:max_bytes(150000):strip_icc():format(webp)/samsung-un65nu7100fxza-aaa-5b3bf3f1c9e77c00370afe54.jpg)
FCP 2023 The Ultimate Guide to Editing and Mixing Audio for Video for 2024
FCP 2023: The Ultimate Guide to Editing and Mixing Audio for Video
How to Edit Audio of a Video on FCP
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.
You May Also Like: How to Edit YouTube Audio >>
Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
How to edit audio on FCP
There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.
Section 1 Clip-level audio editing
While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.
The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.
Related Article: How to fade in/out audio in Final Cut Pro >>
Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.
Section 2: Advanced Audio Editing
The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.
In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.
Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.
The Audio Inspector would allow you to apply the following effects:
- The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
- Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.
- Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.
- Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.
- Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.
Here’s the video tutorial on how to edit audios in Final Cut Pro:
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Click-Worthy Thumbnails: A Guide to YouTube Image Sizes and Best Practices
YouTube Thumbnail Size Template & Practical Tactics for You
An easy yet powerful editor
Numerous effects to choose from
Detailed tutorials provided by the official channel
A YouTube thumbnail is like a cover page of your video that creates the first impression. Though a default thumbnail is created for each video by YouTube, you can always customize it and make it more appealing and attractive.
More in detail about Youtube thumbnail size template, tips, and others can be learned from the following content.
In this article
01 [Youtube Thumbnail Specifications ](#Part 1)
02 [Youtube Thumbnail Templates](#Part 2)
03 [Top 5 Tips for Creating Effective Thumbnails](#Part 3)
04 [How to Add a Customized Thumbnail to a Youtube Video](#Part 4)
Part 1 YouTube Thumbnail Specifications
To stand out from the crowd and create an impact over the viewers, a well-customized thumbnail works great. A customized thumbnail proves effective in ways more than one like encouraging attention, increasing engagement, giving a professional look, portraying your personality, and much more. The right size of the thumbnail is an important consideration and the following are the suggested YouTube video thumbnail dimensions.
● An ideal width and height of YouTube thumbnail size is 1280 X 720 pixels
● The size of the thumbnail should be kept under 2MB.
● Use the thumbnail in JPEG, PNG, BMP, or GIF format.
● The ideal thumbnail ratio for YouTube has to be kept at 16:9.
● The width of the thumbnail should not be less than 640 pixels.
Part 2 YouTube Thumbnail Templates
If you are struggling to find the right thumbnail for your video, templates are a great rescue. There are several sites and programs where you can find multiple templates that can be customized and edited to suit your requirements. We have shortlisted a few sites where you can check different types of interesting templates for the YouTube thumbnails.
● Canva: This online site has a huge collection of free as well as paid video thumbnails in different categories, and types. You can filter the collection of templates based on style and theme. The templates can be further customized as needed after which they can be downloaded to be used on YouTube.
● VistaCreate: Interesting template designs are available at this site to be used as a YouTube video thumbnail. You can even create your own design or customize the ones available. The site also has an option to choose the desired thumbnail design using the search bar.
● Postermywall: YouTube templates in an array of designs, themes, and genres are available at this site. There are also Youtube Thumbnail Size Template and from these you can choose the one that matches the personality of your video and customize it as per the requirements. The search bar to look for your choice of template is also available.
● Visme: Templates for all types of video thumbnails are available at this site to choose from. You simply need to choose the template as per your choice and you are all set to have an impressive thumbnail for your video. You can even look for your choice of design using the search bar.
● Snappa: There is a wide selection of templates in different categories at this site that can be used for creating a customized thumbnail for your YouTube videos. The templates are free and you need to create a free account on the site to use them.
Part 3 Top 5 Tips For Creating Effective Thumbnails
To make your thumbnails interesting and effective we have shortlisted a few useful tips as below.
● Keep it clutter-free: It’s always good to keep your thumbnail simple and clean without any clutter. If you use too many elements in a thumbnail, they will look messy when watched on a mobile device.
● Using a still image from the video: Though you can set a customized thumbnail for your videos, an automatic image is also selected by YouTube. It might be a possibility that the image automatically selected is good enough and effective and thus creating a customized thumbnail is not required.
● Using editing software like Wondershare Filmora Video Editor for creating customized graphics: A good editing software can be used for creating an effective and impressive image. Wondershare Filmora is one such professional tool that can be considered. This Windows and Mac-based program can let you edit your images using multiple features. Simple and fast to use, the software also supports batch processing so that multiple files as thumbnails for multiple videos can be created at a time. Additional features supported by the software include motion tracking, adding text and tiles, adding overlays and filters, adding transitions and elements, color tuning, and more.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
● Use eye-catchy titles: Using catchy titles in your thumbnails is an effective way to grab the attention of the viewers. A title will give a glimpse to the viewers of the content of the video.
● Try different designs: If you are not sure about a thumbnail design, create multiple ones and then add them to the video one by one. Select the design that goes best and looks attractive.
Part 4 How to Add A Customized Thumbnail To A Youtube Video
Once a customized thumbnail image is created, the next step is to add it to the video on your YouTube. The process is simple and quick and involves the following steps.
Step 1. Open your YouTube account and add the new video using the camera-plus icon. Alternatively, to add a thumbnail to the already uploaded video, go to the Studio dashboard and tap on the video for editing the settings.
Step 2. At the bottom of the video settings window, you can see the 3 thumbnails generated automatically. To upload the customized image, click on the Custom thumbnail box at the bottom right-hand side.
Step 3. Browse and import the created thumbnail image and click on the Upload button.
The selected image will not be used as the thumbnail for the video.
Key Takeaways from This Episode
● A YouTube thumbnail works as the cover for your video and is the first thing that will get the attention and the interest of the viewer.
● YouTube video thumbnail dimensions as recommended must be used.
● Several pre-designed templates are available for creating interesting thumbnails.
● To create an effective thumbnail, several tips and tricks can be used like using editing software like Wondershare Filmora.
A YouTube thumbnail is like a cover page of your video that creates the first impression. Though a default thumbnail is created for each video by YouTube, you can always customize it and make it more appealing and attractive.
More in detail about Youtube thumbnail size template, tips, and others can be learned from the following content.
In this article
01 [Youtube Thumbnail Specifications ](#Part 1)
02 [Youtube Thumbnail Templates](#Part 2)
03 [Top 5 Tips for Creating Effective Thumbnails](#Part 3)
04 [How to Add a Customized Thumbnail to a Youtube Video](#Part 4)
Part 1 YouTube Thumbnail Specifications
To stand out from the crowd and create an impact over the viewers, a well-customized thumbnail works great. A customized thumbnail proves effective in ways more than one like encouraging attention, increasing engagement, giving a professional look, portraying your personality, and much more. The right size of the thumbnail is an important consideration and the following are the suggested YouTube video thumbnail dimensions.
● An ideal width and height of YouTube thumbnail size is 1280 X 720 pixels
● The size of the thumbnail should be kept under 2MB.
● Use the thumbnail in JPEG, PNG, BMP, or GIF format.
● The ideal thumbnail ratio for YouTube has to be kept at 16:9.
● The width of the thumbnail should not be less than 640 pixels.
Part 2 YouTube Thumbnail Templates
If you are struggling to find the right thumbnail for your video, templates are a great rescue. There are several sites and programs where you can find multiple templates that can be customized and edited to suit your requirements. We have shortlisted a few sites where you can check different types of interesting templates for the YouTube thumbnails.
● Canva: This online site has a huge collection of free as well as paid video thumbnails in different categories, and types. You can filter the collection of templates based on style and theme. The templates can be further customized as needed after which they can be downloaded to be used on YouTube.
● VistaCreate: Interesting template designs are available at this site to be used as a YouTube video thumbnail. You can even create your own design or customize the ones available. The site also has an option to choose the desired thumbnail design using the search bar.
● Postermywall: YouTube templates in an array of designs, themes, and genres are available at this site. There are also Youtube Thumbnail Size Template and from these you can choose the one that matches the personality of your video and customize it as per the requirements. The search bar to look for your choice of template is also available.
● Visme: Templates for all types of video thumbnails are available at this site to choose from. You simply need to choose the template as per your choice and you are all set to have an impressive thumbnail for your video. You can even look for your choice of design using the search bar.
● Snappa: There is a wide selection of templates in different categories at this site that can be used for creating a customized thumbnail for your YouTube videos. The templates are free and you need to create a free account on the site to use them.
Part 3 Top 5 Tips For Creating Effective Thumbnails
To make your thumbnails interesting and effective we have shortlisted a few useful tips as below.
● Keep it clutter-free: It’s always good to keep your thumbnail simple and clean without any clutter. If you use too many elements in a thumbnail, they will look messy when watched on a mobile device.
● Using a still image from the video: Though you can set a customized thumbnail for your videos, an automatic image is also selected by YouTube. It might be a possibility that the image automatically selected is good enough and effective and thus creating a customized thumbnail is not required.
● Using editing software like Wondershare Filmora Video Editor for creating customized graphics: A good editing software can be used for creating an effective and impressive image. Wondershare Filmora is one such professional tool that can be considered. This Windows and Mac-based program can let you edit your images using multiple features. Simple and fast to use, the software also supports batch processing so that multiple files as thumbnails for multiple videos can be created at a time. Additional features supported by the software include motion tracking, adding text and tiles, adding overlays and filters, adding transitions and elements, color tuning, and more.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
● Use eye-catchy titles: Using catchy titles in your thumbnails is an effective way to grab the attention of the viewers. A title will give a glimpse to the viewers of the content of the video.
● Try different designs: If you are not sure about a thumbnail design, create multiple ones and then add them to the video one by one. Select the design that goes best and looks attractive.
Part 4 How to Add A Customized Thumbnail To A Youtube Video
Once a customized thumbnail image is created, the next step is to add it to the video on your YouTube. The process is simple and quick and involves the following steps.
Step 1. Open your YouTube account and add the new video using the camera-plus icon. Alternatively, to add a thumbnail to the already uploaded video, go to the Studio dashboard and tap on the video for editing the settings.
Step 2. At the bottom of the video settings window, you can see the 3 thumbnails generated automatically. To upload the customized image, click on the Custom thumbnail box at the bottom right-hand side.
Step 3. Browse and import the created thumbnail image and click on the Upload button.
The selected image will not be used as the thumbnail for the video.
Key Takeaways from This Episode
● A YouTube thumbnail works as the cover for your video and is the first thing that will get the attention and the interest of the viewer.
● YouTube video thumbnail dimensions as recommended must be used.
● Several pre-designed templates are available for creating interesting thumbnails.
● To create an effective thumbnail, several tips and tricks can be used like using editing software like Wondershare Filmora.
A YouTube thumbnail is like a cover page of your video that creates the first impression. Though a default thumbnail is created for each video by YouTube, you can always customize it and make it more appealing and attractive.
More in detail about Youtube thumbnail size template, tips, and others can be learned from the following content.
In this article
01 [Youtube Thumbnail Specifications ](#Part 1)
02 [Youtube Thumbnail Templates](#Part 2)
03 [Top 5 Tips for Creating Effective Thumbnails](#Part 3)
04 [How to Add a Customized Thumbnail to a Youtube Video](#Part 4)
Part 1 YouTube Thumbnail Specifications
To stand out from the crowd and create an impact over the viewers, a well-customized thumbnail works great. A customized thumbnail proves effective in ways more than one like encouraging attention, increasing engagement, giving a professional look, portraying your personality, and much more. The right size of the thumbnail is an important consideration and the following are the suggested YouTube video thumbnail dimensions.
● An ideal width and height of YouTube thumbnail size is 1280 X 720 pixels
● The size of the thumbnail should be kept under 2MB.
● Use the thumbnail in JPEG, PNG, BMP, or GIF format.
● The ideal thumbnail ratio for YouTube has to be kept at 16:9.
● The width of the thumbnail should not be less than 640 pixels.
Part 2 YouTube Thumbnail Templates
If you are struggling to find the right thumbnail for your video, templates are a great rescue. There are several sites and programs where you can find multiple templates that can be customized and edited to suit your requirements. We have shortlisted a few sites where you can check different types of interesting templates for the YouTube thumbnails.
● Canva: This online site has a huge collection of free as well as paid video thumbnails in different categories, and types. You can filter the collection of templates based on style and theme. The templates can be further customized as needed after which they can be downloaded to be used on YouTube.
● VistaCreate: Interesting template designs are available at this site to be used as a YouTube video thumbnail. You can even create your own design or customize the ones available. The site also has an option to choose the desired thumbnail design using the search bar.
● Postermywall: YouTube templates in an array of designs, themes, and genres are available at this site. There are also Youtube Thumbnail Size Template and from these you can choose the one that matches the personality of your video and customize it as per the requirements. The search bar to look for your choice of template is also available.
● Visme: Templates for all types of video thumbnails are available at this site to choose from. You simply need to choose the template as per your choice and you are all set to have an impressive thumbnail for your video. You can even look for your choice of design using the search bar.
● Snappa: There is a wide selection of templates in different categories at this site that can be used for creating a customized thumbnail for your YouTube videos. The templates are free and you need to create a free account on the site to use them.
Part 3 Top 5 Tips For Creating Effective Thumbnails
To make your thumbnails interesting and effective we have shortlisted a few useful tips as below.
● Keep it clutter-free: It’s always good to keep your thumbnail simple and clean without any clutter. If you use too many elements in a thumbnail, they will look messy when watched on a mobile device.
● Using a still image from the video: Though you can set a customized thumbnail for your videos, an automatic image is also selected by YouTube. It might be a possibility that the image automatically selected is good enough and effective and thus creating a customized thumbnail is not required.
● Using editing software like Wondershare Filmora Video Editor for creating customized graphics: A good editing software can be used for creating an effective and impressive image. Wondershare Filmora is one such professional tool that can be considered. This Windows and Mac-based program can let you edit your images using multiple features. Simple and fast to use, the software also supports batch processing so that multiple files as thumbnails for multiple videos can be created at a time. Additional features supported by the software include motion tracking, adding text and tiles, adding overlays and filters, adding transitions and elements, color tuning, and more.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
● Use eye-catchy titles: Using catchy titles in your thumbnails is an effective way to grab the attention of the viewers. A title will give a glimpse to the viewers of the content of the video.
● Try different designs: If you are not sure about a thumbnail design, create multiple ones and then add them to the video one by one. Select the design that goes best and looks attractive.
Part 4 How to Add A Customized Thumbnail To A Youtube Video
Once a customized thumbnail image is created, the next step is to add it to the video on your YouTube. The process is simple and quick and involves the following steps.
Step 1. Open your YouTube account and add the new video using the camera-plus icon. Alternatively, to add a thumbnail to the already uploaded video, go to the Studio dashboard and tap on the video for editing the settings.
Step 2. At the bottom of the video settings window, you can see the 3 thumbnails generated automatically. To upload the customized image, click on the Custom thumbnail box at the bottom right-hand side.
Step 3. Browse and import the created thumbnail image and click on the Upload button.
The selected image will not be used as the thumbnail for the video.
Key Takeaways from This Episode
● A YouTube thumbnail works as the cover for your video and is the first thing that will get the attention and the interest of the viewer.
● YouTube video thumbnail dimensions as recommended must be used.
● Several pre-designed templates are available for creating interesting thumbnails.
● To create an effective thumbnail, several tips and tricks can be used like using editing software like Wondershare Filmora.
A YouTube thumbnail is like a cover page of your video that creates the first impression. Though a default thumbnail is created for each video by YouTube, you can always customize it and make it more appealing and attractive.
More in detail about Youtube thumbnail size template, tips, and others can be learned from the following content.
In this article
01 [Youtube Thumbnail Specifications ](#Part 1)
02 [Youtube Thumbnail Templates](#Part 2)
03 [Top 5 Tips for Creating Effective Thumbnails](#Part 3)
04 [How to Add a Customized Thumbnail to a Youtube Video](#Part 4)
Part 1 YouTube Thumbnail Specifications
To stand out from the crowd and create an impact over the viewers, a well-customized thumbnail works great. A customized thumbnail proves effective in ways more than one like encouraging attention, increasing engagement, giving a professional look, portraying your personality, and much more. The right size of the thumbnail is an important consideration and the following are the suggested YouTube video thumbnail dimensions.
● An ideal width and height of YouTube thumbnail size is 1280 X 720 pixels
● The size of the thumbnail should be kept under 2MB.
● Use the thumbnail in JPEG, PNG, BMP, or GIF format.
● The ideal thumbnail ratio for YouTube has to be kept at 16:9.
● The width of the thumbnail should not be less than 640 pixels.
Part 2 YouTube Thumbnail Templates
If you are struggling to find the right thumbnail for your video, templates are a great rescue. There are several sites and programs where you can find multiple templates that can be customized and edited to suit your requirements. We have shortlisted a few sites where you can check different types of interesting templates for the YouTube thumbnails.
● Canva: This online site has a huge collection of free as well as paid video thumbnails in different categories, and types. You can filter the collection of templates based on style and theme. The templates can be further customized as needed after which they can be downloaded to be used on YouTube.
● VistaCreate: Interesting template designs are available at this site to be used as a YouTube video thumbnail. You can even create your own design or customize the ones available. The site also has an option to choose the desired thumbnail design using the search bar.
● Postermywall: YouTube templates in an array of designs, themes, and genres are available at this site. There are also Youtube Thumbnail Size Template and from these you can choose the one that matches the personality of your video and customize it as per the requirements. The search bar to look for your choice of template is also available.
● Visme: Templates for all types of video thumbnails are available at this site to choose from. You simply need to choose the template as per your choice and you are all set to have an impressive thumbnail for your video. You can even look for your choice of design using the search bar.
● Snappa: There is a wide selection of templates in different categories at this site that can be used for creating a customized thumbnail for your YouTube videos. The templates are free and you need to create a free account on the site to use them.
Part 3 Top 5 Tips For Creating Effective Thumbnails
To make your thumbnails interesting and effective we have shortlisted a few useful tips as below.
● Keep it clutter-free: It’s always good to keep your thumbnail simple and clean without any clutter. If you use too many elements in a thumbnail, they will look messy when watched on a mobile device.
● Using a still image from the video: Though you can set a customized thumbnail for your videos, an automatic image is also selected by YouTube. It might be a possibility that the image automatically selected is good enough and effective and thus creating a customized thumbnail is not required.
● Using editing software like Wondershare Filmora Video Editor for creating customized graphics: A good editing software can be used for creating an effective and impressive image. Wondershare Filmora is one such professional tool that can be considered. This Windows and Mac-based program can let you edit your images using multiple features. Simple and fast to use, the software also supports batch processing so that multiple files as thumbnails for multiple videos can be created at a time. Additional features supported by the software include motion tracking, adding text and tiles, adding overlays and filters, adding transitions and elements, color tuning, and more.
Wondershare Filmora
Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!
Try It Free Try It Free Try It Free Learn More >
● Use eye-catchy titles: Using catchy titles in your thumbnails is an effective way to grab the attention of the viewers. A title will give a glimpse to the viewers of the content of the video.
● Try different designs: If you are not sure about a thumbnail design, create multiple ones and then add them to the video one by one. Select the design that goes best and looks attractive.
Part 4 How to Add A Customized Thumbnail To A Youtube Video
Once a customized thumbnail image is created, the next step is to add it to the video on your YouTube. The process is simple and quick and involves the following steps.
Step 1. Open your YouTube account and add the new video using the camera-plus icon. Alternatively, to add a thumbnail to the already uploaded video, go to the Studio dashboard and tap on the video for editing the settings.
Step 2. At the bottom of the video settings window, you can see the 3 thumbnails generated automatically. To upload the customized image, click on the Custom thumbnail box at the bottom right-hand side.
Step 3. Browse and import the created thumbnail image and click on the Upload button.
The selected image will not be used as the thumbnail for the video.
Key Takeaways from This Episode
● A YouTube thumbnail works as the cover for your video and is the first thing that will get the attention and the interest of the viewer.
● YouTube video thumbnail dimensions as recommended must be used.
● Several pre-designed templates are available for creating interesting thumbnails.
● To create an effective thumbnail, several tips and tricks can be used like using editing software like Wondershare Filmora.
Video to Image: How to Convert Videos to Photos ? [10 Converters]
Video to Image: How to Convert Videos to Photos
Ollie Mattison
Mar 27, 2024• Proven solutions
If a video is recorded at the standard frame rate , each second of that video will contain 24 individual images or frames. Nearly all modern video editing software products grant you access to each frame a video clip contains, which can be quite useful if you want to create a quick preview of the footage you are editing.
Even though converting a video to a photo is not something you can do, creating JPEG on PNG image files from the video you recorded with a smartphone or a professional video camera takes only a few moments of your time. Read on if you would like to learn how to extract still images from video clips in desktop-based and online video converters.
- Part 1: Convert Video to Still Images on Windows on Mac with Offline Software
- Part 2: Convert Video to JPG/PNG Images Online
Part 1: Converting Videos to JPEG and PNG Images with Desktop Video Converters for macOS and Windows
Exporting a single frame of a video clip is an easy task even amateur photo and video editors can perform effortlessly. Mac and PC users have a broad range of options at their disposal if they want to make still images from their videos. Let’s have a look at some of the best video converters you can use to capture still frames and create JPEG or PNG files.
1. Wondershare Filmora
Filmora is a video editing software that also offers the option to capture frames of all video clips you use in your projects after you launch the Filmora video editor, import a video file that contains the frames you would like to save as still images.
To extract still images with the original high quality, you can import and place these videos to Project Media and then double-click it to preview. In the preview window, click the Camera icon located in the lower right corner to take a snapshot. It is worth noting that you can only create PNG files with this video editing software, and you may need to change the photo format if PNG isn’t your choice.
Alternatively, you can use the CTRL+ALT+S keyboard shortcut to take a snapshot of the frame in a video clip. The image you created will be added to the Media tab automatically, and you can proceed to right-click on it and select the Reveal in Explorer option to gain access to the original file.
To extract still image from the video frame by frame, you can add the media asset to the timeline and use the playhead to find the frame you would like to extract from the video. When done, leave the playhead at the location on the timeline where the frame is located, and then click on the Snapshot icon.
Below is the video tutorial about how to convert Video to Images Filmora.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
2. Adobe Photoshop
This is arguably the best photo editing software ever created that grants you access to all the tools you need to manipulate pictures as you see fit. Adobe Photoshop also enables its users to edit videos, although in a limited capacity. In order to turn a video into a series of separate frames, you just have to import a video file into Adobe Photoshop by clicking on the file menu and selecting the Import option.
The video clip is going to be displayed on the timeline that is located at the bottom of the screen and you just have to specify the segment of that file you would like to break down into frames. You can do this by dragging the handles located above the video clip that allows you to set the start and end of the work area.
When done, head over to the File menu, and select the Render Video option from the Export submenu. After the Render Video window pops up on the screen, you have to change the Adobe Media Encoder option to Photoshop Image Sequence and then click on the Render button. You should keep in mind that the photo editor is going to create separate image files for all the frames that were within the work area you defined, which is why it is important to reduce the work area to the minimum in order to avoid generating hundreds of JPEG images.
3. VLC Media Player
Extracting still frames with VLC media players is a technical process that will require some understanding of the video editing process. Even so, you can still use this open-source software to generate PNG or JPEG files from your videos.
Select the Preferences option from the Tools menu and then click on the Video tab. Make sure that the All option is selected under Show Settings and scroll down until you find the Filters option and expand this menu. Locate the Scene Filter, click on it and then proceed to specify the format in which your images are going to be saved and adjust the Recording Ratio.
Click on the Save button to confirm the changes, then go back to the Filter submenu, and this time you should click on it rather than expand it. Locate the Scene Video filter, make sure that the checkbox next to it is selected, and click OK to complete the process.
Next time you play a video in VLC the media player will automatically capture still frames at the recording ratio you specified.
4. Free Video to JPEG Converter
If you are looking for a quick and free way to create still images from videos, this Windows-based tool is one of the least complicated options PC users have at their disposal. After you open Free Video to JPEG Converter you just have to click on the Add Files button and import a video from which you would like to extract still frames.
You can then specify the frequency at which frames are going to be extracted and see the total number of frames that are going to be created from your video. Afterward, you just have to specify the location at which the still frames are going to be saved and click on the Convert button.
5. Virtual Dub
Before you can start extracting still frames from videos with Virtual Dub, you must first install the FFMpeg plugin pack because this video converter cannot open common video file formats like MP4 or MOV. Installing this plugin can get a little technical, but it is far from being complicated. Afterward, you just have to launch Virtual Dub and import the video you would like to use to create JPEG files by clicking on the File menu and selecting the Open option.
Select the Frame Rate option from the Video menu and make sure that the checkbox next to the Decimate by setting is selected. Insert the frequency at which still frames are going to be captured into the box next to the Decimate by setting and click on the OK button. Head over to the File menu and select the Image Sequence option from the Export submenu. Before you start extracting still frames from a video you just have to select the file format of the output files, and then wait for Virtual Dub to complete the process.
Part 2: Converting Videos to JPEG or PNG Images Online
In case you don’t have access to a video or photo editing software and the process of extracting still frames from videos with VLC Media Player or Virtual Dub is too technical for you, there are a number of online solutions you can try. Here are some of the best web-based platforms you can use to convert videos to JPEG or PNG images.
1. Online-Convert
This file conversion platform enables you to convert audio files, documents, and eBooks, but its video to photo conversion options are not the best. You have to select the Image Converter tool and then choose the output format of the images you want to extract from the video. You can then upload a video file from Dropbox, Google Drive, or your computer’s hard drive.
Before the conversion, you can adjust the Quality Settings and choose if the compression is going to be high, medium, or low, but you must be logged in to save these changes. Click on the Start Conversion button when ready, and wait for the platform to process your video. Each frame of the video you uploaded is going to be converted into a photo and you can choose how many images you want to download or delete.
2. AConvert
Converting virtually any type of file with AConvert is easy, which means that you won’t have much trouble extracting JPEG files from your video. After you arrive at AConvert’s home page, you just have to click on the Image option and then choose if you want to import a file from your computer or cloud storage. The maximum size of the video file you can upload to AConvert is limited to just 200MB.
Once the video file you selected is uploaded to the platform you can choose the output file format and decide if you want to resize the images during the conversion or keep their original size. Click on the Convert Now button and then download the image files once the still frames are extracted from the video.
3. Online Converter
Online Converter offers a variety of image conversion options and it even enables you to convert raw format photos into JPEGs. Its Video to JPEG tool supports nearly all common video file formats, which enables you to extract still frames from videos without having to worry about their compatibility with this tool. You can either upload a video via URL or from a local hard drive, but its size cannot be larger than 200 MB.
The platform lets you choose if you want to cut a video clip, change its frame size or adjust its quality. Once you fine-tune all the settings click on the Convert button to start creating JPEG files from a video and then download the images to your computer.
4. IMG2GO
Editing or converting images with IMG2GO doesn’t require you to have any previous experience, since all the tools this platform offers are easy to use. Convert to JPEG tool can break down an entire video clip into photos in just a few moments. All you have to do is upload a file to the platform, adjust the settings and click on the Start button that is located at the bottom of the page.
The number of JPEG files IMG2GO will generate depends on the duration of the clip, which is the reason why it is better to extract still frames from shorter videos. Once the conversion process is completed you can choose if you want to save the images on the cloud or to a local hard drive.
5. Kapwing
Kapwing offers a collection of video editing tools you can use to merge multiple video clips together, add audio to video files or create subtitles. The Convert Video tool lets create MP3, GIF, JPEG, or MP4 files from a video file.
After you upload a video to Kapwing you just have to click on the JPEG option and use the slider below the Preview Window to specify the frame you want to convert into a photo. Click on the Create button and then proceed to share the image you created on social media or download it to your computer. Keep in mind that all still frames are going to be watermarked if you are not signed in to your Kapwing account.
You may also like: How to Convert SWF to MP4 Free for Windows/Mac/Online >>
Conclusion
Extracting a still frame is a routine task that requires a minimum amount of time or effort regardless of the tool you are using to perform this task. Even so, how fast this process is going to be, depends on the video converter you choose. Which video converter do you use to convert videos to JPEG or PNG images? Leave a comment below and let us know.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If a video is recorded at the standard frame rate , each second of that video will contain 24 individual images or frames. Nearly all modern video editing software products grant you access to each frame a video clip contains, which can be quite useful if you want to create a quick preview of the footage you are editing.
Even though converting a video to a photo is not something you can do, creating JPEG on PNG image files from the video you recorded with a smartphone or a professional video camera takes only a few moments of your time. Read on if you would like to learn how to extract still images from video clips in desktop-based and online video converters.
- Part 1: Convert Video to Still Images on Windows on Mac with Offline Software
- Part 2: Convert Video to JPG/PNG Images Online
Part 1: Converting Videos to JPEG and PNG Images with Desktop Video Converters for macOS and Windows
Exporting a single frame of a video clip is an easy task even amateur photo and video editors can perform effortlessly. Mac and PC users have a broad range of options at their disposal if they want to make still images from their videos. Let’s have a look at some of the best video converters you can use to capture still frames and create JPEG or PNG files.
1. Wondershare Filmora
Filmora is a video editing software that also offers the option to capture frames of all video clips you use in your projects after you launch the Filmora video editor, import a video file that contains the frames you would like to save as still images.
To extract still images with the original high quality, you can import and place these videos to Project Media and then double-click it to preview. In the preview window, click the Camera icon located in the lower right corner to take a snapshot. It is worth noting that you can only create PNG files with this video editing software, and you may need to change the photo format if PNG isn’t your choice.
Alternatively, you can use the CTRL+ALT+S keyboard shortcut to take a snapshot of the frame in a video clip. The image you created will be added to the Media tab automatically, and you can proceed to right-click on it and select the Reveal in Explorer option to gain access to the original file.
To extract still image from the video frame by frame, you can add the media asset to the timeline and use the playhead to find the frame you would like to extract from the video. When done, leave the playhead at the location on the timeline where the frame is located, and then click on the Snapshot icon.
Below is the video tutorial about how to convert Video to Images Filmora.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
2. Adobe Photoshop
This is arguably the best photo editing software ever created that grants you access to all the tools you need to manipulate pictures as you see fit. Adobe Photoshop also enables its users to edit videos, although in a limited capacity. In order to turn a video into a series of separate frames, you just have to import a video file into Adobe Photoshop by clicking on the file menu and selecting the Import option.
The video clip is going to be displayed on the timeline that is located at the bottom of the screen and you just have to specify the segment of that file you would like to break down into frames. You can do this by dragging the handles located above the video clip that allows you to set the start and end of the work area.
When done, head over to the File menu, and select the Render Video option from the Export submenu. After the Render Video window pops up on the screen, you have to change the Adobe Media Encoder option to Photoshop Image Sequence and then click on the Render button. You should keep in mind that the photo editor is going to create separate image files for all the frames that were within the work area you defined, which is why it is important to reduce the work area to the minimum in order to avoid generating hundreds of JPEG images.
3. VLC Media Player
Extracting still frames with VLC media players is a technical process that will require some understanding of the video editing process. Even so, you can still use this open-source software to generate PNG or JPEG files from your videos.
Select the Preferences option from the Tools menu and then click on the Video tab. Make sure that the All option is selected under Show Settings and scroll down until you find the Filters option and expand this menu. Locate the Scene Filter, click on it and then proceed to specify the format in which your images are going to be saved and adjust the Recording Ratio.
Click on the Save button to confirm the changes, then go back to the Filter submenu, and this time you should click on it rather than expand it. Locate the Scene Video filter, make sure that the checkbox next to it is selected, and click OK to complete the process.
Next time you play a video in VLC the media player will automatically capture still frames at the recording ratio you specified.
4. Free Video to JPEG Converter
If you are looking for a quick and free way to create still images from videos, this Windows-based tool is one of the least complicated options PC users have at their disposal. After you open Free Video to JPEG Converter you just have to click on the Add Files button and import a video from which you would like to extract still frames.
You can then specify the frequency at which frames are going to be extracted and see the total number of frames that are going to be created from your video. Afterward, you just have to specify the location at which the still frames are going to be saved and click on the Convert button.
5. Virtual Dub
Before you can start extracting still frames from videos with Virtual Dub, you must first install the FFMpeg plugin pack because this video converter cannot open common video file formats like MP4 or MOV. Installing this plugin can get a little technical, but it is far from being complicated. Afterward, you just have to launch Virtual Dub and import the video you would like to use to create JPEG files by clicking on the File menu and selecting the Open option.
Select the Frame Rate option from the Video menu and make sure that the checkbox next to the Decimate by setting is selected. Insert the frequency at which still frames are going to be captured into the box next to the Decimate by setting and click on the OK button. Head over to the File menu and select the Image Sequence option from the Export submenu. Before you start extracting still frames from a video you just have to select the file format of the output files, and then wait for Virtual Dub to complete the process.
Part 2: Converting Videos to JPEG or PNG Images Online
In case you don’t have access to a video or photo editing software and the process of extracting still frames from videos with VLC Media Player or Virtual Dub is too technical for you, there are a number of online solutions you can try. Here are some of the best web-based platforms you can use to convert videos to JPEG or PNG images.
1. Online-Convert
This file conversion platform enables you to convert audio files, documents, and eBooks, but its video to photo conversion options are not the best. You have to select the Image Converter tool and then choose the output format of the images you want to extract from the video. You can then upload a video file from Dropbox, Google Drive, or your computer’s hard drive.
Before the conversion, you can adjust the Quality Settings and choose if the compression is going to be high, medium, or low, but you must be logged in to save these changes. Click on the Start Conversion button when ready, and wait for the platform to process your video. Each frame of the video you uploaded is going to be converted into a photo and you can choose how many images you want to download or delete.
2. AConvert
Converting virtually any type of file with AConvert is easy, which means that you won’t have much trouble extracting JPEG files from your video. After you arrive at AConvert’s home page, you just have to click on the Image option and then choose if you want to import a file from your computer or cloud storage. The maximum size of the video file you can upload to AConvert is limited to just 200MB.
Once the video file you selected is uploaded to the platform you can choose the output file format and decide if you want to resize the images during the conversion or keep their original size. Click on the Convert Now button and then download the image files once the still frames are extracted from the video.
3. Online Converter
Online Converter offers a variety of image conversion options and it even enables you to convert raw format photos into JPEGs. Its Video to JPEG tool supports nearly all common video file formats, which enables you to extract still frames from videos without having to worry about their compatibility with this tool. You can either upload a video via URL or from a local hard drive, but its size cannot be larger than 200 MB.
The platform lets you choose if you want to cut a video clip, change its frame size or adjust its quality. Once you fine-tune all the settings click on the Convert button to start creating JPEG files from a video and then download the images to your computer.
4. IMG2GO
Editing or converting images with IMG2GO doesn’t require you to have any previous experience, since all the tools this platform offers are easy to use. Convert to JPEG tool can break down an entire video clip into photos in just a few moments. All you have to do is upload a file to the platform, adjust the settings and click on the Start button that is located at the bottom of the page.
The number of JPEG files IMG2GO will generate depends on the duration of the clip, which is the reason why it is better to extract still frames from shorter videos. Once the conversion process is completed you can choose if you want to save the images on the cloud or to a local hard drive.
5. Kapwing
Kapwing offers a collection of video editing tools you can use to merge multiple video clips together, add audio to video files or create subtitles. The Convert Video tool lets create MP3, GIF, JPEG, or MP4 files from a video file.
After you upload a video to Kapwing you just have to click on the JPEG option and use the slider below the Preview Window to specify the frame you want to convert into a photo. Click on the Create button and then proceed to share the image you created on social media or download it to your computer. Keep in mind that all still frames are going to be watermarked if you are not signed in to your Kapwing account.
You may also like: How to Convert SWF to MP4 Free for Windows/Mac/Online >>
Conclusion
Extracting a still frame is a routine task that requires a minimum amount of time or effort regardless of the tool you are using to perform this task. Even so, how fast this process is going to be, depends on the video converter you choose. Which video converter do you use to convert videos to JPEG or PNG images? Leave a comment below and let us know.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If a video is recorded at the standard frame rate , each second of that video will contain 24 individual images or frames. Nearly all modern video editing software products grant you access to each frame a video clip contains, which can be quite useful if you want to create a quick preview of the footage you are editing.
Even though converting a video to a photo is not something you can do, creating JPEG on PNG image files from the video you recorded with a smartphone or a professional video camera takes only a few moments of your time. Read on if you would like to learn how to extract still images from video clips in desktop-based and online video converters.
- Part 1: Convert Video to Still Images on Windows on Mac with Offline Software
- Part 2: Convert Video to JPG/PNG Images Online
Part 1: Converting Videos to JPEG and PNG Images with Desktop Video Converters for macOS and Windows
Exporting a single frame of a video clip is an easy task even amateur photo and video editors can perform effortlessly. Mac and PC users have a broad range of options at their disposal if they want to make still images from their videos. Let’s have a look at some of the best video converters you can use to capture still frames and create JPEG or PNG files.
1. Wondershare Filmora
Filmora is a video editing software that also offers the option to capture frames of all video clips you use in your projects after you launch the Filmora video editor, import a video file that contains the frames you would like to save as still images.
To extract still images with the original high quality, you can import and place these videos to Project Media and then double-click it to preview. In the preview window, click the Camera icon located in the lower right corner to take a snapshot. It is worth noting that you can only create PNG files with this video editing software, and you may need to change the photo format if PNG isn’t your choice.
Alternatively, you can use the CTRL+ALT+S keyboard shortcut to take a snapshot of the frame in a video clip. The image you created will be added to the Media tab automatically, and you can proceed to right-click on it and select the Reveal in Explorer option to gain access to the original file.
To extract still image from the video frame by frame, you can add the media asset to the timeline and use the playhead to find the frame you would like to extract from the video. When done, leave the playhead at the location on the timeline where the frame is located, and then click on the Snapshot icon.
Below is the video tutorial about how to convert Video to Images Filmora.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
2. Adobe Photoshop
This is arguably the best photo editing software ever created that grants you access to all the tools you need to manipulate pictures as you see fit. Adobe Photoshop also enables its users to edit videos, although in a limited capacity. In order to turn a video into a series of separate frames, you just have to import a video file into Adobe Photoshop by clicking on the file menu and selecting the Import option.
The video clip is going to be displayed on the timeline that is located at the bottom of the screen and you just have to specify the segment of that file you would like to break down into frames. You can do this by dragging the handles located above the video clip that allows you to set the start and end of the work area.
When done, head over to the File menu, and select the Render Video option from the Export submenu. After the Render Video window pops up on the screen, you have to change the Adobe Media Encoder option to Photoshop Image Sequence and then click on the Render button. You should keep in mind that the photo editor is going to create separate image files for all the frames that were within the work area you defined, which is why it is important to reduce the work area to the minimum in order to avoid generating hundreds of JPEG images.
3. VLC Media Player
Extracting still frames with VLC media players is a technical process that will require some understanding of the video editing process. Even so, you can still use this open-source software to generate PNG or JPEG files from your videos.
Select the Preferences option from the Tools menu and then click on the Video tab. Make sure that the All option is selected under Show Settings and scroll down until you find the Filters option and expand this menu. Locate the Scene Filter, click on it and then proceed to specify the format in which your images are going to be saved and adjust the Recording Ratio.
Click on the Save button to confirm the changes, then go back to the Filter submenu, and this time you should click on it rather than expand it. Locate the Scene Video filter, make sure that the checkbox next to it is selected, and click OK to complete the process.
Next time you play a video in VLC the media player will automatically capture still frames at the recording ratio you specified.
4. Free Video to JPEG Converter
If you are looking for a quick and free way to create still images from videos, this Windows-based tool is one of the least complicated options PC users have at their disposal. After you open Free Video to JPEG Converter you just have to click on the Add Files button and import a video from which you would like to extract still frames.
You can then specify the frequency at which frames are going to be extracted and see the total number of frames that are going to be created from your video. Afterward, you just have to specify the location at which the still frames are going to be saved and click on the Convert button.
5. Virtual Dub
Before you can start extracting still frames from videos with Virtual Dub, you must first install the FFMpeg plugin pack because this video converter cannot open common video file formats like MP4 or MOV. Installing this plugin can get a little technical, but it is far from being complicated. Afterward, you just have to launch Virtual Dub and import the video you would like to use to create JPEG files by clicking on the File menu and selecting the Open option.
Select the Frame Rate option from the Video menu and make sure that the checkbox next to the Decimate by setting is selected. Insert the frequency at which still frames are going to be captured into the box next to the Decimate by setting and click on the OK button. Head over to the File menu and select the Image Sequence option from the Export submenu. Before you start extracting still frames from a video you just have to select the file format of the output files, and then wait for Virtual Dub to complete the process.
Part 2: Converting Videos to JPEG or PNG Images Online
In case you don’t have access to a video or photo editing software and the process of extracting still frames from videos with VLC Media Player or Virtual Dub is too technical for you, there are a number of online solutions you can try. Here are some of the best web-based platforms you can use to convert videos to JPEG or PNG images.
1. Online-Convert
This file conversion platform enables you to convert audio files, documents, and eBooks, but its video to photo conversion options are not the best. You have to select the Image Converter tool and then choose the output format of the images you want to extract from the video. You can then upload a video file from Dropbox, Google Drive, or your computer’s hard drive.
Before the conversion, you can adjust the Quality Settings and choose if the compression is going to be high, medium, or low, but you must be logged in to save these changes. Click on the Start Conversion button when ready, and wait for the platform to process your video. Each frame of the video you uploaded is going to be converted into a photo and you can choose how many images you want to download or delete.
2. AConvert
Converting virtually any type of file with AConvert is easy, which means that you won’t have much trouble extracting JPEG files from your video. After you arrive at AConvert’s home page, you just have to click on the Image option and then choose if you want to import a file from your computer or cloud storage. The maximum size of the video file you can upload to AConvert is limited to just 200MB.
Once the video file you selected is uploaded to the platform you can choose the output file format and decide if you want to resize the images during the conversion or keep their original size. Click on the Convert Now button and then download the image files once the still frames are extracted from the video.
3. Online Converter
Online Converter offers a variety of image conversion options and it even enables you to convert raw format photos into JPEGs. Its Video to JPEG tool supports nearly all common video file formats, which enables you to extract still frames from videos without having to worry about their compatibility with this tool. You can either upload a video via URL or from a local hard drive, but its size cannot be larger than 200 MB.
The platform lets you choose if you want to cut a video clip, change its frame size or adjust its quality. Once you fine-tune all the settings click on the Convert button to start creating JPEG files from a video and then download the images to your computer.
4. IMG2GO
Editing or converting images with IMG2GO doesn’t require you to have any previous experience, since all the tools this platform offers are easy to use. Convert to JPEG tool can break down an entire video clip into photos in just a few moments. All you have to do is upload a file to the platform, adjust the settings and click on the Start button that is located at the bottom of the page.
The number of JPEG files IMG2GO will generate depends on the duration of the clip, which is the reason why it is better to extract still frames from shorter videos. Once the conversion process is completed you can choose if you want to save the images on the cloud or to a local hard drive.
5. Kapwing
Kapwing offers a collection of video editing tools you can use to merge multiple video clips together, add audio to video files or create subtitles. The Convert Video tool lets create MP3, GIF, JPEG, or MP4 files from a video file.
After you upload a video to Kapwing you just have to click on the JPEG option and use the slider below the Preview Window to specify the frame you want to convert into a photo. Click on the Create button and then proceed to share the image you created on social media or download it to your computer. Keep in mind that all still frames are going to be watermarked if you are not signed in to your Kapwing account.
You may also like: How to Convert SWF to MP4 Free for Windows/Mac/Online >>
Conclusion
Extracting a still frame is a routine task that requires a minimum amount of time or effort regardless of the tool you are using to perform this task. Even so, how fast this process is going to be, depends on the video converter you choose. Which video converter do you use to convert videos to JPEG or PNG images? Leave a comment below and let us know.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
If a video is recorded at the standard frame rate , each second of that video will contain 24 individual images or frames. Nearly all modern video editing software products grant you access to each frame a video clip contains, which can be quite useful if you want to create a quick preview of the footage you are editing.
Even though converting a video to a photo is not something you can do, creating JPEG on PNG image files from the video you recorded with a smartphone or a professional video camera takes only a few moments of your time. Read on if you would like to learn how to extract still images from video clips in desktop-based and online video converters.
- Part 1: Convert Video to Still Images on Windows on Mac with Offline Software
- Part 2: Convert Video to JPG/PNG Images Online
Part 1: Converting Videos to JPEG and PNG Images with Desktop Video Converters for macOS and Windows
Exporting a single frame of a video clip is an easy task even amateur photo and video editors can perform effortlessly. Mac and PC users have a broad range of options at their disposal if they want to make still images from their videos. Let’s have a look at some of the best video converters you can use to capture still frames and create JPEG or PNG files.
1. Wondershare Filmora
Filmora is a video editing software that also offers the option to capture frames of all video clips you use in your projects after you launch the Filmora video editor, import a video file that contains the frames you would like to save as still images.
To extract still images with the original high quality, you can import and place these videos to Project Media and then double-click it to preview. In the preview window, click the Camera icon located in the lower right corner to take a snapshot. It is worth noting that you can only create PNG files with this video editing software, and you may need to change the photo format if PNG isn’t your choice.
Alternatively, you can use the CTRL+ALT+S keyboard shortcut to take a snapshot of the frame in a video clip. The image you created will be added to the Media tab automatically, and you can proceed to right-click on it and select the Reveal in Explorer option to gain access to the original file.
To extract still image from the video frame by frame, you can add the media asset to the timeline and use the playhead to find the frame you would like to extract from the video. When done, leave the playhead at the location on the timeline where the frame is located, and then click on the Snapshot icon.
Below is the video tutorial about how to convert Video to Images Filmora.
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
2. Adobe Photoshop
This is arguably the best photo editing software ever created that grants you access to all the tools you need to manipulate pictures as you see fit. Adobe Photoshop also enables its users to edit videos, although in a limited capacity. In order to turn a video into a series of separate frames, you just have to import a video file into Adobe Photoshop by clicking on the file menu and selecting the Import option.
The video clip is going to be displayed on the timeline that is located at the bottom of the screen and you just have to specify the segment of that file you would like to break down into frames. You can do this by dragging the handles located above the video clip that allows you to set the start and end of the work area.
When done, head over to the File menu, and select the Render Video option from the Export submenu. After the Render Video window pops up on the screen, you have to change the Adobe Media Encoder option to Photoshop Image Sequence and then click on the Render button. You should keep in mind that the photo editor is going to create separate image files for all the frames that were within the work area you defined, which is why it is important to reduce the work area to the minimum in order to avoid generating hundreds of JPEG images.
3. VLC Media Player
Extracting still frames with VLC media players is a technical process that will require some understanding of the video editing process. Even so, you can still use this open-source software to generate PNG or JPEG files from your videos.
Select the Preferences option from the Tools menu and then click on the Video tab. Make sure that the All option is selected under Show Settings and scroll down until you find the Filters option and expand this menu. Locate the Scene Filter, click on it and then proceed to specify the format in which your images are going to be saved and adjust the Recording Ratio.
Click on the Save button to confirm the changes, then go back to the Filter submenu, and this time you should click on it rather than expand it. Locate the Scene Video filter, make sure that the checkbox next to it is selected, and click OK to complete the process.
Next time you play a video in VLC the media player will automatically capture still frames at the recording ratio you specified.
4. Free Video to JPEG Converter
If you are looking for a quick and free way to create still images from videos, this Windows-based tool is one of the least complicated options PC users have at their disposal. After you open Free Video to JPEG Converter you just have to click on the Add Files button and import a video from which you would like to extract still frames.
You can then specify the frequency at which frames are going to be extracted and see the total number of frames that are going to be created from your video. Afterward, you just have to specify the location at which the still frames are going to be saved and click on the Convert button.
5. Virtual Dub
Before you can start extracting still frames from videos with Virtual Dub, you must first install the FFMpeg plugin pack because this video converter cannot open common video file formats like MP4 or MOV. Installing this plugin can get a little technical, but it is far from being complicated. Afterward, you just have to launch Virtual Dub and import the video you would like to use to create JPEG files by clicking on the File menu and selecting the Open option.
Select the Frame Rate option from the Video menu and make sure that the checkbox next to the Decimate by setting is selected. Insert the frequency at which still frames are going to be captured into the box next to the Decimate by setting and click on the OK button. Head over to the File menu and select the Image Sequence option from the Export submenu. Before you start extracting still frames from a video you just have to select the file format of the output files, and then wait for Virtual Dub to complete the process.
Part 2: Converting Videos to JPEG or PNG Images Online
In case you don’t have access to a video or photo editing software and the process of extracting still frames from videos with VLC Media Player or Virtual Dub is too technical for you, there are a number of online solutions you can try. Here are some of the best web-based platforms you can use to convert videos to JPEG or PNG images.
1. Online-Convert
This file conversion platform enables you to convert audio files, documents, and eBooks, but its video to photo conversion options are not the best. You have to select the Image Converter tool and then choose the output format of the images you want to extract from the video. You can then upload a video file from Dropbox, Google Drive, or your computer’s hard drive.
Before the conversion, you can adjust the Quality Settings and choose if the compression is going to be high, medium, or low, but you must be logged in to save these changes. Click on the Start Conversion button when ready, and wait for the platform to process your video. Each frame of the video you uploaded is going to be converted into a photo and you can choose how many images you want to download or delete.
2. AConvert
Converting virtually any type of file with AConvert is easy, which means that you won’t have much trouble extracting JPEG files from your video. After you arrive at AConvert’s home page, you just have to click on the Image option and then choose if you want to import a file from your computer or cloud storage. The maximum size of the video file you can upload to AConvert is limited to just 200MB.
Once the video file you selected is uploaded to the platform you can choose the output file format and decide if you want to resize the images during the conversion or keep their original size. Click on the Convert Now button and then download the image files once the still frames are extracted from the video.
3. Online Converter
Online Converter offers a variety of image conversion options and it even enables you to convert raw format photos into JPEGs. Its Video to JPEG tool supports nearly all common video file formats, which enables you to extract still frames from videos without having to worry about their compatibility with this tool. You can either upload a video via URL or from a local hard drive, but its size cannot be larger than 200 MB.
The platform lets you choose if you want to cut a video clip, change its frame size or adjust its quality. Once you fine-tune all the settings click on the Convert button to start creating JPEG files from a video and then download the images to your computer.
4. IMG2GO
Editing or converting images with IMG2GO doesn’t require you to have any previous experience, since all the tools this platform offers are easy to use. Convert to JPEG tool can break down an entire video clip into photos in just a few moments. All you have to do is upload a file to the platform, adjust the settings and click on the Start button that is located at the bottom of the page.
The number of JPEG files IMG2GO will generate depends on the duration of the clip, which is the reason why it is better to extract still frames from shorter videos. Once the conversion process is completed you can choose if you want to save the images on the cloud or to a local hard drive.
5. Kapwing
Kapwing offers a collection of video editing tools you can use to merge multiple video clips together, add audio to video files or create subtitles. The Convert Video tool lets create MP3, GIF, JPEG, or MP4 files from a video file.
After you upload a video to Kapwing you just have to click on the JPEG option and use the slider below the Preview Window to specify the frame you want to convert into a photo. Click on the Create button and then proceed to share the image you created on social media or download it to your computer. Keep in mind that all still frames are going to be watermarked if you are not signed in to your Kapwing account.
You may also like: How to Convert SWF to MP4 Free for Windows/Mac/Online >>
Conclusion
Extracting a still frame is a routine task that requires a minimum amount of time or effort regardless of the tool you are using to perform this task. Even so, how fast this process is going to be, depends on the video converter you choose. Which video converter do you use to convert videos to JPEG or PNG images? Leave a comment below and let us know.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Best Free Video Watermarking Tools: Top Picks
Top 6 Free Video Watermark Software
Ollie Mattison
Mar 27, 2024• Proven solutions
Format FactoryNowadays, people are tending to sharing images and videos on Facebook , Instagram with putting watermark or logo on it. Adding watermark to your video can avoid unauthorized use and copying of it as well as promote your brand and company. It can also make the video more personalized and special.
There is many video editing software available to adding your logo/watermark to videos, but in this article, I will share top 5 free video editing tools for watermarking your videos. Read on and learn more about these free watermark software so you can weigh your options on which video watermarking software to use.
Wondershare AniEraser Seamless, Effortless, Intuitive.
AniEraser makes it easy to perfect any photo or video; no matter the device or platform - experience a smooth, effortless transformation of your image and maximize its potential with just one click.
Make your moment perfect.
Free Download Free Download Edit online
Recommended video editing software to add logo/watermark to video
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Besides the free video watermarking software, here I highly recommend paid video editing software- Wondershare Filmora . It’s definitely a better option since it’s more convenient to use because of its user-friendly interface. Even if you’re not a pro in video editing, you can watermark and edit your videos with ease. You just have to drag-n-drop the images or logos from your computer or other external devices for watermarking. Here is a detailed guide about how to add logo/watermark to video in Filmora.
Why you should use Filmora to add Logo/watermark? As you may see from the video above, in Filmora:
- you can add text as a watermark, an image and even a video as watermark;
- adjust the watermark position to anywhere in the video;
- apply various built-in text and titles effects to the logo and watermark file
- fine tune the image watermark opacity and blend it to video in a much better way
For the step-by-step tutorial about adding watermark/logo to video, you can check our article about How to watermark a video with videos and photos . Filmora is available on both Windows and Mac and it is free to download, you can click the download button above and give it a try.
Top 6 Free Video Watermark Software
1. Wondershare Filmora
Filmora is one of the cheapest and best video editor you can find in the market. You can use it to add a simple text watermark or an image watermark as you like. You can adjust everything of the watermark: position, duration and transparency, etc. With thousands of transitions, you can decide when and how the watermark is going to appear and disappear. For detailed information about how to add watermark, check our article How to add watermark in Filmora>>
3. YouTube Studio
If you will share video footage on YouTube, then you can use the Branding feature to add a watermark to YouTube videos. Branding feature enables you to embed a chosen YouTube video or your channel logo across all of the videos on your channel. With it, you can add watermark your YouTube videos with a few clicks without having to edit the original video.
Just navigate to Customisation, find Branding option and then click Video watermark to continue. You will then asked to upload a watermark image. Click Choose File button and pick your watermark image to upload. It is recommended to upload a watermark image under 1M size best in PNG or GIF format. Click Save and your watermark will show on all your uploaded videos. You can custom the display time of the watermark, or choose to display the watermark in the entire video or at the end of the video.
4. Jahshaka
JahShaka is a commonly used open-source video editing tool. It boasts support for almost all major operating systems. There are also a ton of tutorials of this application which you can make full use of. Follow along with the instructions of watermarking and you should be the master of this tool.
5. VirtualDub
VirtualDub is one powerful video editing software with many features in-tact that can help you perform different changes to the video whilst maintaining the video’s quality. You can also use it to add watermarks to your video with the logo filter for free. Refer to this guide to get more information about how to add watermarks using this tool.
6. Format Factory
Format Factory is a free, fully-featured multimedia converter that lets you convert audio, video, and even images, between the most popular formats. It also has the watermark function which enables you to add watermark to your video for free.
Conclusion
These are the top 5 free video editing software that you can use to add logos and watermarks to the video. Of course, if you are a Mac user, you can use the pre-installed video editor iMovie or Filmora to add a logo and watermark to the video. For the details, check how to add watermark to video with iMovie, click to check the details .
No matter you are a Windows user or a Mac user, you can always use Filmora to watermark the video. For more details about the features of Filmora, watch the video below and download it to have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Format FactoryNowadays, people are tending to sharing images and videos on Facebook , Instagram with putting watermark or logo on it. Adding watermark to your video can avoid unauthorized use and copying of it as well as promote your brand and company. It can also make the video more personalized and special.
There is many video editing software available to adding your logo/watermark to videos, but in this article, I will share top 5 free video editing tools for watermarking your videos. Read on and learn more about these free watermark software so you can weigh your options on which video watermarking software to use.
Wondershare AniEraser Seamless, Effortless, Intuitive.
AniEraser makes it easy to perfect any photo or video; no matter the device or platform - experience a smooth, effortless transformation of your image and maximize its potential with just one click.
Make your moment perfect.
Free Download Free Download Edit online
Recommended video editing software to add logo/watermark to video
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Besides the free video watermarking software, here I highly recommend paid video editing software- Wondershare Filmora . It’s definitely a better option since it’s more convenient to use because of its user-friendly interface. Even if you’re not a pro in video editing, you can watermark and edit your videos with ease. You just have to drag-n-drop the images or logos from your computer or other external devices for watermarking. Here is a detailed guide about how to add logo/watermark to video in Filmora.
Why you should use Filmora to add Logo/watermark? As you may see from the video above, in Filmora:
- you can add text as a watermark, an image and even a video as watermark;
- adjust the watermark position to anywhere in the video;
- apply various built-in text and titles effects to the logo and watermark file
- fine tune the image watermark opacity and blend it to video in a much better way
For the step-by-step tutorial about adding watermark/logo to video, you can check our article about How to watermark a video with videos and photos . Filmora is available on both Windows and Mac and it is free to download, you can click the download button above and give it a try.
Top 6 Free Video Watermark Software
1. Wondershare Filmora
Filmora is one of the cheapest and best video editor you can find in the market. You can use it to add a simple text watermark or an image watermark as you like. You can adjust everything of the watermark: position, duration and transparency, etc. With thousands of transitions, you can decide when and how the watermark is going to appear and disappear. For detailed information about how to add watermark, check our article How to add watermark in Filmora>>
3. YouTube Studio
If you will share video footage on YouTube, then you can use the Branding feature to add a watermark to YouTube videos. Branding feature enables you to embed a chosen YouTube video or your channel logo across all of the videos on your channel. With it, you can add watermark your YouTube videos with a few clicks without having to edit the original video.
Just navigate to Customisation, find Branding option and then click Video watermark to continue. You will then asked to upload a watermark image. Click Choose File button and pick your watermark image to upload. It is recommended to upload a watermark image under 1M size best in PNG or GIF format. Click Save and your watermark will show on all your uploaded videos. You can custom the display time of the watermark, or choose to display the watermark in the entire video or at the end of the video.
4. Jahshaka
JahShaka is a commonly used open-source video editing tool. It boasts support for almost all major operating systems. There are also a ton of tutorials of this application which you can make full use of. Follow along with the instructions of watermarking and you should be the master of this tool.
5. VirtualDub
VirtualDub is one powerful video editing software with many features in-tact that can help you perform different changes to the video whilst maintaining the video’s quality. You can also use it to add watermarks to your video with the logo filter for free. Refer to this guide to get more information about how to add watermarks using this tool.
6. Format Factory
Format Factory is a free, fully-featured multimedia converter that lets you convert audio, video, and even images, between the most popular formats. It also has the watermark function which enables you to add watermark to your video for free.
Conclusion
These are the top 5 free video editing software that you can use to add logos and watermarks to the video. Of course, if you are a Mac user, you can use the pre-installed video editor iMovie or Filmora to add a logo and watermark to the video. For the details, check how to add watermark to video with iMovie, click to check the details .
No matter you are a Windows user or a Mac user, you can always use Filmora to watermark the video. For more details about the features of Filmora, watch the video below and download it to have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Format FactoryNowadays, people are tending to sharing images and videos on Facebook , Instagram with putting watermark or logo on it. Adding watermark to your video can avoid unauthorized use and copying of it as well as promote your brand and company. It can also make the video more personalized and special.
There is many video editing software available to adding your logo/watermark to videos, but in this article, I will share top 5 free video editing tools for watermarking your videos. Read on and learn more about these free watermark software so you can weigh your options on which video watermarking software to use.
Wondershare AniEraser Seamless, Effortless, Intuitive.
AniEraser makes it easy to perfect any photo or video; no matter the device or platform - experience a smooth, effortless transformation of your image and maximize its potential with just one click.
Make your moment perfect.
Free Download Free Download Edit online
Recommended video editing software to add logo/watermark to video
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Besides the free video watermarking software, here I highly recommend paid video editing software- Wondershare Filmora . It’s definitely a better option since it’s more convenient to use because of its user-friendly interface. Even if you’re not a pro in video editing, you can watermark and edit your videos with ease. You just have to drag-n-drop the images or logos from your computer or other external devices for watermarking. Here is a detailed guide about how to add logo/watermark to video in Filmora.
Why you should use Filmora to add Logo/watermark? As you may see from the video above, in Filmora:
- you can add text as a watermark, an image and even a video as watermark;
- adjust the watermark position to anywhere in the video;
- apply various built-in text and titles effects to the logo and watermark file
- fine tune the image watermark opacity and blend it to video in a much better way
For the step-by-step tutorial about adding watermark/logo to video, you can check our article about How to watermark a video with videos and photos . Filmora is available on both Windows and Mac and it is free to download, you can click the download button above and give it a try.
Top 6 Free Video Watermark Software
1. Wondershare Filmora
Filmora is one of the cheapest and best video editor you can find in the market. You can use it to add a simple text watermark or an image watermark as you like. You can adjust everything of the watermark: position, duration and transparency, etc. With thousands of transitions, you can decide when and how the watermark is going to appear and disappear. For detailed information about how to add watermark, check our article How to add watermark in Filmora>>
3. YouTube Studio
If you will share video footage on YouTube, then you can use the Branding feature to add a watermark to YouTube videos. Branding feature enables you to embed a chosen YouTube video or your channel logo across all of the videos on your channel. With it, you can add watermark your YouTube videos with a few clicks without having to edit the original video.
Just navigate to Customisation, find Branding option and then click Video watermark to continue. You will then asked to upload a watermark image. Click Choose File button and pick your watermark image to upload. It is recommended to upload a watermark image under 1M size best in PNG or GIF format. Click Save and your watermark will show on all your uploaded videos. You can custom the display time of the watermark, or choose to display the watermark in the entire video or at the end of the video.
4. Jahshaka
JahShaka is a commonly used open-source video editing tool. It boasts support for almost all major operating systems. There are also a ton of tutorials of this application which you can make full use of. Follow along with the instructions of watermarking and you should be the master of this tool.
5. VirtualDub
VirtualDub is one powerful video editing software with many features in-tact that can help you perform different changes to the video whilst maintaining the video’s quality. You can also use it to add watermarks to your video with the logo filter for free. Refer to this guide to get more information about how to add watermarks using this tool.
6. Format Factory
Format Factory is a free, fully-featured multimedia converter that lets you convert audio, video, and even images, between the most popular formats. It also has the watermark function which enables you to add watermark to your video for free.
Conclusion
These are the top 5 free video editing software that you can use to add logos and watermarks to the video. Of course, if you are a Mac user, you can use the pre-installed video editor iMovie or Filmora to add a logo and watermark to the video. For the details, check how to add watermark to video with iMovie, click to check the details .
No matter you are a Windows user or a Mac user, you can always use Filmora to watermark the video. For more details about the features of Filmora, watch the video below and download it to have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Ollie Mattison
Mar 27, 2024• Proven solutions
Format FactoryNowadays, people are tending to sharing images and videos on Facebook , Instagram with putting watermark or logo on it. Adding watermark to your video can avoid unauthorized use and copying of it as well as promote your brand and company. It can also make the video more personalized and special.
There is many video editing software available to adding your logo/watermark to videos, but in this article, I will share top 5 free video editing tools for watermarking your videos. Read on and learn more about these free watermark software so you can weigh your options on which video watermarking software to use.
Wondershare AniEraser Seamless, Effortless, Intuitive.
AniEraser makes it easy to perfect any photo or video; no matter the device or platform - experience a smooth, effortless transformation of your image and maximize its potential with just one click.
Make your moment perfect.
Free Download Free Download Edit online
Recommended video editing software to add logo/watermark to video
Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )
Besides the free video watermarking software, here I highly recommend paid video editing software- Wondershare Filmora . It’s definitely a better option since it’s more convenient to use because of its user-friendly interface. Even if you’re not a pro in video editing, you can watermark and edit your videos with ease. You just have to drag-n-drop the images or logos from your computer or other external devices for watermarking. Here is a detailed guide about how to add logo/watermark to video in Filmora.
Why you should use Filmora to add Logo/watermark? As you may see from the video above, in Filmora:
- you can add text as a watermark, an image and even a video as watermark;
- adjust the watermark position to anywhere in the video;
- apply various built-in text and titles effects to the logo and watermark file
- fine tune the image watermark opacity and blend it to video in a much better way
For the step-by-step tutorial about adding watermark/logo to video, you can check our article about How to watermark a video with videos and photos . Filmora is available on both Windows and Mac and it is free to download, you can click the download button above and give it a try.
Top 6 Free Video Watermark Software
1. Wondershare Filmora
Filmora is one of the cheapest and best video editor you can find in the market. You can use it to add a simple text watermark or an image watermark as you like. You can adjust everything of the watermark: position, duration and transparency, etc. With thousands of transitions, you can decide when and how the watermark is going to appear and disappear. For detailed information about how to add watermark, check our article How to add watermark in Filmora>>
3. YouTube Studio
If you will share video footage on YouTube, then you can use the Branding feature to add a watermark to YouTube videos. Branding feature enables you to embed a chosen YouTube video or your channel logo across all of the videos on your channel. With it, you can add watermark your YouTube videos with a few clicks without having to edit the original video.
Just navigate to Customisation, find Branding option and then click Video watermark to continue. You will then asked to upload a watermark image. Click Choose File button and pick your watermark image to upload. It is recommended to upload a watermark image under 1M size best in PNG or GIF format. Click Save and your watermark will show on all your uploaded videos. You can custom the display time of the watermark, or choose to display the watermark in the entire video or at the end of the video.
4. Jahshaka
JahShaka is a commonly used open-source video editing tool. It boasts support for almost all major operating systems. There are also a ton of tutorials of this application which you can make full use of. Follow along with the instructions of watermarking and you should be the master of this tool.
5. VirtualDub
VirtualDub is one powerful video editing software with many features in-tact that can help you perform different changes to the video whilst maintaining the video’s quality. You can also use it to add watermarks to your video with the logo filter for free. Refer to this guide to get more information about how to add watermarks using this tool.
6. Format Factory
Format Factory is a free, fully-featured multimedia converter that lets you convert audio, video, and even images, between the most popular formats. It also has the watermark function which enables you to add watermark to your video for free.
Conclusion
These are the top 5 free video editing software that you can use to add logos and watermarks to the video. Of course, if you are a Mac user, you can use the pre-installed video editor iMovie or Filmora to add a logo and watermark to the video. For the details, check how to add watermark to video with iMovie, click to check the details .
No matter you are a Windows user or a Mac user, you can always use Filmora to watermark the video. For more details about the features of Filmora, watch the video below and download it to have a try.
Ollie Mattison
Ollie Mattison is a writer and a lover of all things video.
Follow @Ollie Mattison
Also read:
- New Free Online Subtitle Solutions Top 10 Rankings
- 2024 Approved Cropping Like a Pro Advanced Techniques for Avidemux Users
- 2024 Approved Click-Worthy Thumbnails Proven Techniques for YouTube Success
- New Convert Facebook Videos to MP3 Top Online Converters
- 2024 Approved Free Images for Commercial Purposes The Ultimate List
- Updated From Crop to Perfection Mastering Image Ratio Adjustment Techniques
- In 2024, Apples Finest Top Video Editing Software for Mac Users
- In 2024, From Tape to Screen Best VHS Players for Mobile
- Record Your Gameplay 3 Simple and Effective Ways
- Updated Fast Forward Your Videos A Beginners Guide to Time Lapse Photography
- From Still to Motion The Top Animated Photo Makers
- Edit Like a Pro Top 8 Video Editing Apps for 4K Proxy
- Updated Get Adobe Premiere Pro CS6 Mac Edition (Free Download Link)
- How to Split Videos in Windows Live Movie Maker
- New Top Free Video Smoothing Tools for PC and Mac
- Updated From Beginner to Pro 6 Adobe Premiere Tips to Improve Your Video Editing
- Free Online Video Invitation Designers Top Picks
- Create Stunning Videos with Music Top Online Video Editor Picks for 2024
- Easter Eggstravaganza Wondershare Filmora Promo Code Inside for 2024
- Updated How to Add Titles in Final Cut Pro X
- 2024 Approved FilmForge Mac
- Filmora on a Budget How to Get It Without Breaking the Bank or the Law
- Convert Instagram Videos to MP3 A Step-by-Step Guide
- Unlock Exclusive Deals Top 4 Methods to Get Filmora Discounts
- Simplify Video Editing on Mac with MKVtoolnix
- Effortless Video Editing A Beginners Guide to Camtasia Speed Adjustment
- 2024 Approved Best Windows Movie Maker Alternatives for Windows
- How to Unlock a Network Locked Itel S23+ Phone?
- How Can OnePlus Ace 2 ProMirror Share to PC? | Dr.fone
- A Detailed VPNa Fake GPS Location Free Review On Itel A70 | Dr.fone
- In 2024, How to Move Custom Ringtones from Apple iPhone SE (2020) to Android? | Dr.fone
- Can Life360 Track Or See Text Messages? What Can You Do with Life360 On ZTE Axon 40 Lite? | Dr.fone
- In 2024, How to get the dragon scale and evolution-enabled pokemon On Tecno Phantom V Fold? | Dr.fone
- Restore Missing App Icon on Infinix Hot 40 Step-by-Step Solutions | Dr.fone
- What is Fake GPS Location Pro and Is It Good On OnePlus Open? | Dr.fone
- Will iSpoofer update On Samsung Galaxy M54 5G | Dr.fone
- 7 Solutions to Fix Chrome Crashes or Wont Open on Sony Xperia 10 V | Dr.fone
- In 2024, For People Wanting to Mock GPS on Xiaomi 13T Pro Devices | Dr.fone
- In 2024, Full Guide to Fix iToolab AnyGO Not Working On Poco M6 Pro 4G | Dr.fone
- Title: FCP 2023 The Ultimate Guide to Editing and Mixing Audio for Video for 2024
- Author: Giselle
- Created at : 2024-04-25 07:34:55
- Updated at : 2024-04-26 07:34:55
- Link: https://ai-vdieo-software.techidaily.com/fcp-2023-the-ultimate-guide-to-editing-and-mixing-audio-for-video-for-2024/
- License: This work is licensed under CC BY-NC-SA 4.0.
