FCP Audio Editing Essentials: Tips and Tricks for Perfect Sound

How to Edit Audio of a Video on FCP

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Mastering FCPX: Expert Solutions to Common Issues

Troubleshooting Tips for Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the time, Final Cut Pro X works great. But, when it doesn’t, here are some things you can try to get your system back to normal in no time.

Here’s the quick list:

• Quit and restart Final Cut Pro
• Check your media
• Delete render files and re-render
• Create a new library
• Create a new user account
• Trash FCP X Preferences
• Remove and re-install Final Cut Pro

1 Quit and restart Final Cut Pro

Restarting Final Cut releases and refreshes memory so that if something was confusing your system, restarting Final Cut can fix it.

2 Check your media

Frequently, problems are caused by still images that are too big. Limit your digital photos to no more than 5,000 pixels on a side. Final Cut is a video editor, not a still image editor. Images that are too large cause problems.

Also, stock footage files are known to cause problems. Be sure to convert all stock footage to ProRes 422 before importing into Final Cut Pro X.

3 Delete render files and re-render

Open your Project in the Timeline and choose File > Delete Project Render Files. Render files can become corrupt. Trashing them forces Final Cut to create new render files which often will fix the problem.

4 Create a new library

Create a new library and a new project. Then, copy and paste sections of the old project into the new project. Test each section until you find the spot that doesn’t work. At which point, you can remove or replace the bad media.

5 Create a new user account

Open System Preferences > Accounts and create a new User Account. This resets all preferences for both Final Cut and the operating system back to factory defaults. The only problem with doing this is that a new user account can’t access files stored in the Home directory of the old user account. For this reason, I always recommend storing all libraries on external hard drives, not the Home Directory.

6 Trash FCP X Preferences

Trash Final Cut Pro X preference files. There are at least three preference files and, if you’ve had a crash, there can be more. Here are the steps:

• Go to the Finder.
• Hold down on the Option key and click on the Go menu. The Library folder inside your Home Directory now shows up as a selection inside this menu. (You could also type Shift+Command+G, or select Go > Go To Folder in the Finder; then, type ~/Library/ and click Go.)
• Open to the Library > Preferences folder.
• Trash com.apple.FinalCut.LSSharedFileList.plist
• Trash com.apple.FinalCut.plist
• Trash com.apple.FinalCut.UserDestinations.plist
• Trash any other files that start with “com.apple.finalcut”.
• Empty the Trash.
• Restart Final Cut Pro X.

7 Remove and reinstall Final Cut Pro

If all else fails, delete FCPX from the Applications folder and re-install it from the Mac App Store .

One of these techniques should fix your problem. If not, it’s time to contact Apple Support .

# Recommendation:

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the time, Final Cut Pro X works great. But, when it doesn’t, here are some things you can try to get your system back to normal in no time.

Here’s the quick list:

• Quit and restart Final Cut Pro
• Check your media
• Delete render files and re-render
• Create a new library
• Create a new user account
• Trash FCP X Preferences
• Remove and re-install Final Cut Pro

1 Quit and restart Final Cut Pro

Restarting Final Cut releases and refreshes memory so that if something was confusing your system, restarting Final Cut can fix it.

2 Check your media

Frequently, problems are caused by still images that are too big. Limit your digital photos to no more than 5,000 pixels on a side. Final Cut is a video editor, not a still image editor. Images that are too large cause problems.

Also, stock footage files are known to cause problems. Be sure to convert all stock footage to ProRes 422 before importing into Final Cut Pro X.

3 Delete render files and re-render

Open your Project in the Timeline and choose File > Delete Project Render Files. Render files can become corrupt. Trashing them forces Final Cut to create new render files which often will fix the problem.

4 Create a new library

Create a new library and a new project. Then, copy and paste sections of the old project into the new project. Test each section until you find the spot that doesn’t work. At which point, you can remove or replace the bad media.

5 Create a new user account

Open System Preferences > Accounts and create a new User Account. This resets all preferences for both Final Cut and the operating system back to factory defaults. The only problem with doing this is that a new user account can’t access files stored in the Home directory of the old user account. For this reason, I always recommend storing all libraries on external hard drives, not the Home Directory.

6 Trash FCP X Preferences

Trash Final Cut Pro X preference files. There are at least three preference files and, if you’ve had a crash, there can be more. Here are the steps:

• Go to the Finder.
• Hold down on the Option key and click on the Go menu. The Library folder inside your Home Directory now shows up as a selection inside this menu. (You could also type Shift+Command+G, or select Go > Go To Folder in the Finder; then, type ~/Library/ and click Go.)
• Open to the Library > Preferences folder.
• Trash com.apple.FinalCut.LSSharedFileList.plist
• Trash com.apple.FinalCut.plist
• Trash com.apple.FinalCut.UserDestinations.plist
• Trash any other files that start with “com.apple.finalcut”.
• Empty the Trash.
• Restart Final Cut Pro X.

7 Remove and reinstall Final Cut Pro

If all else fails, delete FCPX from the Applications folder and re-install it from the Mac App Store .

One of these techniques should fix your problem. If not, it’s time to contact Apple Support .

# Recommendation:

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the time, Final Cut Pro X works great. But, when it doesn’t, here are some things you can try to get your system back to normal in no time.

Here’s the quick list:

• Quit and restart Final Cut Pro
• Check your media
• Delete render files and re-render
• Create a new library
• Create a new user account
• Trash FCP X Preferences
• Remove and re-install Final Cut Pro

1 Quit and restart Final Cut Pro

Restarting Final Cut releases and refreshes memory so that if something was confusing your system, restarting Final Cut can fix it.

2 Check your media

Frequently, problems are caused by still images that are too big. Limit your digital photos to no more than 5,000 pixels on a side. Final Cut is a video editor, not a still image editor. Images that are too large cause problems.

Also, stock footage files are known to cause problems. Be sure to convert all stock footage to ProRes 422 before importing into Final Cut Pro X.

3 Delete render files and re-render

Open your Project in the Timeline and choose File > Delete Project Render Files. Render files can become corrupt. Trashing them forces Final Cut to create new render files which often will fix the problem.

4 Create a new library

Create a new library and a new project. Then, copy and paste sections of the old project into the new project. Test each section until you find the spot that doesn’t work. At which point, you can remove or replace the bad media.

5 Create a new user account

Open System Preferences > Accounts and create a new User Account. This resets all preferences for both Final Cut and the operating system back to factory defaults. The only problem with doing this is that a new user account can’t access files stored in the Home directory of the old user account. For this reason, I always recommend storing all libraries on external hard drives, not the Home Directory.

6 Trash FCP X Preferences

Trash Final Cut Pro X preference files. There are at least three preference files and, if you’ve had a crash, there can be more. Here are the steps:

• Go to the Finder.
• Hold down on the Option key and click on the Go menu. The Library folder inside your Home Directory now shows up as a selection inside this menu. (You could also type Shift+Command+G, or select Go > Go To Folder in the Finder; then, type ~/Library/ and click Go.)
• Open to the Library > Preferences folder.
• Trash com.apple.FinalCut.LSSharedFileList.plist
• Trash com.apple.FinalCut.plist
• Trash com.apple.FinalCut.UserDestinations.plist
• Trash any other files that start with “com.apple.finalcut”.
• Empty the Trash.
• Restart Final Cut Pro X.

7 Remove and reinstall Final Cut Pro

If all else fails, delete FCPX from the Applications folder and re-install it from the Mac App Store .

One of these techniques should fix your problem. If not, it’s time to contact Apple Support .

# Recommendation:

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Most of the time, Final Cut Pro X works great. But, when it doesn’t, here are some things you can try to get your system back to normal in no time.

Here’s the quick list:

• Quit and restart Final Cut Pro
• Check your media
• Delete render files and re-render
• Create a new library
• Create a new user account
• Trash FCP X Preferences
• Remove and re-install Final Cut Pro

1 Quit and restart Final Cut Pro

Restarting Final Cut releases and refreshes memory so that if something was confusing your system, restarting Final Cut can fix it.

2 Check your media

Frequently, problems are caused by still images that are too big. Limit your digital photos to no more than 5,000 pixels on a side. Final Cut is a video editor, not a still image editor. Images that are too large cause problems.

Also, stock footage files are known to cause problems. Be sure to convert all stock footage to ProRes 422 before importing into Final Cut Pro X.

3 Delete render files and re-render

Open your Project in the Timeline and choose File > Delete Project Render Files. Render files can become corrupt. Trashing them forces Final Cut to create new render files which often will fix the problem.

4 Create a new library

Create a new library and a new project. Then, copy and paste sections of the old project into the new project. Test each section until you find the spot that doesn’t work. At which point, you can remove or replace the bad media.

5 Create a new user account

Open System Preferences > Accounts and create a new User Account. This resets all preferences for both Final Cut and the operating system back to factory defaults. The only problem with doing this is that a new user account can’t access files stored in the Home directory of the old user account. For this reason, I always recommend storing all libraries on external hard drives, not the Home Directory.

6 Trash FCP X Preferences

Trash Final Cut Pro X preference files. There are at least three preference files and, if you’ve had a crash, there can be more. Here are the steps:

• Go to the Finder.
• Hold down on the Option key and click on the Go menu. The Library folder inside your Home Directory now shows up as a selection inside this menu. (You could also type Shift+Command+G, or select Go > Go To Folder in the Finder; then, type ~/Library/ and click Go.)
• Open to the Library > Preferences folder.
• Trash com.apple.FinalCut.LSSharedFileList.plist
• Trash com.apple.FinalCut.plist
• Trash com.apple.FinalCut.UserDestinations.plist
• Trash any other files that start with “com.apple.finalcut”.
• Empty the Trash.
• Restart Final Cut Pro X.

7 Remove and reinstall Final Cut Pro

If all else fails, delete FCPX from the Applications folder and re-install it from the Mac App Store .

One of these techniques should fix your problem. If not, it’s time to contact Apple Support .

# Recommendation:

This is a basic tutorial about Apple Final Cut Pro X, professional video editing software. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

The Ultimate List: Free Open-Source Video Editors

What could be nicer than having the best software to organize your media content? The difference between open source and other software is that open source allows coding changes to personalize your experience. Essentially, video editing is the process of modifying video pictures. Find out the best Open Source Video Editors to do all that in an instant!

1 - OpenShot	2 - Shotcut
3 - Lightworks	4 - Blender
5 - Kdenlive	6 - Olive
7 - VLC	8 - NATRON
9 - Flowbade	10 - Avidemux

Want to Use a More Intelligent Way to Add Custom Video Effects than Coding?

Filmora Free Video Editor is an easy-to-use editor for creating videos. Instead of coding to change the video, Filmora offers various functions and video effects to realize the video upgrade. Furthermore, built-in AI tools will bring more convenience to you.

Use AI to Edit Video Use AI to Edit Video Learn More >

Try It Free >>

10 Best Open Source Video Editors in 2024 [Free]

Check out this list of best open source video editors that you can use to produce long-form content for YouTube, your online marketplace, or several other venues when you’re on a small budget:

Free Download

For Win 7 or later (64-bit)

Secure Download

Free Download

For macOS 10.14 or later

Secure Download

Try It Free >>

1. OpenShot

OpenShot is a free and open-source video editor with no premium features. In contrast, the website provides a donation option. You may use the complete range of functions without paying anything. This works with all versions of Windows, including Windows 7, Mac OS 10.15, and most Linux variants.

For a free site, it also has a fairly large variety of graphic effects, ranging from title themes and video transitions to 3D animations. OpenShot also differs from many other video editors in that it is updated regularly.

Unlike some other systems, OpenShot has had many major versions in 2021 alone, which addressed issues and added new capabilities. However, many users have reported substantial slowdowns when using OpenShot, so remember to look out for any efficiency difficulties.

Pros

• Easy-to-use interface
• Unlimited layers
• Super engaging

Cons

• It sometimes lags, which is inconvenient

2. Shotcut

Shotcut is a cross-platform, open-source video editing software with a large library of instructional videos. It also works with FFmpeg, 4K , ProRes, and DNxHD, among other formats. However, because Shotcut was created for Linux, many users may find the UI a little strange. Regardless, it’s still a fantastic editor.

Shotcut also has a lot of sound editing capabilities, so it’s great for audiophiles. Customers may change bass and treble, construct bandpass filters, alter gain, apply dynamic compression, and more with its array of audio fine-tuning options. FFmpeg, the dominant multimedia foundation, provides shortcut support for the newest video and audio codecs.

The native timeline editing enables customers to instantly add video files into their project folder instead of using a media library. A project uses multi-format timelines to mix up resolutions and frames per second.

Pros

• Excellent editing features
• Offers decoding and encoding features
• Multi-format timeline

Cons

• Takes a good chunk of space on your computer

3. Lightworks

Another famous video editor that can be downloaded for free is Lightworks . Lightworks is compatible with most major operating systems and devices, such as Mac, Windows, and Linux. Nevertheless, because there is no Lightworks application for iOS or Android, the system is only available on the PC at this time.

Lightworks is a powerful platform, featuring transitions, timeline-based editing, cloud and local storing, and no watermarks on the final video, yet being completely free to use. As a result, several additional features are only available with a Lightworks subscription account.

The premium edition of Lightworks charges $23.99 monthly, $239.99 annually, or $389.99 for a lifetime membership for a single user. In less than two years, the annual and monthly choices would cost more than a lifetime membership, so if you want to use Lightworks for a lot longer, you should select for lifetime access.

Pros

• A nice video editor with a lot of options
• Ideal tool for YouTube video makers who wish to edit their videos regularly
• Offers smooth service

Cons

• Only one option to save the project to MP4

Filmora AI Video Editor

Create AI-Generated Video with Filmora

Filmora AI video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with AI Create Video with AI Learn More >

Try It Free >>

4. Blender

Blender is a free, open-source content creation program on Linux, Mac OS X, and Windows systems. Unlike many other open-source editing software, Blender has no paid memberships or add-ons.

Blender differentiates apart from other software in the domain of 3D editing. Customers may sketch directly in a 3D environment by opening the 3D viewport, providing artists greater freedom than ever to tinker with both 2D and 3D concepts.

Blender also has an animated pose editor and non-linear animator features for autonomous motion and a fairly strong set of animation editing capabilities. Designers and other experienced users may use Python scripting to modify the program and expand its native toolset.

Blender has benefited from donations by hundreds of everyday users who have added several additional capabilities as an open-source platform. It is among the most comprehensive and adaptable free video editors presently accessible.

Pros

• Almost limitless customization
• Good enough to be used by experts
• Optimal features for beginner users

Cons

• Buggy format support

5. Kdenlive

Kdenlive is an open-source video editor that runs on the KDE windows desktop and is developed on Microsoft and Linux. The program provides several editorial and management features based on a specific application for executing editing tasks.

KDEnlive supports all FFmpeg-compatible formats, including MOV, AVI, WMV, MPEG, XviD, and FLV. It also has experimental support for AVCHD and covers 16:9 and 4:3 aspect ratios for PAL, NTSC, and other HD standards using HDV. You may also transfer the files to a DVD or export them to DV devices with KDEnlive.

Its common functions include preview pane, multitrack recording, artistic effects, tilting functions, video and audio thumbnails, flexible layouts, and desktop compatibility. This software supports various audio/video/image formats, including MPEG, avi, dv, vob, wav, and mp3.

Pros

• It includes light graffiti
• It has an audio spectrum and spectrogram
• An abundance of top-notch features

Cons

• Mostly for professional use

6. Olive

Olive is a total redesign from the bottom up, with cutting-edge tools to assist you in creating the greatest videos imaginable. Olive 0.2 offers node-based compositing that is both powerful and versatile.

Node editing is a type of visual programming that allows you to customize how Olive produces your video completely. OpenColorIO provides end-to-end color control for the applications.

This should help users match video from many cameras and export your movie to whichever color space you require if you’re delivering to broadcast TV online. It has a powerful, fast disk cache to ensure the cleanest possible playback. It operates quietly in the background to render pictures ahead of time, so they’re available whenever you need them.

Pros

• Decent interface
• User-friendly application
• Quick and powerful disk cache

Cons

• Lacks some high-end features

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

7. VLC

VLC media player is cross-platform open-source multimedia which is extremely popular, and for a good reason: it’s entirely free, it endorses almost every file type without any need for additional file formats, it can maximize audio and video playback for your gadget, it appears to support streaming, and it can be stretched nearly endlessly with downloadable plugins.

VLC Media Player supports MPEG and DivX streaming. ZIP files may also be played without extracting them one by one. After the download is complete, you may manually boost the volume of a movie up to 200 percent if it is too quiet. VLC Media Player also can look for album covers. Several films may be played one after the other using the playlist feature.

Pros

• A life-saver for many
• Supports a large variety of formats
• Highly customizable

Cons

• Editing metadata isn’t as straightforward as in different editors

8. Natron

On the surface, Natron appears to be a versatile and straightforward multi-platform node-based platform with a robust GUI interface. Although Natron appears to be a basic compositing program , it contains layers of intricacy that will allow your imagination to soar to new heights.

Natron’s Roto and Rotopaint toolkits are versatile, allowing for the creation of endless layers of masks, mattes, and forms. Natron features a strong 2D and Planar tracker that may help you cut down on the number of hours you spend rotoscoping to fulfill personal or business deadlines.

It includes several powerful keying and matte generating tools created by the core OFX software engineers and various tools created by the open-source plugin development community.

Pros

• Smooth functionality
• 2D tracking tools
• Offers decent editing tools

Cons

• Lacks 3D tracking tools

9. Flowblade

Flowbade is a multitrack non-linear video editor for Linux distributed under the GPL 3. You can make movies out of video clips, audio snippets, and graphics files using Flowblade Movie Editor.

Clips may be clipped at certain frames, filters can be applied to clips, and compositor elements can be used to generate multilayer composite pictures.

The toolbox, ordering, the default tool, and key timeline behaviors are all user adjustable in Flowblade. There is a drag and drop option on the interface for the video files to be imported.

Pros

• Decent default settings to accommodate users
• A good amount of editing features
• 40+ pattern wipes

Cons

• It sometimes lags on heavy videos

Professional Video Editor

Filmora is an expert in editing videos with your creation. You can use powerful tools to make your video like a masterpiece.

Edit Video Like a Pro Edit Video Like a Pro Learn More >

Try It Free >>

10. Avidemux

Avidemux is a free video editor for Windows, Mac, and Linux that doesn’t aim to be a full-fledged timeline-based video editing software. Rather, it’s made to make a few minor modifications and then splits out a new file.

You may import your source video and pick the start and finish frames to chop off segments. You may add filters to enhance the video by sharpening the picture or decreasing noise.

Some of the aesthetic options include color effects and borders, while others enhance the clip by sharpening the image or reducing noise. You may even add other clips to the end of your existing one, although this type of work would be better suited to a complete non-linear editor.

If you don’t need to make any changes to the video, Avidemux may come in handy; as part of its exporting process, it allows you to do so.

Pros

• Decent aesthetic options for video editing
• Edit multiple videos at the same time
• Multiple stickers to add to your videos

Cons

• Lags sometimes

FAQs About Open Source Video Editor

• What is an open-source video editor?

Open-source video editing software includes source code that allows you to tailor the application to your requirements. Everyone with a basic understanding of coding and video editing skills will almost certainly want to utilize an open-source video editor.

• Does OpenShot have a watermark?

Openshot is a free, open-source video editing program with no watermark. As a result, although being a completely free tool, it’s doesn’t advertise its brand on your final video. Even though the marketplace is filled with open video editing tools, most of them leave a big watermark on your movie project.

Conclusion

All of the video editors on this shortlist offer fantastic features and are completely free to use. They all have advantages and disadvantages, and you must choose depending on your requirements and usage.

We can’t state that VLC is excellent for users and Shotcut and OpenShot are fantastic for desktops, as much as we’d like to. Based on what you want to get out of it, you must choose the correct tool. And here, we hope the Open Source Video Editors reviewed will help you massively.

Want to Use a More Intelligent Way to Add Custom Video Effects than Coding?

Filmora Free Video Editor is an easy-to-use editor for creating videos. Instead of coding to change the video, Filmora offers various functions and video effects to realize the video upgrade. Furthermore, built-in AI tools will bring more convenience to you.

Use AI to Edit Video Use AI to Edit Video Learn More >

Try It Free >>

10 Best Open Source Video Editors in 2024 [Free]

Check out this list of best open source video editors that you can use to produce long-form content for YouTube, your online marketplace, or several other venues when you’re on a small budget:

Free Download

For Win 7 or later (64-bit)

Secure Download

Free Download

For macOS 10.14 or later

Secure Download

Try It Free >>

1. OpenShot

OpenShot is a free and open-source video editor with no premium features. In contrast, the website provides a donation option. You may use the complete range of functions without paying anything. This works with all versions of Windows, including Windows 7, Mac OS 10.15, and most Linux variants.

For a free site, it also has a fairly large variety of graphic effects, ranging from title themes and video transitions to 3D animations. OpenShot also differs from many other video editors in that it is updated regularly.

Unlike some other systems, OpenShot has had many major versions in 2021 alone, which addressed issues and added new capabilities. However, many users have reported substantial slowdowns when using OpenShot, so remember to look out for any efficiency difficulties.

Pros

• Easy-to-use interface
• Unlimited layers
• Super engaging

Cons

• It sometimes lags, which is inconvenient

2. Shotcut

Shotcut is a cross-platform, open-source video editing software with a large library of instructional videos. It also works with FFmpeg, 4K , ProRes, and DNxHD, among other formats. However, because Shotcut was created for Linux, many users may find the UI a little strange. Regardless, it’s still a fantastic editor.

Shotcut also has a lot of sound editing capabilities, so it’s great for audiophiles. Customers may change bass and treble, construct bandpass filters, alter gain, apply dynamic compression, and more with its array of audio fine-tuning options. FFmpeg, the dominant multimedia foundation, provides shortcut support for the newest video and audio codecs.

The native timeline editing enables customers to instantly add video files into their project folder instead of using a media library. A project uses multi-format timelines to mix up resolutions and frames per second.

Pros

• Excellent editing features
• Offers decoding and encoding features
• Multi-format timeline

Cons

• Takes a good chunk of space on your computer

3. Lightworks

Another famous video editor that can be downloaded for free is Lightworks . Lightworks is compatible with most major operating systems and devices, such as Mac, Windows, and Linux. Nevertheless, because there is no Lightworks application for iOS or Android, the system is only available on the PC at this time.

Lightworks is a powerful platform, featuring transitions, timeline-based editing, cloud and local storing, and no watermarks on the final video, yet being completely free to use. As a result, several additional features are only available with a Lightworks subscription account.

The premium edition of Lightworks charges $23.99 monthly, $239.99 annually, or $389.99 for a lifetime membership for a single user. In less than two years, the annual and monthly choices would cost more than a lifetime membership, so if you want to use Lightworks for a lot longer, you should select for lifetime access.

Pros

• A nice video editor with a lot of options
• Ideal tool for YouTube video makers who wish to edit their videos regularly
• Offers smooth service

Cons

• Only one option to save the project to MP4

Filmora AI Video Editor

Create AI-Generated Video with Filmora

Filmora AI video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with AI Create Video with AI Learn More >

Try It Free >>

4. Blender

Blender is a free, open-source content creation program on Linux, Mac OS X, and Windows systems. Unlike many other open-source editing software, Blender has no paid memberships or add-ons.

Blender differentiates apart from other software in the domain of 3D editing. Customers may sketch directly in a 3D environment by opening the 3D viewport, providing artists greater freedom than ever to tinker with both 2D and 3D concepts.

Blender also has an animated pose editor and non-linear animator features for autonomous motion and a fairly strong set of animation editing capabilities. Designers and other experienced users may use Python scripting to modify the program and expand its native toolset.

Blender has benefited from donations by hundreds of everyday users who have added several additional capabilities as an open-source platform. It is among the most comprehensive and adaptable free video editors presently accessible.

Pros

• Almost limitless customization
• Good enough to be used by experts
• Optimal features for beginner users

Cons

• Buggy format support

5. Kdenlive

Kdenlive is an open-source video editor that runs on the KDE windows desktop and is developed on Microsoft and Linux. The program provides several editorial and management features based on a specific application for executing editing tasks.

KDEnlive supports all FFmpeg-compatible formats, including MOV, AVI, WMV, MPEG, XviD, and FLV. It also has experimental support for AVCHD and covers 16:9 and 4:3 aspect ratios for PAL, NTSC, and other HD standards using HDV. You may also transfer the files to a DVD or export them to DV devices with KDEnlive.

Its common functions include preview pane, multitrack recording, artistic effects, tilting functions, video and audio thumbnails, flexible layouts, and desktop compatibility. This software supports various audio/video/image formats, including MPEG, avi, dv, vob, wav, and mp3.

Pros

• It includes light graffiti
• It has an audio spectrum and spectrogram
• An abundance of top-notch features

Cons

• Mostly for professional use

6. Olive

Olive is a total redesign from the bottom up, with cutting-edge tools to assist you in creating the greatest videos imaginable. Olive 0.2 offers node-based compositing that is both powerful and versatile.

Node editing is a type of visual programming that allows you to customize how Olive produces your video completely. OpenColorIO provides end-to-end color control for the applications.

This should help users match video from many cameras and export your movie to whichever color space you require if you’re delivering to broadcast TV online. It has a powerful, fast disk cache to ensure the cleanest possible playback. It operates quietly in the background to render pictures ahead of time, so they’re available whenever you need them.

Pros

• Decent interface
• User-friendly application
• Quick and powerful disk cache

Cons

• Lacks some high-end features

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

7. VLC

VLC media player is cross-platform open-source multimedia which is extremely popular, and for a good reason: it’s entirely free, it endorses almost every file type without any need for additional file formats, it can maximize audio and video playback for your gadget, it appears to support streaming, and it can be stretched nearly endlessly with downloadable plugins.

VLC Media Player supports MPEG and DivX streaming. ZIP files may also be played without extracting them one by one. After the download is complete, you may manually boost the volume of a movie up to 200 percent if it is too quiet. VLC Media Player also can look for album covers. Several films may be played one after the other using the playlist feature.

Pros

• A life-saver for many
• Supports a large variety of formats
• Highly customizable

Cons

• Editing metadata isn’t as straightforward as in different editors

8. Natron

On the surface, Natron appears to be a versatile and straightforward multi-platform node-based platform with a robust GUI interface. Although Natron appears to be a basic compositing program , it contains layers of intricacy that will allow your imagination to soar to new heights.

Natron’s Roto and Rotopaint toolkits are versatile, allowing for the creation of endless layers of masks, mattes, and forms. Natron features a strong 2D and Planar tracker that may help you cut down on the number of hours you spend rotoscoping to fulfill personal or business deadlines.

It includes several powerful keying and matte generating tools created by the core OFX software engineers and various tools created by the open-source plugin development community.

Pros

• Smooth functionality
• 2D tracking tools
• Offers decent editing tools

Cons

• Lacks 3D tracking tools

9. Flowblade

Flowbade is a multitrack non-linear video editor for Linux distributed under the GPL 3. You can make movies out of video clips, audio snippets, and graphics files using Flowblade Movie Editor.

Clips may be clipped at certain frames, filters can be applied to clips, and compositor elements can be used to generate multilayer composite pictures.

The toolbox, ordering, the default tool, and key timeline behaviors are all user adjustable in Flowblade. There is a drag and drop option on the interface for the video files to be imported.

Pros

• Decent default settings to accommodate users
• A good amount of editing features
• 40+ pattern wipes

Cons

• It sometimes lags on heavy videos

Professional Video Editor

Filmora is an expert in editing videos with your creation. You can use powerful tools to make your video like a masterpiece.

Edit Video Like a Pro Edit Video Like a Pro Learn More >

Try It Free >>

10. Avidemux

Avidemux is a free video editor for Windows, Mac, and Linux that doesn’t aim to be a full-fledged timeline-based video editing software. Rather, it’s made to make a few minor modifications and then splits out a new file.

You may import your source video and pick the start and finish frames to chop off segments. You may add filters to enhance the video by sharpening the picture or decreasing noise.

Some of the aesthetic options include color effects and borders, while others enhance the clip by sharpening the image or reducing noise. You may even add other clips to the end of your existing one, although this type of work would be better suited to a complete non-linear editor.

If you don’t need to make any changes to the video, Avidemux may come in handy; as part of its exporting process, it allows you to do so.

Pros

• Decent aesthetic options for video editing
• Edit multiple videos at the same time
• Multiple stickers to add to your videos

Cons

• Lags sometimes

FAQs About Open Source Video Editor

• What is an open-source video editor?

Open-source video editing software includes source code that allows you to tailor the application to your requirements. Everyone with a basic understanding of coding and video editing skills will almost certainly want to utilize an open-source video editor.

• Does OpenShot have a watermark?

Openshot is a free, open-source video editing program with no watermark. As a result, although being a completely free tool, it’s doesn’t advertise its brand on your final video. Even though the marketplace is filled with open video editing tools, most of them leave a big watermark on your movie project.

Conclusion

All of the video editors on this shortlist offer fantastic features and are completely free to use. They all have advantages and disadvantages, and you must choose depending on your requirements and usage.

We can’t state that VLC is excellent for users and Shotcut and OpenShot are fantastic for desktops, as much as we’d like to. Based on what you want to get out of it, you must choose the correct tool. And here, we hope the Open Source Video Editors reviewed will help you massively.

Want to Use a More Intelligent Way to Add Custom Video Effects than Coding?

Filmora Free Video Editor is an easy-to-use editor for creating videos. Instead of coding to change the video, Filmora offers various functions and video effects to realize the video upgrade. Furthermore, built-in AI tools will bring more convenience to you.

Use AI to Edit Video Use AI to Edit Video Learn More >

Try It Free >>

10 Best Open Source Video Editors in 2024 [Free]

Check out this list of best open source video editors that you can use to produce long-form content for YouTube, your online marketplace, or several other venues when you’re on a small budget:

Free Download

For Win 7 or later (64-bit)

Secure Download

Free Download

For macOS 10.14 or later

Secure Download

Try It Free >>

1. OpenShot

OpenShot is a free and open-source video editor with no premium features. In contrast, the website provides a donation option. You may use the complete range of functions without paying anything. This works with all versions of Windows, including Windows 7, Mac OS 10.15, and most Linux variants.

For a free site, it also has a fairly large variety of graphic effects, ranging from title themes and video transitions to 3D animations. OpenShot also differs from many other video editors in that it is updated regularly.

Unlike some other systems, OpenShot has had many major versions in 2021 alone, which addressed issues and added new capabilities. However, many users have reported substantial slowdowns when using OpenShot, so remember to look out for any efficiency difficulties.

Pros

• Easy-to-use interface
• Unlimited layers
• Super engaging

Cons

• It sometimes lags, which is inconvenient

2. Shotcut

Shotcut is a cross-platform, open-source video editing software with a large library of instructional videos. It also works with FFmpeg, 4K , ProRes, and DNxHD, among other formats. However, because Shotcut was created for Linux, many users may find the UI a little strange. Regardless, it’s still a fantastic editor.

Shotcut also has a lot of sound editing capabilities, so it’s great for audiophiles. Customers may change bass and treble, construct bandpass filters, alter gain, apply dynamic compression, and more with its array of audio fine-tuning options. FFmpeg, the dominant multimedia foundation, provides shortcut support for the newest video and audio codecs.

The native timeline editing enables customers to instantly add video files into their project folder instead of using a media library. A project uses multi-format timelines to mix up resolutions and frames per second.

Pros

• Excellent editing features
• Offers decoding and encoding features
• Multi-format timeline

Cons

• Takes a good chunk of space on your computer

3. Lightworks

Another famous video editor that can be downloaded for free is Lightworks . Lightworks is compatible with most major operating systems and devices, such as Mac, Windows, and Linux. Nevertheless, because there is no Lightworks application for iOS or Android, the system is only available on the PC at this time.

Lightworks is a powerful platform, featuring transitions, timeline-based editing, cloud and local storing, and no watermarks on the final video, yet being completely free to use. As a result, several additional features are only available with a Lightworks subscription account.

The premium edition of Lightworks charges $23.99 monthly, $239.99 annually, or $389.99 for a lifetime membership for a single user. In less than two years, the annual and monthly choices would cost more than a lifetime membership, so if you want to use Lightworks for a lot longer, you should select for lifetime access.

Pros

• A nice video editor with a lot of options
• Ideal tool for YouTube video makers who wish to edit their videos regularly
• Offers smooth service

Cons

• Only one option to save the project to MP4

Filmora AI Video Editor

Create AI-Generated Video with Filmora

Filmora AI video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with AI Create Video with AI Learn More >

Try It Free >>

4. Blender

Blender is a free, open-source content creation program on Linux, Mac OS X, and Windows systems. Unlike many other open-source editing software, Blender has no paid memberships or add-ons.

Blender differentiates apart from other software in the domain of 3D editing. Customers may sketch directly in a 3D environment by opening the 3D viewport, providing artists greater freedom than ever to tinker with both 2D and 3D concepts.

Blender also has an animated pose editor and non-linear animator features for autonomous motion and a fairly strong set of animation editing capabilities. Designers and other experienced users may use Python scripting to modify the program and expand its native toolset.

Blender has benefited from donations by hundreds of everyday users who have added several additional capabilities as an open-source platform. It is among the most comprehensive and adaptable free video editors presently accessible.

Pros

• Almost limitless customization
• Good enough to be used by experts
• Optimal features for beginner users

Cons

• Buggy format support

5. Kdenlive

Kdenlive is an open-source video editor that runs on the KDE windows desktop and is developed on Microsoft and Linux. The program provides several editorial and management features based on a specific application for executing editing tasks.

KDEnlive supports all FFmpeg-compatible formats, including MOV, AVI, WMV, MPEG, XviD, and FLV. It also has experimental support for AVCHD and covers 16:9 and 4:3 aspect ratios for PAL, NTSC, and other HD standards using HDV. You may also transfer the files to a DVD or export them to DV devices with KDEnlive.

Its common functions include preview pane, multitrack recording, artistic effects, tilting functions, video and audio thumbnails, flexible layouts, and desktop compatibility. This software supports various audio/video/image formats, including MPEG, avi, dv, vob, wav, and mp3.

Pros

• It includes light graffiti
• It has an audio spectrum and spectrogram
• An abundance of top-notch features

Cons

• Mostly for professional use

6. Olive

Olive is a total redesign from the bottom up, with cutting-edge tools to assist you in creating the greatest videos imaginable. Olive 0.2 offers node-based compositing that is both powerful and versatile.

Node editing is a type of visual programming that allows you to customize how Olive produces your video completely. OpenColorIO provides end-to-end color control for the applications.

This should help users match video from many cameras and export your movie to whichever color space you require if you’re delivering to broadcast TV online. It has a powerful, fast disk cache to ensure the cleanest possible playback. It operates quietly in the background to render pictures ahead of time, so they’re available whenever you need them.

Pros

• Decent interface
• User-friendly application
• Quick and powerful disk cache

Cons

• Lacks some high-end features

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

7. VLC

VLC media player is cross-platform open-source multimedia which is extremely popular, and for a good reason: it’s entirely free, it endorses almost every file type without any need for additional file formats, it can maximize audio and video playback for your gadget, it appears to support streaming, and it can be stretched nearly endlessly with downloadable plugins.

VLC Media Player supports MPEG and DivX streaming. ZIP files may also be played without extracting them one by one. After the download is complete, you may manually boost the volume of a movie up to 200 percent if it is too quiet. VLC Media Player also can look for album covers. Several films may be played one after the other using the playlist feature.

Pros

• A life-saver for many
• Supports a large variety of formats
• Highly customizable

Cons

• Editing metadata isn’t as straightforward as in different editors

8. Natron

On the surface, Natron appears to be a versatile and straightforward multi-platform node-based platform with a robust GUI interface. Although Natron appears to be a basic compositing program , it contains layers of intricacy that will allow your imagination to soar to new heights.

Natron’s Roto and Rotopaint toolkits are versatile, allowing for the creation of endless layers of masks, mattes, and forms. Natron features a strong 2D and Planar tracker that may help you cut down on the number of hours you spend rotoscoping to fulfill personal or business deadlines.

It includes several powerful keying and matte generating tools created by the core OFX software engineers and various tools created by the open-source plugin development community.

Pros

• Smooth functionality
• 2D tracking tools
• Offers decent editing tools

Cons

• Lacks 3D tracking tools

9. Flowblade

Flowbade is a multitrack non-linear video editor for Linux distributed under the GPL 3. You can make movies out of video clips, audio snippets, and graphics files using Flowblade Movie Editor.

Clips may be clipped at certain frames, filters can be applied to clips, and compositor elements can be used to generate multilayer composite pictures.

The toolbox, ordering, the default tool, and key timeline behaviors are all user adjustable in Flowblade. There is a drag and drop option on the interface for the video files to be imported.

Pros

• Decent default settings to accommodate users
• A good amount of editing features
• 40+ pattern wipes

Cons

• It sometimes lags on heavy videos

Professional Video Editor

Filmora is an expert in editing videos with your creation. You can use powerful tools to make your video like a masterpiece.

Edit Video Like a Pro Edit Video Like a Pro Learn More >

Try It Free >>

10. Avidemux

Avidemux is a free video editor for Windows, Mac, and Linux that doesn’t aim to be a full-fledged timeline-based video editing software. Rather, it’s made to make a few minor modifications and then splits out a new file.

You may import your source video and pick the start and finish frames to chop off segments. You may add filters to enhance the video by sharpening the picture or decreasing noise.

Some of the aesthetic options include color effects and borders, while others enhance the clip by sharpening the image or reducing noise. You may even add other clips to the end of your existing one, although this type of work would be better suited to a complete non-linear editor.

If you don’t need to make any changes to the video, Avidemux may come in handy; as part of its exporting process, it allows you to do so.

Pros

• Decent aesthetic options for video editing
• Edit multiple videos at the same time
• Multiple stickers to add to your videos

Cons

• Lags sometimes

FAQs About Open Source Video Editor

• What is an open-source video editor?

Open-source video editing software includes source code that allows you to tailor the application to your requirements. Everyone with a basic understanding of coding and video editing skills will almost certainly want to utilize an open-source video editor.

• Does OpenShot have a watermark?

Openshot is a free, open-source video editing program with no watermark. As a result, although being a completely free tool, it’s doesn’t advertise its brand on your final video. Even though the marketplace is filled with open video editing tools, most of them leave a big watermark on your movie project.

Conclusion

All of the video editors on this shortlist offer fantastic features and are completely free to use. They all have advantages and disadvantages, and you must choose depending on your requirements and usage.

We can’t state that VLC is excellent for users and Shotcut and OpenShot are fantastic for desktops, as much as we’d like to. Based on what you want to get out of it, you must choose the correct tool. And here, we hope the Open Source Video Editors reviewed will help you massively.

Want to Use a More Intelligent Way to Add Custom Video Effects than Coding?

Filmora Free Video Editor is an easy-to-use editor for creating videos. Instead of coding to change the video, Filmora offers various functions and video effects to realize the video upgrade. Furthermore, built-in AI tools will bring more convenience to you.

Use AI to Edit Video Use AI to Edit Video Learn More >

Try It Free >>

10 Best Open Source Video Editors in 2024 [Free]

Check out this list of best open source video editors that you can use to produce long-form content for YouTube, your online marketplace, or several other venues when you’re on a small budget:

Free Download

For Win 7 or later (64-bit)

Secure Download

Free Download

For macOS 10.14 or later

Secure Download

Try It Free >>

1. OpenShot

OpenShot is a free and open-source video editor with no premium features. In contrast, the website provides a donation option. You may use the complete range of functions without paying anything. This works with all versions of Windows, including Windows 7, Mac OS 10.15, and most Linux variants.

For a free site, it also has a fairly large variety of graphic effects, ranging from title themes and video transitions to 3D animations. OpenShot also differs from many other video editors in that it is updated regularly.

Unlike some other systems, OpenShot has had many major versions in 2021 alone, which addressed issues and added new capabilities. However, many users have reported substantial slowdowns when using OpenShot, so remember to look out for any efficiency difficulties.

Pros

• Easy-to-use interface
• Unlimited layers
• Super engaging

Cons

• It sometimes lags, which is inconvenient

2. Shotcut

Shotcut is a cross-platform, open-source video editing software with a large library of instructional videos. It also works with FFmpeg, 4K , ProRes, and DNxHD, among other formats. However, because Shotcut was created for Linux, many users may find the UI a little strange. Regardless, it’s still a fantastic editor.

Shotcut also has a lot of sound editing capabilities, so it’s great for audiophiles. Customers may change bass and treble, construct bandpass filters, alter gain, apply dynamic compression, and more with its array of audio fine-tuning options. FFmpeg, the dominant multimedia foundation, provides shortcut support for the newest video and audio codecs.

The native timeline editing enables customers to instantly add video files into their project folder instead of using a media library. A project uses multi-format timelines to mix up resolutions and frames per second.

Pros

• Excellent editing features
• Offers decoding and encoding features
• Multi-format timeline

Cons

• Takes a good chunk of space on your computer

3. Lightworks

Another famous video editor that can be downloaded for free is Lightworks . Lightworks is compatible with most major operating systems and devices, such as Mac, Windows, and Linux. Nevertheless, because there is no Lightworks application for iOS or Android, the system is only available on the PC at this time.

Lightworks is a powerful platform, featuring transitions, timeline-based editing, cloud and local storing, and no watermarks on the final video, yet being completely free to use. As a result, several additional features are only available with a Lightworks subscription account.

The premium edition of Lightworks charges $23.99 monthly, $239.99 annually, or $389.99 for a lifetime membership for a single user. In less than two years, the annual and monthly choices would cost more than a lifetime membership, so if you want to use Lightworks for a lot longer, you should select for lifetime access.

Pros

• A nice video editor with a lot of options
• Ideal tool for YouTube video makers who wish to edit their videos regularly
• Offers smooth service

Cons

• Only one option to save the project to MP4

Filmora AI Video Editor

Create AI-Generated Video with Filmora

Filmora AI video editor offers a ChatGPT plug-in and AI tools to enhance your creative vision. Make your idea into reality.

Create Video with AI Create Video with AI Learn More >

Try It Free >>

4. Blender

Blender is a free, open-source content creation program on Linux, Mac OS X, and Windows systems. Unlike many other open-source editing software, Blender has no paid memberships or add-ons.

Blender differentiates apart from other software in the domain of 3D editing. Customers may sketch directly in a 3D environment by opening the 3D viewport, providing artists greater freedom than ever to tinker with both 2D and 3D concepts.

Blender also has an animated pose editor and non-linear animator features for autonomous motion and a fairly strong set of animation editing capabilities. Designers and other experienced users may use Python scripting to modify the program and expand its native toolset.

Blender has benefited from donations by hundreds of everyday users who have added several additional capabilities as an open-source platform. It is among the most comprehensive and adaptable free video editors presently accessible.

Pros

• Almost limitless customization
• Good enough to be used by experts
• Optimal features for beginner users

Cons

• Buggy format support

5. Kdenlive

Kdenlive is an open-source video editor that runs on the KDE windows desktop and is developed on Microsoft and Linux. The program provides several editorial and management features based on a specific application for executing editing tasks.

KDEnlive supports all FFmpeg-compatible formats, including MOV, AVI, WMV, MPEG, XviD, and FLV. It also has experimental support for AVCHD and covers 16:9 and 4:3 aspect ratios for PAL, NTSC, and other HD standards using HDV. You may also transfer the files to a DVD or export them to DV devices with KDEnlive.

Its common functions include preview pane, multitrack recording, artistic effects, tilting functions, video and audio thumbnails, flexible layouts, and desktop compatibility. This software supports various audio/video/image formats, including MPEG, avi, dv, vob, wav, and mp3.

Pros

• It includes light graffiti
• It has an audio spectrum and spectrogram
• An abundance of top-notch features

Cons

• Mostly for professional use

6. Olive

Olive is a total redesign from the bottom up, with cutting-edge tools to assist you in creating the greatest videos imaginable. Olive 0.2 offers node-based compositing that is both powerful and versatile.

Node editing is a type of visual programming that allows you to customize how Olive produces your video completely. OpenColorIO provides end-to-end color control for the applications.

This should help users match video from many cameras and export your movie to whichever color space you require if you’re delivering to broadcast TV online. It has a powerful, fast disk cache to ensure the cleanest possible playback. It operates quietly in the background to render pictures ahead of time, so they’re available whenever you need them.

Pros

• Decent interface
• User-friendly application
• Quick and powerful disk cache

Cons

• Lacks some high-end features

A cross-platform for making videos anywhere for all creators

Why your video editing isn’t good enough? How about some creative inspo?

• 100 Million+ Users
• 150+ Countries and Regions
• 4 Million+ Social Media Followers
• 5 Million+ Stock Media for Use

Try It Free Try It Free

Try It Free

Try It Free

* Secure Download

7. VLC

VLC media player is cross-platform open-source multimedia which is extremely popular, and for a good reason: it’s entirely free, it endorses almost every file type without any need for additional file formats, it can maximize audio and video playback for your gadget, it appears to support streaming, and it can be stretched nearly endlessly with downloadable plugins.

VLC Media Player supports MPEG and DivX streaming. ZIP files may also be played without extracting them one by one. After the download is complete, you may manually boost the volume of a movie up to 200 percent if it is too quiet. VLC Media Player also can look for album covers. Several films may be played one after the other using the playlist feature.

Pros

• A life-saver for many
• Supports a large variety of formats
• Highly customizable

Cons

• Editing metadata isn’t as straightforward as in different editors

8. Natron

On the surface, Natron appears to be a versatile and straightforward multi-platform node-based platform with a robust GUI interface. Although Natron appears to be a basic compositing program , it contains layers of intricacy that will allow your imagination to soar to new heights.

Natron’s Roto and Rotopaint toolkits are versatile, allowing for the creation of endless layers of masks, mattes, and forms. Natron features a strong 2D and Planar tracker that may help you cut down on the number of hours you spend rotoscoping to fulfill personal or business deadlines.

It includes several powerful keying and matte generating tools created by the core OFX software engineers and various tools created by the open-source plugin development community.

Pros

• Smooth functionality
• 2D tracking tools
• Offers decent editing tools

Cons

• Lacks 3D tracking tools

9. Flowblade

Flowbade is a multitrack non-linear video editor for Linux distributed under the GPL 3. You can make movies out of video clips, audio snippets, and graphics files using Flowblade Movie Editor.

Clips may be clipped at certain frames, filters can be applied to clips, and compositor elements can be used to generate multilayer composite pictures.

The toolbox, ordering, the default tool, and key timeline behaviors are all user adjustable in Flowblade. There is a drag and drop option on the interface for the video files to be imported.

Pros

• Decent default settings to accommodate users
• A good amount of editing features
• 40+ pattern wipes

Cons

• It sometimes lags on heavy videos

Professional Video Editor

Filmora is an expert in editing videos with your creation. You can use powerful tools to make your video like a masterpiece.

Edit Video Like a Pro Edit Video Like a Pro Learn More >

Try It Free >>

10. Avidemux

Avidemux is a free video editor for Windows, Mac, and Linux that doesn’t aim to be a full-fledged timeline-based video editing software. Rather, it’s made to make a few minor modifications and then splits out a new file.

You may import your source video and pick the start and finish frames to chop off segments. You may add filters to enhance the video by sharpening the picture or decreasing noise.

Some of the aesthetic options include color effects and borders, while others enhance the clip by sharpening the image or reducing noise. You may even add other clips to the end of your existing one, although this type of work would be better suited to a complete non-linear editor.

If you don’t need to make any changes to the video, Avidemux may come in handy; as part of its exporting process, it allows you to do so.

Pros

• Decent aesthetic options for video editing
• Edit multiple videos at the same time
• Multiple stickers to add to your videos

Cons

• Lags sometimes

FAQs About Open Source Video Editor

• What is an open-source video editor?

Open-source video editing software includes source code that allows you to tailor the application to your requirements. Everyone with a basic understanding of coding and video editing skills will almost certainly want to utilize an open-source video editor.

• Does OpenShot have a watermark?

Openshot is a free, open-source video editing program with no watermark. As a result, although being a completely free tool, it’s doesn’t advertise its brand on your final video. Even though the marketplace is filled with open video editing tools, most of them leave a big watermark on your movie project.

Conclusion

All of the video editors on this shortlist offer fantastic features and are completely free to use. They all have advantages and disadvantages, and you must choose depending on your requirements and usage.

We can’t state that VLC is excellent for users and Shotcut and OpenShot are fantastic for desktops, as much as we’d like to. Based on what you want to get out of it, you must choose the correct tool. And here, we hope the Open Source Video Editors reviewed will help you massively.

Slow Down and Savor: How to Add Slow Motion Effects in Windows Live Movie Maker

How to Use Windows Live Movie Maker Slow Motion Effect

Ollie Mattison

Mar 27, 2024• Proven solutions

Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.

How to slow down videos in Windows Live Movie Maker

Step 1. Add photos and videos to Windows Live Movie Maker

Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.

Step 2. Slow down videos in Windows Live Movie Maker

To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).

For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .

By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?

More Powerful Video Movie Making Can Slow Down Videos

For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.

Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.

How to slow down videos in Windows Live Movie Maker

Step 1. Add photos and videos to Windows Live Movie Maker

Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.

Step 2. Slow down videos in Windows Live Movie Maker

To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).

For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .

By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?

More Powerful Video Movie Making Can Slow Down Videos

For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.

Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.

How to slow down videos in Windows Live Movie Maker

Step 1. Add photos and videos to Windows Live Movie Maker

Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.

Step 2. Slow down videos in Windows Live Movie Maker

To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).

For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .

By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?

More Powerful Video Movie Making Can Slow Down Videos

For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.

Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Slow motion effect is one of the most popular video effects. Fortunately, Windows Live Movie Maker provides this useful function for you to slow down your videos either for better presentation or better video effect. It is very easy to use Windows Live Movie Maker slow motion function. Just get Windows Live Movie Maker installed and follow the below guide to use slow motion effect in Windows Live Movie Maker.

How to slow down videos in Windows Live Movie Maker

Step 1. Add photos and videos to Windows Live Movie Maker

Click “Add videos and photos” to browse and select videos and photos from you computer to add. You can also drag and drop videos and photos to the storyboard.

Step 2. Slow down videos in Windows Live Movie Maker

To slow down videos, select the video clip and on the Edit tab under “Video Tools” choose a speed (depending on how much you want to speed the video up or slow it down).

For more Windows Live Movie Maker tips, please go to how to edit videos in Windows Live Movie Maker .

By the way, Windows Live Movie Maker is really a good free video editing software. However, compared with other video editing software, it lacks some features. Have your thought about any video editing software better than Windows Live Movie Maker, which can slow down the motion effects and with powerful edting tools at the same time?

More Powerful Video Movie Making Can Slow Down Videos

For video movie making, you can use Wondershare Filmora to make a stunning movie from your home videos. All popular video formats are supported and lots of free video transition effects are provided for your to make your videos more smooth. With an intuitive interface, even beginners can make stunning movies with this video editor software.

Besides, you can directly upload your video to YouTube for sharing with family and friends. What’s the best? There are more special editing features like Scene Detection, Close-up, Jump Cut, Mosaic, Tilt Shift, Picture-in-Picture, Face off, Audio Separation, Playback Speed. Hurry to free download Wondershare Filmora to edit your stunning videos now!

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Also read: