speech sound more natural than ever!

As requested, in this article, we’ll be focusing on the subject of converting text to MP3 format (or, rather, a tangible file that you can use for projects!)

Part 1 What is TTS?

What is Text-to-Speech? Text-to-Speech, also called TTS, as previously mentioned, is an accessibility invention. It was developed to help those with vision impairment or blindness — giving them the ability to have text read to them out loud to them (without requiring someone specifically read it out loud for them.

More recent development in TTS technology has allowed it to grow more useful outside of those parameters, however. Especially seeing as it is now possible to convert text to MP3 with natural voices.

01Why Use Text to Speech Converter?

Text-to-Speech human voice converters are popular with content creators, and thus, they are the ones who see the most use for them (in the commercial sense). After all, it’s easy enough to convert already created content (in the form of text) into an audio file that there’s no reason not to! Especially since it means that more people would have access to their content!

02Benefits of Free Online Text to Speech Readers

The benefit of FREE online text-to-speech human voice converters is exactly because they are free. Getting a live voice actor to convert text to MP3 for you is very expensive — since you’re paying not only for the voice-actors hours spent but also the use of the expensive equipment that they use for creating voiceovers.

In that regard, even PAID text-to-speech converters are easier on the budget. Making it the perfect solution for content creators who want to increase the accessibility of their content but do not have the time (to create the voiceovers themselves) or the money (to hire someone else to record it).

03Features of Text to Mp3 Converter

There are lots of text-to-speech converters out there. And, depending on what you’re looking for, you might find yourself longing for extra features later on down the line. That is why, when looking to convert text to MP3 we recommend considering the following:

● Converting Time: How fast does the converter work? Most text-to-speech converters work almost instantaneously! So, if the one you’re using currently is slow? It might be best to give it a pass over to the next candidate.

● Sound Quality: You should also test out whether or not the sound quality of the converted text to speech is good.

● Multi-Language Support: Since this is all for the sake of increasing accessibility, you should start thinking about how many languages your converter supports as well. You might not be able to use all of them or even want to. But, that extra function can be helpful for the future.

● Voice-Control Options: Does the converter offers you advanced voice controls? Your average converter usually offers speed and voice options, but you might find that a text-to-speech converter with more advanced options (i.e., tone, pitch, etc. controls) may help you get better quality content in the long run.

Part 2 How to Turn on Text to Speech Converter?

For the next part of this article, we’ll be teaching you how to actually get from text to speech (MP3) with the use of a TTS converter. Specifically, a FREEmium text-to-speech converter that you can use when you’re still on the trying-out stage! This part will include a tutorial and a short introduction:

014 Steps to Use and Convert Text to Speech Online Free Unlimited?

First, for the promised tutorial! Most text-to-human voice converters function much the same way. The main difference usually being on the number of features focused and the limitations imposed (for tools with FREEmium services that impose limits on the FREE version, like the tool we’ll be using for our example):

Step 1: Upload Text

First, upload the text that you want to convert into speech!

Most online converters offer a text box that you can use in order to copy & paste the text onto (like in the image below), while others offer an ‘upload’ feature that you can use to upload text from a document.

Step 2: Adjust Voice Reader!

Next, the main thing that you usually have to worry about is the voice options.

Most TTS converters at least offer the opportunity to choose what voice you want the text to be read in. Some, more advanced solutions, may offer voices in other languages, dialects, accents, etc. as well as voice control options (tone, pitch, etc.)

Step 3: Reader Controls!

Outside of voice options, most text-to-speech converters also offer the ability to control the general outcome of the converted text to speech.

More advanced tools will have multiple options on offer for this, but even the most basic ones at least offer a method for controlling the speed at which the text is read by the voice you’ve chosen!

Step 4: Convert Text to MP3!

Now is finally the time to convert text to MP3 format! Some TTS readers will not allow for this without you paying the premium price, but most will at least offer a limited MP3 conversion feature (usually one that limits the length of conversion or the quality).

02What is the Best Free Text to Speech Software?

To finish off this section, we introduce the tool we used for our examples! It’s the online text to human voice converter, NaturalReader (URL has been provided below!) You can use this tool either directly or on your desktop (a software version is available.) It is FREEmium software though. That means that, if you want to make use of all of its advanced features, you’ll need to pay a price!

Part 3 Useful Tips on Converting Text to MP3

The tutorial in the previous section was really more for the sake of ensuring that you have the basics down and that you are familiar with how these text-to-speech converters usually work. In this next part, we’ll be focusing on “super tips”

OR, tips that allow you to generally make the most of these text-to-human voice converters to the fullest!

Tip 1: Use AI Text-to-Speech!

Our first tip is to encourage you to take full advantage of AI text-to-speech functions. Artificial Intelligence allows the converted text to sound much nicer and much more like it was read by an actual human being — which enables you to create a very professional-sounding project without having to hire a voiceover actor/actress.

Tip 2: Language and Regions Settings!

If your content is available in multiple languages and you want to convert all of the different editions of said content, you’ll need to find a converter that supports all of those languages. You may also consider looking for regional support as well. For example, for basic English language, most TTS converters usually have “American” voices as well as “British” voices to support different accents despite them using the same text.

Tip 3: Pick an Appropriate Voice!

The voice you choose to read your text is also very important. Some premium text-to-human voice converters offer a great variety to choose from to give you options when it comes to what kind of voice you want to read your content.

Tip 4: Audio Settings!

This is a bit of a rare feature, but some TTS converters will allow you to adjust your audio before it converts your content from text to speech (MP3). Sometimes, this is as simple as allowing you to choose an audio format (as is shown in the image below), other times, it allows you to control the actual sound quality of the finished product.

Tip 5: Adjust Voice Speed!

Earlier, we emphasized the importance of choosing your voice reader carefully! Now, we focus on the subject of speed. Some voices are better when they are slowed down, others are better when sped up. Play around with these settings to see which way is more natural for your chosen voice!

Tip 6: Adjust Voice Pitch

To allow for even more flexibility when it comes to voice style, you’ll find that some TTS converters will allow you to adjust voice pitch! This is a helpful feature for when you’re looking for that particular voice type, as it will allow you to experiment more with the kind of sound you want your content to be known for.

Tip 7: Voice Effects Options!

Another advanced feature that you might run into (and should definitely take advantage of), is voice effects! This, again, will allow you to fully customize the type of voice that your content is known for. It’s also great for when you’re aiming for a more natural sound (if you’re patient enough in order to take full advantage of it!)

Tip 8: Use Advanced Video Editing!

Our last tip is not on the subject of using a TTS converter itself, but on the tool, you use in order to create your final project! For that, we recommend Wondershare Filmora Video Editor .

Filmora is a content creation tool that will allow you to expand your video editing capabilities with little to no effort. It’s highly intuitive and thus incredibly very easy to use — allowing you to create and perfect your content efficiently! It’s also, in this case, very good at ensuring that you can make full use of your carefully curated TTS MP3!

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● Text-to-Speech has only continued to grow popular with content creators as the technology of it improves — allowing for more natural sounding voices and endless customizations.

● Most of these text-to-speech converters work in much the same way. All you need to do is upload the text you want to convert, adjust the voice and sound settings as needed, and you’re done!

● Of course, there are some extra little tidbits that you might also want to know in order to enhance your converted text. Our general advice for that is to experiment to the fullest and make sure that you finish everything up with a high-quality video editor like Filmora to ensure that your finished project is as near to perfect as possible!

Try It Free Try It Free

Text-to-Speech is an ingenious accessibility invention that has only grown more and more popular as AI has been thrown in the mix — making the converted speech sound more natural than ever!

As requested, in this article, we’ll be focusing on the subject of converting text to MP3 format (or, rather, a tangible file that you can use for projects!)

Part 1 What is TTS?

01Why Use Text to Speech Converter?

02Benefits of Free Online Text to Speech Readers

03Features of Text to Mp3 Converter

● Sound Quality: You should also test out whether or not the sound quality of the converted text to speech is good.

Part 2 How to Turn on Text to Speech Converter?

014 Steps to Use and Convert Text to Speech Online Free Unlimited?

Step 1: Upload Text

First, upload the text that you want to convert into speech!

Step 2: Adjust Voice Reader!

Next, the main thing that you usually have to worry about is the voice options.

Step 3: Reader Controls!

Outside of voice options, most text-to-speech converters also offer the ability to control the general outcome of the converted text to speech.

Step 4: Convert Text to MP3!

02What is the Best Free Text to Speech Software?

Part 3 Useful Tips on Converting Text to MP3

OR, tips that allow you to generally make the most of these text-to-human voice converters to the fullest!

Tip 1: Use AI Text-to-Speech!

Tip 2: Language and Regions Settings!

Tip 3: Pick an Appropriate Voice!

Tip 4: Audio Settings!

Tip 5: Adjust Voice Speed!

Tip 6: Adjust Voice Pitch

Tip 7: Voice Effects Options!

Tip 8: Use Advanced Video Editing!

Our last tip is not on the subject of using a TTS converter itself, but on the tool, you use in order to create your final project! For that, we recommend Wondershare Filmora Video Editor .

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● Text-to-Speech has only continued to grow popular with content creators as the technology of it improves — allowing for more natural sounding voices and endless customizations.

● Most of these text-to-speech converters work in much the same way. All you need to do is upload the text you want to convert, adjust the voice and sound settings as needed, and you’re done!

Try It Free Try It Free

Text-to-Speech is an ingenious accessibility invention that has only grown more and more popular as AI has been thrown in the mix — making the converted speech sound more natural than ever!

As requested, in this article, we’ll be focusing on the subject of converting text to MP3 format (or, rather, a tangible file that you can use for projects!)

Part 1 What is TTS?

01Why Use Text to Speech Converter?

02Benefits of Free Online Text to Speech Readers

03Features of Text to Mp3 Converter

● Sound Quality: You should also test out whether or not the sound quality of the converted text to speech is good.

Part 2 How to Turn on Text to Speech Converter?

014 Steps to Use and Convert Text to Speech Online Free Unlimited?

Step 1: Upload Text

First, upload the text that you want to convert into speech!

Step 2: Adjust Voice Reader!

Next, the main thing that you usually have to worry about is the voice options.

Step 3: Reader Controls!

Outside of voice options, most text-to-speech converters also offer the ability to control the general outcome of the converted text to speech.

Step 4: Convert Text to MP3!

02What is the Best Free Text to Speech Software?

Part 3 Useful Tips on Converting Text to MP3

OR, tips that allow you to generally make the most of these text-to-human voice converters to the fullest!

Tip 1: Use AI Text-to-Speech!

Tip 2: Language and Regions Settings!

Tip 3: Pick an Appropriate Voice!

Tip 4: Audio Settings!

Tip 5: Adjust Voice Speed!

Tip 6: Adjust Voice Pitch

Tip 7: Voice Effects Options!

Tip 8: Use Advanced Video Editing!

Our last tip is not on the subject of using a TTS converter itself, but on the tool, you use in order to create your final project! For that, we recommend Wondershare Filmora Video Editor .

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● Text-to-Speech has only continued to grow popular with content creators as the technology of it improves — allowing for more natural sounding voices and endless customizations.

● Most of these text-to-speech converters work in much the same way. All you need to do is upload the text you want to convert, adjust the voice and sound settings as needed, and you’re done!

Try It Free Try It Free

Text-to-Speech is an ingenious accessibility invention that has only grown more and more popular as AI has been thrown in the mix — making the converted speech sound more natural than ever!

As requested, in this article, we’ll be focusing on the subject of converting text to MP3 format (or, rather, a tangible file that you can use for projects!)

Part 1 What is TTS?

01Why Use Text to Speech Converter?

02Benefits of Free Online Text to Speech Readers

03Features of Text to Mp3 Converter

● Sound Quality: You should also test out whether or not the sound quality of the converted text to speech is good.

Part 2 How to Turn on Text to Speech Converter?

014 Steps to Use and Convert Text to Speech Online Free Unlimited?

Step 1: Upload Text

First, upload the text that you want to convert into speech!

Step 2: Adjust Voice Reader!

Next, the main thing that you usually have to worry about is the voice options.

Step 3: Reader Controls!

Outside of voice options, most text-to-speech converters also offer the ability to control the general outcome of the converted text to speech.

Step 4: Convert Text to MP3!

02What is the Best Free Text to Speech Software?

Part 3 Useful Tips on Converting Text to MP3

OR, tips that allow you to generally make the most of these text-to-human voice converters to the fullest!

Tip 1: Use AI Text-to-Speech!

Tip 2: Language and Regions Settings!

Tip 3: Pick an Appropriate Voice!

Tip 4: Audio Settings!

Tip 5: Adjust Voice Speed!

Tip 6: Adjust Voice Pitch

Tip 7: Voice Effects Options!

Tip 8: Use Advanced Video Editing!

Our last tip is not on the subject of using a TTS converter itself, but on the tool, you use in order to create your final project! For that, we recommend Wondershare Filmora Video Editor .

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● Text-to-Speech has only continued to grow popular with content creators as the technology of it improves — allowing for more natural sounding voices and endless customizations.

● Most of these text-to-speech converters work in much the same way. All you need to do is upload the text you want to convert, adjust the voice and sound settings as needed, and you’re done!

Ai Vdieo Software

Transform Your Videos A Step-by-Step Guide to Resizing for Social Media